EV34C6 Series • RoHS Compliant (Pb-Free) • Voltage Controlled Crystal Oscillator (VCXO) • 2.5V Supply Voltage • LVCMOS output with Tri-State function • Ceramic 6-pad SMD package • APR Performance to ±100ppm • Commercial and Industrial Temperature Range EV34C6 H L W 1.65 7.0 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS 1.544MHz, 2.000MHz, 2.048MHz, 3.088MHz, 3.580MHz, 3.686MHz, 4.000MHz, 4.032MHz, 4.096MHz, 4.434MHz, 5.000MHz, 6.144MHz, 6.176MHz, 6.312MHz, 6.400MHz, 8.000MHz, 8.192MHz, 8.448MHz, 10.000MHz, 12.000MHz, 12.288MHz, 12.352MHz, 12.960MHz, 13.000MHz, 13.500MHz, 14.318MHz, 15.360MHz, 15.440MHz, 16.000MHz, 16.384MHz, 16.660MHz, 17.664MHz, 18.432MHz, 19.200MHz, 19.440MHz, 20.000MHz, 20.480MHz, 24.000MHz, 24.576MHz, 24.704MHz, 25.000MHz, 25.920MHz, 26.000MHz, 27.000MHz, 28.636MHz, 30.000MHz, 30.720MHz, 32.000MHz, 32.768MHz, 34.368MHz, 35.328MHz, 36.864MHz, 38.880MHz, 40.000MHz, 40.960MHz, 44.736MHz, 49.152MHz, 50.000MHz, 51.840MHz, 52.000MHz, 62.208MHz, 65.536MHz, 74.250MHz, 77.760MHz Operating Temperature Range (OTR) 0°C to +70°C or -40°C to +85°C Storage Temperature Range (STR) -55°C to 125°C Supply Voltage (VDD) 2.5VDC ±5% Input Current (IDD) 15mA Maximum Frequency Tolerance/Stability Inclusive of All Conditions: Calibration Tolerance at 25°C, ±50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, and Vibration. Output Voltage Logic High (VOH) IOH = -4mA 90% of VDD Minimum Output Voltage Logic Low (VOL) IOL = +4mA 10% of VDD Maximum Rise Time / Fall Time (TR/TF) 20% to 80% of Waveform 5 nSeconds Maximum Duty Cycle (SYM) at 50% of Waveform 50 ±5(%) Typical, 50 ±10(%) Maximum Load Drive Capability (CLOAD) 15pF Maximum Aging (at 25°C) ±2ppm/1st year typical, ±10ppm /10 years Max. Start Up Time (TS) 10 mSeconds Maximum Tri-State Input Voltage VIH: No Connection Enables Output VIH: >0.9VDD Enables Output VIL: <0.1VDD Disables Output: High Impedance RMS Phase Jitter FJ=12kHz to 20MHz 1pSec Maximum Absolute Pull Range (APR) Inclusive of All Conditions: Calibration Tolerance at 25°C, ±50ppm Minimum Frequency Stability over the Operating Temperature Range, Supply ±80ppm Minimum < 51.840MHz only Voltage Change, Output Load Change, Shock, Vibration, and Aging ±100ppm Minimum < 36.000MHz only over Control Voltage (VC) Linearity 10% Typical, 20% Maximum Control Voltage (VC): Test Conditions for APR 0.2VDC to 2.3VDC Control Voltage Range (VCR) 0.0VDC to VDD Transfer Function Positive Transfer Characteristic Input Impedance (ZI) 50kOhms Minimum Input Leakage Current 10µA Maximum Modulation Bandwidth (MBW) -3dB, VC = 1.25VDC 10kHz Minimum Typical Phase Noise (Fo = 27.000MHz) At offset of 10Hz -65dBc/Hz At offset of 100Hz -95dBc/Hz At offset of 1kHz -120dBc/Hz At offset of 10kHz -142dBc/Hz At offset of 100kHz -152dBc/Hz At offset of 1MHz -154dBc/Hz Frequency Range (FO) MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EV34C6 CERAMIC 2.5V OS7J 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 09/09 Specifications subject to change without notice. PART NUMBERING GUIDE EV34C6 B 3 A 1 - 35.328M TR AVAILABLE OPTIONS Blank=Bulk (Standard) TR=Tape and Reel OPERATING TEMPERATURE RANGE A=0°C to +70°C, B=-40°C to +85°C FREQUENCY ABSOLUTE PULL RANGE (APR) 3=±50ppm Minimum 4=±80ppm Minimum 5=±100ppm Minimum DUTY CYCLE 1=50 ±5(%) Typical, 50 ±10(%) Maximum LINEARITY A=10% Typical, 20% Maximum MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Control Voltage (VC) Pin 2: Tri-State Pin 3: Case Ground TAPE AND REEL DIMENSIONS Pin 4: Output Pin 5: No Connect Pin 6: Supply Voltage Tolerances= +0.1 ALL DIMENSIONS IN MILLIMETERS TAPE A B C D E 16±.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 F G H J K 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL L K0* R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification ESD Susceptibility Fine Leak Test Flammability Gross Leak Test Mechanical Shock Moisture Resistance Moisture Sensitivity Resistance to Soldering Heat Resistance to Solvents Solderability Temperature Cycling Vibration MIL-STD-883, Method 3015, Class 1, HBM: 1500V MIL-STD-883, Method 1014, Condition A UL94-V0 MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 1004 J-STD-020, MSL 1 MIL-STD-202, Method 210, Condition K MIL-STD-202, Method 215 MIL-STD-883, Method 2003 MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 2007, Condition A Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EV34C6 CERAMIC 2.5V OS7J 09/09 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.