FS6322-04 Three-PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. April 2000 1.0 Features 2.0 • Three PLLs with deep reference, feedback, and post dividers to provide precision clock frequencies • Multiple outputs provide several clocking options • Outputs may be tristated for board testing • S0, S1, and S2 inputs modify output frequencies for design flexibility • 3.3V operation • Accepts 5 to 30MHz crystals (see Frequency Table for specific reference frequencies required) • Custom frequency patterns, pinouts, and packages are available. Contact your local AMI Sales Representative for more information. Description The FS6322 is a ROM-based CMOS clock generator IC designed to minimize cost and component count in a variety of electronic systems. Three low-jitter phase-locked loops (PLLs) drive up to five low-skew clock outputs to provide a high degree of flexibility. The device is packaged in a 16-pin SOIC to minimize board space. High-resolution divider capability permits generation of desired frequencies. Figure 1: Pin Configuration 1 16 OE VDD 2 15 S2 VSS 3 14 VDD XOUT/REFIN 4 13 S1 XIN 5 12 S0 CLK_E 6 11 VSS CLK_D 7 10 CLK_A CLK_F 8 9 CLK_B FS6322 CLK_C 16-pin (0.150”) SOIC Figure 2: Block Diagram OE XIN XOUT Crystal Oscillator CLK_A CLK_B PLL A PLL B Clock Logic CLK_D CLK_E PLL C S2:S0 Device Control CLK_C CLK_F FS6322-04 This document contains information on a product under development. American Microsystems, Inc. reserves the right to change or discontinue this product without notice. ISO9001 4.26.00 FS6322-04 Three-PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. April 2000 Table 1: Pin Descriptions Key: AI = Analog Input; AO = Analog Output; DI = Digital Input; DIU = Input with Internal Pull-Up; DID = Input with Internal Pull-Down; DIO = Digital Input/Output; DI-3 = Three-Level Digital Input, DO = Digital Output; P = Power/Ground; # = Active Low pin PIN TYPE NAME DESCRIPTION 1 DO CLK_C C clock output 2 P VDD 3 P VSS 4 AI XOUT / REFIN Power supply (3.3V nominal – see version specific information) Ground Crystal oscillator drive / external reference input 5 AO XIN 6 DO CLK_E E clock output Crystal oscillator feedback 7 DO CLK_D D clock output 8 DO CLK_F F clock output 9 DO CLK_B A clock output 10 DO CLK_A B clock output 11 P VSS Ground 12 DI U S0 Frequency select control input 13 DIU S1 Frequency select control input 14 P VDD 15 DIU S2 Frequency select control input 16 DIU OE Output enable input: logic-high enables outputs; logic-low tristates outputs (high impedance) Power supply (5V to 3.3V) Table 2: Frequency Table – FS6322-04 (3.3volt) S2 S1 S0 FREF CLK_A (pin 10) 0 0 0 29.838 0.00000 0 0 1 27.000 0 1 0 0 1 1 1 0 0 29.838 1 0 1 27.000 1 1 0 1 1 1 CLK_B (pin 9) CLK_C (pin 1) 48.00026 0.00000 (FREF*37/23) 2.81600 24.57600 11.28960 (FREF*352/3375) (FREF*1024/1125) (FREF*784/1875) CLK_D (pin 7) CLK_E (pin 6) CLK_F (pin 8) 24.61635 29.83800 (FREF) 0.00000 27.00000 (FREF) 0.00000 29.83800 (FREF) 0.00000 27.00000 (FREF) 0.00000 (FREF*33/40) 0.00000 DO NOT USE 0.00000 48.00026 29.49105 24.61635 (FREF*37/23) (FREF*85/86) (FREF*33/40) 2.81600 24.57600 5.63200 (FREF*352/3375) (FREF*1024/1125) (FREF*704/3375) 0.00000 DO NOT USE 2 4.26.00 FS6322-04 