A Product Line of Diodes Incorporated Green FZT655 150V NPN MEDIUM POWER TRANSISTOR IN SOT223 Features Mechanical Data • • • • • • • • • • • • BVCEO > 150V IC = 1A high Continuous Current Low Saturation Voltage Complementary PNP Type – FZT755 Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability • Case: SOT223 Case material: molded plastic. “Green” molding compound. UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.112 grams (approximate) SOT223 Top View Device Symbol Top View Pin-Out Ordering Information (Note 4) Product FZT655TA Notes: Marking FZT655 Reel size (inches) 7 Tape width (mm) 12 Quantity per reel 1,000 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com. Marking Information FZT 655 FZT655 Document Number DS33151 Rev. 4 - 2 FZT655 = Product type Marking Code 1 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FZT655 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value 150 150 7 1 2 Unit V V V A A Value 2 3 62.5 41.7 19.41 -55 to +150 Unit W W °C/W °C/W °C/W °C Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Leads (Note 7) Operating and Storage Temperature Range Symbol (Note 5) (Note 6) (Note 5) (Note 6) PD RθJA RθJL TJ, TSTG ESD Ratings (Note 8) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Notes: Symbol ESD HBM ESD MM Value 4,000 ≥ 400 Unit V V JEDEC Class 3A C 5. For a device surface mounted on 25mm X 25mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; device measured when operating in steady state condition. 6. Same as note (5), except the device is mounted on 50mm X 50mm single sided 2oz weight copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FZT655 Document Number DS33151 Rev. 4 - 2 2 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FZT655 Thermal Characteristics and Derating Information 50 T amb=25°C 60 25mm x 25mm 2oz FR4 50 40 D=0.5 30 20 Single Pulse D=0.2 D=0.05 10 D=0.1 0 100µ 1m 10m 100m 1 10 100 1k Pulse Width (s) Thermal Resistance (°C/W) Thermal Resistance (°C/W) 70 Single Pulse T amb=25°C 100 50mm x 50mm 2oz FR4 10 25mm x 25mm 2oz FR4 1 100µ 1m 10m 100m 1 10 100 Pulse Width (s) 30 D=0.5 20 Document Number DS33151 Rev. 4 - 2 Single Pulse D=0.2 10 0 100µ D=0.05 D=0.1 1m 10m 100m 1 10 100 1k Pulse Width (s) 1k 3.0 50mm x 50mm 2oz FR4 2.5 25mm x 25mm 2oz FR4 2.0 1.5 1.0 0.5 0.0 0 Pulse Power Dissipation FZT655 50mm x 50mm 2oz FR4 Transient Thermal Impedance Max Power Dissipation (W) Max Power Dissipation (W) Transient Thermal Impedance T amb=25°C 40 20 40 60 80 100 120 140 160 Temperature (°C) Derating Curve 3 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FZT655 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) Emitter-Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current Symbol BVCBO BVCEO BVEBO ICBO IEBO Collector-Emitter Saturation Voltage (Note 9) VCE(sat) Base-Emitter Saturation Voltage (Note 9) Base-Emitter Turn-On Voltage (Note 9) VBE(sat) VBE(on) DC Current Gain (Note 9) Current Gain-Bandwidth Product Output Capacitance (Note 9) Notes: Min 150 150 7 − − − − − − 50 50 20 Typ − − 8.1 <10 <10 120 180 0.85 0.74 85 100 50 Max − − − 100 100 500 500 1.1 1.0 − 300 − Unit V V V nA nA fT 30 − − MHz Cobo − − 20 pF hFE mV V V − Test Condition IC = 100µA IC = 1mA IE = 100µA VCB = 125V VEB = 5.6V IC = 500mA, IB = 50mA IC = 1A, IB = 200mA IC = 500mA, IB = 50mA IC = 500mA, VCE = 5V IC = 10mA, VCE = 5V IC = 500mA, VCE = 5V IC = 1A, VCE = 5V VCE = 20V, IC = 10mA, f = 20MHz VCB = 10V, f = 1MHz 9. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2% FZT655 Document Number DS33151 Rev. 4 - 2 4 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FZT655 Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) FZT655 Document Number DS33151 Rev. 4 - 2 5 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FZT655 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. SOT223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e — — 4.60 e1 — — 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm A A1 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 Y1 C1 Y2 Dimensions X1 X2 Y1 Y2 C1 C2 Value (in mm) 3.3 1.2 1.6 1.6 6.4 2.3 C2 X2 FZT655 Document Number DS33151 Rev. 4 - 2 6 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FZT655 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com FZT655 Document Number DS33151 Rev. 4 - 2 7 of 7 www.diodes.com December 2012 © Diodes Incorporated