Solid State Relay G3NA A Wide Range of Models with 5- to 40-A Output Currents and Up to 480-VAC/200-VDC Output Voltages ■ ■ ■ ■ ■ ■ All models feature the same compact dimensions to provide a uniform mounting pitch Built-in MOV effectively absorbs external surges Operation indicator (red LED) enables monitoring operation Protective cover for greater safety Standard models approved by UL/CSA AC and DC input versions available Ordering Information To Order: Select the part number and add the desired rated input voltage, (e.g., G3NA-240B-100 to 120 VAC). Isolation Phototriac Photocoupler Zero cross function Yes Indicator Yes Rated output load (Applicable output load) 5 A at 24 to 240 VAC* (19 to 264 VAC) 10 A at 24 to 240 VAC* (19 to 264 VAC) Photocoupler Yes Yes — Phototriac Yes Photocoupler Yes Yes Photocoupler Yes Yes Phototriac Yes Yes Photocoupler Yes Yes 10 A at 200 to 480 VAC* (180 to 528 VAC) 10 A at 5 to 200 VDC* (4 to 220 VDC) 20 A at 24 to 240 VAC* (19 to 264 VAC) 20 A at 200 to 480 VAC* (180 to 528 VAC) 25 A at 24 to 240 VAC* (19 to 264 VAC) 25 A at 200 to 480 VAC* (180 to 528 VAC) 40 A at 24 to 240 VAC* (19 to 264 VAC) 40 A at 200 to 480 VAC* (180 to 528 VAC) Rated input voltage Part number 5 to 24 VDC 100 to 120 VAC 200 to 240 VAC 5 to 24 VDC 100 to 120 VAC 200 to 240 VAC 5 to 24 VDC 100 to 240 VAC 5 to 24 VDC 100 to 240 VAC 5 to 24 VDC 100 to 120 VAC 200 to 240 VAC 5 to 24 VDC 100 to 240 VAC 5 to 24 VDC 100 to 120 VAC 200 to 240 VAC 5 to 24 VDC 100 to 240 VAC 5 to 24 VDC 100 to 120 VAC 200 to 240 VAC 5 to 24 VDC 100 to 240 VAC G3NA-205B * Loss time increases under 75 VAC. NOTE: When ordering a TÜV-approved model, add “-UTU” to the model number as shown below: Example: G3NA-210B-UTU G3NA-210B G3NA-410B G3NA-D210B G3NA-220B G3NA-420B G3NA-225B G3NA-425B G3NA-240B G3NA-440B G3NA G3NA ■ ACCESSORIES Heat Sinks Types Standard mount Track mount Applicable solid-state relays G3NA-205B, G3NA-210B, G3NA-D210B, G3NA-220B, G3NA-410B, G3NA-420B G3NA-225B, G3NA-240B, G3NA-425B, G3NA-440B G3NA-440B G3NA-205B, G3NA-210B, G3NA-D210B, G3NA-410B G3NA-220B, G3NA-420B G3NA-225B, G3NA-240B, G3NA-425B, G3NA-440B Part number Y92B-A100 Y92B-A150N Y92B-A250 Y92B-N50 Y92B-N100 Y92B-N150 Mounting Track and Accessories Description Mounting bracket for G3NA-240B. Changes pitch to 56 mm (2.21 in.) from 47.5 mm (1.73 in.), the same pitch as G3N-240B. DIN Rail Track, 50 cm (1.64 feet) length; use with Y92B-N■ ■ ■ ■ heat sinks DIN Rail Track, 1 m (3.28 feet) length; use with Y92B-N■ ■ ■ ■ heat sinks Spacer End cap Part number R99-11 PFP-50M PFP-100M PFP-S PFP-M Specifications ■ INPUT RATINGS (Ambient temperature: 25°C [77°F]) Type G3NA-2■ ■ ■B ■ G3NA-4■ ■ ■B ■ G3NA-D210B Rated voltage Operating voltage range Impedance 5 to 24 VDC 100 to 120 VAC 200 to 240 VAC 5 to 24 VDC 100 to 240 VAC 5 to 24 VDC 100 to 240 VAC 4 to 32 VDC 75 to 132 VAC 150 to 264 VAC 4 to 32 VDC 75 to 132 VAC 4 to 32 VDC 75 to 132 VAC 7 mA max. (see note 2) 36 kΩ ±20% 72 kΩ ±20% 5 mA