Three-PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. April 2000 3.0 Electrical Specifications Table 3: Absolute Maximum Ratings Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These conditions represent a stress rating only, and functional operation of the device at these or any other conditions above the operational limits noted in this specification is not implied. Exposure to maximum rating conditions for extended conditions may affect device performance, functionality, and reliability. PARAMETER Supply Voltage, dc (VSS = ground) SYMBOL MIN. MAX. UNITS VDD VSS-0.5 7 V Input Voltage, dc VI VSS-0.5 VDD+0.5 V Output Voltage, dc VO VSS-0.5 VDD+0.5 V Input Clamp Current, dc (VI < 0 or VI > VDD) IIK -50 50 mA Output Clamp Current, dc (VI < 0 or VI > VDD) IOK -50 50 mA Storage Temperature Range (non-condensing) TS -65 150 °C Ambient Temperature Range, Under Bias TA -55 125 °C Junction Temperature TJ 150 °C Lead Temperature (soldering, 10s) Input Static Discharge Voltage Protection (MIL-STD 883E, Method 3015.7) 260 °C 2 kV CAUTION: ELECTROSTATIC SENSITIVE DEVICE Permanent damage resulting in a loss of functionality or performance may occur if this device is subjected to a high-energy electrostatic discharge. Table 4: Operating Conditions PARAMETER SYMBOL CONDITIONS/DESCRIPTION 3.3V ± 10% MIN. TYP. MAX. UNITS 3 3.3 3.6 V Supply Voltage VDD Ambient Operating Temperature Range TA 0 70 °C Crystal Resonator Frequency fXIN 5 30 MHz Output Load Capacitance CL 20 pF 3 4.26.00 FS6322-04 Three-PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. April 2000 Table 5: DC Electrical Specifications Unless otherwise stated, VDD = 3.3V ± 10%, no load on any output, and ambient temperature range TA = 0°C to 70°C. Parameters denoted with an asterisk ( * ) represent nominal characterization data and are not production tested to any specific limits. Where given, MIN and MAX characterization data are ± 3σ f rom typical. Negative currents indicate current flows out of the device. PARAMETER SYMBOL CONDITIONS/DESCRIPTION MIN. TYP. MAX. UNITS Overall Supply Current, Dynamic, with Loaded Outputs IDD fXTAL = 27MHz; CL = 0pF, VDD = 3.3V FS6322-04: S[2:0]=[100] 20 mA Digital Inputs (OE, S2, S0) High-Level Input Voltage VIH 2.4 VDD+0.3 V Low-Level Input Voltage VIL VSS-0.3 0.8 V High-Level Input Current IIH VIN = VDD Low-Level Input Current (pull-up) IIL VIN = 0V -1 1 µA µA -8 Digital Inputs (S1) High-Level Input Voltage VIH 2.4 VDD+0.3 V Low-Level Input Voltage VIL VSS-0.3 0.8 V High-Level Input Current IIH VIN = VDD Low-Level Input Current (pull-up) IIL VIN = 0V -16 µA As seen by a crystal connected to XIN and XOUT 16 pF RXTAL=20Ω 200 uW -1 1 µA Crystal Oscillator Crystal Loading Capacitance CL(xtal) Crystal Drive Level Clock Outputs (CLKA, CLKB) Output Current High IOH VO = 2.4V -4 mA Output Current Low IOL VO = 0.4V 4 mA Short Circuit Source Current * IOSH VO = 0V; shorted for 30s, max. -25 mA Short Circuit Sink Current * IOSL VO = 3.3V; shorted for 30s, max. 30 mA zOH VO = 0.5VDD; output driving high 70 zOL VO = 0.5VDD; output driving low 55 Ω Output Impedance * 4 4.26.00 FS6322-04 Three-PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. April 2000 Table 6: AC Timing Specifications Unless