OMRON G3NE

Solid-state Relay
G3NE
Compact, Low-cost, SSR Switching 5 to 20 A
• Wide load voltage range: 75 to 264 VAC. Both 100-V and 200V loads can be handled with the same model.
• Dedicated, compact aluminum PCB and power elements used.
• Built-in varistor effectively absorbs external surges.
• Quick-connect #110 input terminals and #250 output connections.
• UL, CSA, and IEC/EN (TÜV) approval obtained for “-US” models.
Ordering Information
■ List of Models
Isolation
Zero cross
function
Phototriac
Yes
Indicator
No
Rated output load
5 A at 100 to 240 VAC
Rated input voltage
5, 12, 24 VDC
G3NE-205T
G3NE-205T-US
G3NE-205T-2-US
G3NE-210T
G3NE-210T-US
G3NE-210T-2-US
G3NE-220T
G3NE-220T-US
G3NE-220T-2-US
G3NE-205TL
G3NE-205TL-US
G3NE-205TL-2-US
G3NE-210TL
G3NE-210TL-US
G3NE-210TL-2-US
G3NE-220TL
G3NE-220TL-US
G3NE-220TL-2-US
10 A at 100 to 240 VAC
20 A at 100 to 240 VAC
No
Model
5 A at 100 to 240 VAC
10 A at 100 to 240 VAC
20 A at 100 to 240 VAC
Note: When ordering, specify the input voltage.
■ Accessories (Order Separately)
Heat Sinks
Model
SSR
The following heat sinks are thin and can be DIN-track mounted.
See Dimensions for details.
Applicable SSR
Y92B-N50
G3NE-205T(L)(-2)(-US)/-210T(L)(-2)(-US)
Y92B-N100
G3NE-220T(L)(-2)(-US)
Specifications
■ Ratings
Input
Rated voltage
Operating voltage
Voltage level
Must operate
Must release
Input impedance
With zero cross function Without zero cross function
5 VDC
4 to 6 VDC
4 VDC max.
250 Ω±20%
300 Ω±20%
12 VDC
9.6 to 14.4 VDC
9.6 VDC max.
600 Ω±20%
800 Ω±20%
24 VDC
19.2 to 28.8 VDC
19.2 VDC max.
1.6 kΩ±20%
1 VDC min.
Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions.
Solid-state Relay
G3NE
J-17
Output
Model
Applicable load
Rated load voltage Load voltage range
Load current
(See note 1.)
With heat sink
75 to 264 VAC
Without heat sink
0.1 to 5 A
0.1 to 5 A
60 A (60 Hz, 1 cycle)
G3NE-210T(L)-(-2)(US)
0.1 to 10 A
(See note 2.)
0.1 to 5 A
150 A (60 Hz, 1 cycle)
G3NE-220T(L)-(-2)(US)
0.1 to 20 A
(See note 2.)
0.1 to 5 A
220 A (60 Hz, 1 cycle)
G3NE-205T(L)-(-2)(US)
100 to 240 VAC
Inrush current
Note: 1. The load current varies depending on the ambient temperature. Refer to Load Current vs. Ambient Temperature under Engineering Data
for details.
2. These values apply when using a dedicated radiator or a radiation plate of specified size.
■ Characteristics
Item
G3NE-2@@T-(-2)(US)
Operate time
1/2 of load power source cycle + 1 ms max.
Release time
1/2 of load power source cycle + 1 ms max.
Output ON voltage drop
1.6 V (RMS) max.
Leakage current
2 mA max. (at 100 VAC)
5 mA max. (at 200 VAC)
G3NE-2@@TL-(-2)(US)
1 ms max.
Insulation resistance
100 MΩ min. (at 500 VDC)
Dielectric strength
2,000 VAC, 50/60 Hz for 1 min
Vibration resistance
Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance
Destruction: 1,000 m/s2
Ambient temperature
Operating: –30°C to 80°C (with no icing or condensation)
Storage: –30°C to 100°C (with no icing or condensation)
Ambient humidity
Operating: 45% to 85%
Approved standards
(only for -US models)
UL508 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535
TÜV R9051064 (VDE0435) (EN60950)
Weight
Approx. 37 g
Engineering Data
Load Current vs. Ambient Temperature
G3NE-210T(L)-(-2)(US)
Load current (A)
Load current (A)
J-18
Solid-state Relay G3NE
With standard heat sink (Y92B-N100) or
aluminum plate measuring 300 mm x
300 mm x t3 mm (W x H x D)
With standard heat sink (Y92B-N50)
or aluminum plate measuring 100 mm
x 100 mm x t2 mm (W x H x D)
Without heat sink
Ambient temperature (°C)
G3NE-220T(L)-(-2)(US)
Without heat sink
Ambient temperature (°C)
Load current (A)
G3NE-205T(L)-(-2)(US)
Without heat sink
Ambient temperature (°C)
Inrush Current Resistivity: Non-repetitive
Note: Keep the inrush current to half the rated value if it occurs repetitively.
Inrush current (A. Peak)
G3NE-220T(L)-(-2)(US)
Inrush current (A. Peak)
G3NE-210T(L)-(-2)(US)
Inrush current (A. Peak)
G3NE-205T(L)-(-2)(US)
Energizing time (ms)
Energizing time (ms)
Energizing time (ms)
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G3NE-205T(L)/210T(L)/220T(L)-(-2)(US)
3.5 dia. hole
Terminal Arrangement/
Internal Connections
(Top View)
47.5
max.
37.5 max.
14.5
Input
voltage
Two #110 (t = 0.5) (Faston
tab or equivalent)*
6.5
Two #250 (t = 0.8) (Faston
tab or equivalent)
Input
4−
Output
Load
2
Load power
supply
7.95
7.1
2.9
6
11.5 max.
3
Mounting Holes
Two, 3.5-dia. or M3 holes
* G3NE-2@@T(L)-2-US: Two, #187 (t=0.5) (Faston tab or equivalent)
30±0.2
Mounting Holes
4.6 dia. hole
Two, M3 holes
Two, M4 holes
Two, 3.2-dia.
holes
44 max. 30
35 30.5±0.3
47.6
5.6
5
77 max.
90±0.3
100 max.
Y92B-N100
4.6 dia. hole
Two, M3 holes
47 max.
6
4.5
51 max.
Weight: approx. 200 g
35±0.2
Two, M4
holes
Two, 3.2-dia. holes
Mounting Holes
71 max. 30
35 30.5±0.3
90±0.4
Two, 4.4-dia.
or M4 holes
SSR
Heat Sink
Y92B-N50
1
3+
30+0.5
75 max.
90±0.4
47.6
77 max.
5
5.6
28
100 max.
13
4.5
Two, 4.4-dia.
or M4 holes
90±0.3
100 max.
35±0.2
Weight: approx. 400 g
Solid-state Relay
G3NE
J-19
Precautions
Refer to the Technical Information for SSRs (Cat. No. J137) for general precautions.
■ Correct Use
Do not apply excessive force to the terminals. Exercise care when
pulling or inserting the terminal clips for the Quick Connector (QC).
When attaching a heat sink to the G3NE, in order to facilitate heat
dissipation, apply heat conductive grease on the heat sink. Tighten
the mounting screws of the heat sink with a torque of 0.59 to 0.98
N·m.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K062-E1-03
J-20
In the interest of product improvement, specifications are subject to change without notice.
Solid-state Relay G3NE