max. (see note 2) 72 kΩ ±20% 5 mA max. (see note 2) 72 kΩ ±20% Voltage Level Must operate voltage 4 VDC max. 75 VAC, max. (see note 3) 150 VAC max. (see note 3) 4 VDC max. 75 VAC max. 4 VDC max. 75 VAC max. Must release voltage 1 VDC min. 20 VAC min. (see note 3) 40 VAC min. (see note 3) 1 VDC min. 20 VAC min. 1 VDC min. 20 VAC min. Note: 1. The input impedance is measured at the maximum value of the rated supply voltage (for example, with the model rated at 100 to 120 VAC, the input impedance is measured at 120 VAC). 2. With constant current input circuit system. 3. Refer to the "Characteristic Data" for further details. ■ OUTPUT RATINGS Type Applicable load Rated load voltage Load voltage range G3NA-205B G3NA-210B G3NA-410B G3NA-220B G3NA-420B G3NA-225B G3NA-425B G3NA-240B G3NA-440B G3NA-D210B 24 to 240 VAC 24 to 240 VAC 200 to 480 VAC 24 to 240 VAC 200 to 480 VAC 24 to 240 VAC 200 to 480 VAC 24 to 240 VAC 200 to 480 VAC 5 to 200 VDC 19 to 264 VAC 19 to 264 VAC 180 to 528 VAC 19 to 264 VAC 180 to 528 VAC 19 to 264 VAC 180 to 528 VAC 19 to 264 VAC 180 to 528 VAC 4 to 220 VDC *When the appropriate size OMRON heat sink is used. 2 Load current With heat sink* 0.1 to 5 A 0.1 to 10 A 0.2 to 10 A 0.1 to 20 A 0.2 to 20 A 0.1 to 25 A 0.1 to 25 A 0.1 to 40 A 0.2 to 40 A 0.1 to 10 A Without heat sink 0.1 to 3 A 0.1 to 4 A 0.2 to 4 A 0.1 to 4 A 0.2 to 4 A 0.1 to 4 A 0.1 to 4 A 0.1 to 6 A 0.2 to 6 A 0.1 to 4 A Surge current 60 A (60 Hz, 1 cycle) 150 A (60 Hz, 1 cycle) 150 A (60 Hz, 1 cycle) 220 A (60 Hz, 1 cycle) 220 A (60 Hz, 1 cycle) 220 A (60 Hz, 1 cycle) 220 A (60 Hz, 1 cycle) 440 A (60 Hz, 1 cycle) 440 A (60 Hz, 1 cycle) 20 A (10 ms) G3NA G3NA ■ CHARACTERISTICS Type Operate time Release time DC input AC input DC input AC input Output ON voltage drop Leakage current Insulation resistance Dielectric strength Vibration Shock Ambient temperature Malfunction Malfunction Operating Storage Humidity Weight G3NA-205B, -210B, -220B, -225B G3NA-240B 1/2 of load power source cycle + 1 ms max. 1 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 1 1/2 of load power source cycle + 1 ms max. 1.6 V (RMS) max. 1.6 V (RMS) max. 5 mA max. at 100 VAC 10 mA max. at 200 VAC 100 MΩ min at 500 VDC 2,500 VAC, 50/60 Hz for 1 minute 10 to 55 Hz, 1.5 mm double amplitude 1,000 m/s2 (approx. 100G) -30° to 80°C (-22° to 176°F) with no icing -30° to 100°C (-22° to 212°F) with no icing 45% to 85% RH Approx. 60 g (2.1 oz.) Approx. 70 g (2.5 oz.) G3NA-410B, -420B, -425B, -440B G3NA-D210B 1 ms max. 30 ms max. 5 ms max. 30 ms max. 1.8 V (RMS max.) 1.5 V max. 10 mA max. 5 mA max. at 200 VAC at 200 VDC 20 mA max. at 400 VAC Approx. 80 g (2.8 oz.) Approx. 