otherwise stated, VDD = 3.3V ± 10%, no load on any output, and ambient temperature range TA = 0°C to 70°C. Parameters denoted with an asterisk ( * ) represent nominal characterization data and are not production tested to any specific limits. Where given, MIN and MAX characterization data are ± 3σ f rom typical. PARAMETER SYMBOL CONDITIONS/DESCRIPTION CLOCK (MHz) MIN. TYP. MAX. UNITS Clock Output (CLK_X) Duty Cycle * Crystal oscillator derived outputs Measured @1.4V; CL = 20pF 43 51 57 % Duty Cycle * PLL derived outputs Measured @1.4V; CL = 20pF 45 51 55 % Rise Time * tr VO = 0.4V to 2.4V; CL = 20pF 2.2 ns Fall Time * tf VO = 2.4V to 0.4V; CL = 20pF 1.8 ns Jitter, Period (RMS) * tj(1 σ) From rising edge to next rising edge at VDD/2, CL = 20pF 50 ps Jitter, Period (peak-peak) * tj(∆P) From rising edge to next rising edge at VDD/2, CL = 20pF 400 ps Jitter, Cumulative (RMS)* tj(LT) PLL-derived outputs From 0-500µs at VDD/2, CL = 20pF compared to ideal clock source 100 ps PLL derived outputs @ 100KHz offset from fundamental -80 dbC/Hz Phase Noise * 5 4.26.00 FS6322-04 Three-PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. April 2000 4.0 Package Information Table 7: 16-pin SOIC (0.150") Package Dimensions DIMENSIONS INCHES 16 MILLIMETERS MIN. MAX. MIN. MAX. A 0.061 0.068 1.55 1.73 A1 0.004 0.0098 0.102 0.249 A2 0.055 0.061 1.40 1.55 R B 0.013 0.019 0.33 0.49 C 0.0075 0.0098 0.191 0.249 D 0.386 0.393 9.80 9.98 E 0.150 0.157 3.81 3.99 e 0.050 BSC E 1 ALL RADII: 0.005" TO 0.01" B 0.230 0.244 5.84 6.20 h 0.010 0.016 0.25 0.41 L 0.016 0.035 0.41 0.89 Θ 0° 8° 0° 8° h x 45° 7° typ. e 1.27 BSC H H AMERICAN MICROSYSTEMS, INC. A2 D A A1 BASE PLANE C θ L SEATING PLANE Table 8: 16-pin SOIC (0.150") Package Characteristics PARAMETER SYMBOL Thermal Impedance, Junction to Free-Air 16-pin 0.150” SOIC ΘJA Lead Inductance, Self L11 CONDITIONS/DESCRIPTION TYP. UNITS Air flow = 0 m/s 95 °C/W Corner lead 4.0 Center lead 3.0 nH Lead Inductance, Mutual L12 Any lead to any adjacent lead 0.4 nH Lead Capacitance, Bulk C11 Any lead to VSS 0.5 pF 6 4.26.00 FS6322-04 Three-PLL Clock Generator IC AMERICAN MICROSYSTEMS, INC. April 2000 5.0 Ordering Information ORDERING CODE DEVICE NUMBER PACKAGE TYPE OPERATING TEMPERATURE RANGE SHIPPING CONFIGURATION 11825-102 FS6322-04 16-pin (0.150”) SOIC (Small Outline Package) 0° C to 70° C (Commercial) Tape and Reel 11825-112 FS6322-04 16-pin (0.150”) SOIC (Small Outline Package) 0° C to 70° C (Commercial) Tubes Copyright © 2000 American Microsystems, Inc. Devices sold by AMI are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. AMI makes no warranty, express, statutory implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. AMI makes no warranty of merchantability or fitness for any purposes. AMI reserves the right to discontinue production and change specifications and prices at any time and without notice. AMI’s products are intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment, are specifically not recommended without additional processing by AMI for such applications. American Microsystems, Inc., 2300 Buckskin Rd., Pocatello, ID 83201, (208) 233-4690, FAX (208) 234-6796, WWW Address: http://www.amis.com E-mail: [email protected] 7 4.26.00