70 g (2.5 oz.) Note: Data shown are of initial value. ■ CHARACTERISTIC DATA Load Current vs. Ambient Temperature Characteristics G3NA-210B G3NA-410B G3NA-220B G3NA-420B Ambient temperature (°C) G3NA-225B G3NA-425B Load current (A) Load current (A) Load current (A) G3NA-205B Ambient temperature (°C) G3NA-440B Ambient temperature (°C) Load current (A) Load current (A) Load current (A) G3NA-240B Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) 3 G3NA G3NA ■ CHARACTERISTIC DATA (continued) Load Current vs. Ambient Temperature Characteristics Load current (A) G3NA-D210B Ambient temperature (°C) Surge Current Resistivity G3NA-210B G3NA-410B Energizing time (ms) G3NA-240B G3NA-440B Inrush current (A), peak Energizing time (ms) Inrush current (A), peak Inrush current (A), peak G3NA-D210B Energizing time (ms) 4 G3NA-220B, G3NA-225B, G3NA-420B, G3NA-425B Inrush current (A), peak Inrush current (A), peak G3NA-205B Energizing time (ms) Energizing time (ms) G3NA G3NA Heat sink size (cm2) Heat Sink Size vs. Load Current G3NA-220B Load current (A) Note: The heat sink size refers to the combined area of the sides of the heat sink that radiate heat. For example, when a current of 18 A is allowed to flow through the SSR at 40°C, the graph shows that the heat sink size is about 450 cm2. Therefore, if the heat sink is square, one side of the heat sink must be 15 cm (152 x 2 = 450) or longer. Dimensions In the case of surface mounting, a 30% derating of load current is required. Unit: mm (inch) ■ SOLID-STATE RELAYS G3NA-205B, G3NA-210B, G3NA-220B, G3NA-225B, G3NA-410B, G3NA-420B, G3NA-425B 4.5 (0.18) dia. 58 (2.28) max. Terminal arrangement/ Internal connections (Top view) Four M4 x 10 (0.39) 44 (1.73) Two, 4.4 (0.17) dia. or M4 Load 47.5 (1.87) Mounting holes (Bottom view) Load power supply Load Operation indicator 4.5 (0.18) 13.8 (0.54) 25 (0.98) 1 2 (-) 4 (+) 3 Input 47.6 ± 0.2 (1.87 ± 0.01) 25 (0.98) max. 43 (1.69) max. 27 (1.06) max. G3NA-240B, G3NA-440B 4.5 (0.18) dia. Terminal arrangement/ Internal connections (Top view) Two, M5 x 12 (0.47) Mounting holes (Bottom view) Two, 4.4 (0.17) dia. or M4 58 (2.28) min. Load Load power supply 44 (1.73) 47.5 (1.87) Load 1 Operation indicator 4.5 (0.18) 25 (0.98) 43 (1.69) max. Two, M4 x 10 (0.39) 13.8 (0.54) 2 (-) 4 Input 47.6 ± 0.2 (1.87 ± 0.01) (+) 3 25 (0.98) max. 27 (1.06) max. 5 G3NA G3NA Unit: mm (inch) ■ SOLID-STATE RELAYS (continued) G3NA-D210B 4.5 (0.18) dia. Terminal arrangement/ Internal connections (Top view) Four, M4 x 10 (0.39) Load 58 (2.28) max. 44 (1.73) 47.5 (1.87) Mounting holes (Bottom view) Two, 4.4 (0.17) dia. or M4 Load power supply Load Operation indicator 1 - 2 + (-) 4 (+) 3 Input 4.5 (0.18) 13.8 (0.54) 25 (0.98) 25 (0.98) max. 43 (1.69) max. 27 (1.06) max. 47.6 ± 0.2 (1.87 ± 0.01) ■ HEAT SINKS Track Mount Heat Sink – Y92B-N50 Two, M3 holes Two, M4 holes 4.6 (0.18) dia. 47 (1.85) max. 44 30 (1.73) max. (1.18) 35 (1.38) 30.5 ± 0.3 (1.20 ± 0.01) 47.6 (1.87) Mounting holes (Top view) Two, 3.2 (0.13) dia. holes 5.6 (0.22) 5 (0.20) 77 (3.03) max. Two, 4.4 (0.17) dia. or M4 holes 4.5 (0.18) 6 (0.24) 35 ± 0.2 (1.38 ± 0.01) 90 ± 0.4 (3.54 ± 0.02) 51 (2.01) max. 90 ± 0.3 (3.54 ± 0.01) Weight: approx. 200 g (7 oz.) 100 (3.94) max. Track Mount Heat Sink – Y92B-N100 4.6 (0.18) dia. Two, M3 holes Two, M4 holes 71 (2.80) max. 30 (1.18) 35 (1.38) Mounting holes (Top view) Two, 3.2 (0.13) dia. holes 35 ± 0.2 (1.38 ± 0.01) 30.5 ± 0.3 (1.20 ± 0.01) 47.6 (1.87) 77 (3.03) max. 90 ± 0.3 (3.54 ± 0.01) 100 (3.94) max. 6 Two, 4.4 (0.17) dia. or M4 holes 74 (2.91) max. 5.6 (0.22) 28 (1.10) 5 (0.20) 4.5 (0.18) 13 (0.51) 90 ± 0.4 (3.54 ± 0.02) 100 (3.94) max. Weight: approx. 400 g (14 oz.) G3NA G3NA Track Mount Heat Sink – Y92B-N150 47.6 (1.87) Mounting holes (Top view) Two, 3.2 (0.13) dia. holes Two, M4 holes 4.6 (0.18) dia. 100 (3.94) max. 35 (1.38) 30 (1.18) 56 ± 0.3 (2.21 ± 0.01) 28 (1.10) 5.6 (0.22) 77 (3.03) max. Two, 4.4 (0.17) dia. or M4 holes 104 (4.09) max. 35 ± 0.2 (1.38 ± 0.01) 90 ± 0.4 (3.54 ± 0.02) 5 (0.20) 13 (0.51) 4.5 (0.18) 100 (3.94) max. Weight: approx. 560 g (20 oz.) 90 ± 0.3 (3.54 ± 0.01) 100 (3.94) max. Standard Mount Heat Sinks Y92B-A100 Y92B-A150 Mounting holes Y92B-A100, Y92B-A150N Y92B-A250 Three, M4 holes Two, M4 holes 90 ± 0.1 (3.54 ± 0.004) 90 ± 0.1 (3.54 ± 0.004) Four, 4.4 (0.17) dia. or M4 holes 80.5 (3.17) max. R2.2 (0.09) 1.5 (0.06) 100.5 (3.94) max. 47.6 (1.87) 90 ± 0.1 (3.54 ± 0.004) 9.6 (0.38) 2 (0.08) 47.6 (1.87) 50 ± 0.1 (1.97 ± 0.004) 50 ± 0.1 (1.97 ± 0.004) 56 ± 0.5 (2.21 ± 0.02) 100 (3.93) max. 1.5 (0.06) 30 (1.18) 50 ± 0.1 (1.97 ± 0.004) 45.5 (1.79) max. 150 (5.91) max. Standard Mount Heat Sinks Y92B-A250 Mounting holes Three, M4 holes 90 ± 0.1 (3.54 ± 0.004) Four, 4.4 (0.17) dia. or M4 holes 80.5 (3.17) max. R2.2 (0.09) 1.5 (0.06) 47.6 (1.87) 100.5 (3.94) max. 90 ± 0.1 (3.54 ± 0.004) 9.6 (0.38) 2 (0.08) 1.5 (0.06) 50 ± 0.1 (1.97 ± 0.004) 56 ± 0.5 (2.21 ± 0.02) 250 (9.84) max. 50 ± 0.1 (1.97 ± 0.004) 30 (1.18) 45.5 (1.79) max. R99-11 Mounting Bracket for G3NA-240B 16 (0.63) 12.5 (0.49) 8 (0.32) 5 (0.20) 21 (0.83) 4 (0.16) 4.6 (0.18) 56 (2.21) Note: Use mounting bracket R99-11 to mount the G3NA-240B with a pitch of 56 mm (2.21 in) instead of 47.5 mm (1.87 in) to match the pitch of G3N-240B. 7 G3NA G3NA ■ APPROVALS UL (File No. E64562)/CSA (File No. LR35535) SSR type G3NA-205B G3NA-210B Input voltage 5 to 24 VDC 100 to 120 VAC 200 to 240 VAC G3NA-220B G3NA-225B G3NA-240B G3NA-410B 5 to 24 VDC 100 to 240 VAC G3NA-420B G3NA-425B G3NA-440B G3NA-D210B Load type General use/Tungsten Motor General use/Tungsten Motor General use/Tungsten Motor General use/Tungsten Motor General use/Tungsten Motor General use/Tungsten Motor Contact ratings Without heat sink 3 A, 240 VAC 2.5 FLA, 15 LRA, 240 VAC 4 A, 240 VAC 2.5 FLA, 15 LRA, 240 VAC 4 A, 240 VAC 2.5 FLA, 15 LRA, 240 VAC 4 A, 240 VAC 2.5 FLA, 15 LRA, 240 VAC 6 A, 240 VAC 5 FLA, 30 LRA, 240 VAC 4 A, 480 VAC 2.5 FLA, 15 LRA, 480 VAC With heat sink (see note 1) 5 A, 240 VAC 2.5 FLA, 15 LRA, 240 VAC 10 A, 240 VAC 5 FLA, 30 LRA, 240 VAC 20 A, 240 VAC 10 FLA, 60 LRA, 240 VAC 25 A, 240 VAC 12 FLA, 72 LRA, 240 VAC 40 A, 240 VAC 20 FLA, 120 LRA, 240 VAC 10 A, 480 VAC 5 FLA, 30 LRA, 480 VAC General use/Tungsten Motor General use/Tungsten Motor General use/Tungsten Motor General use 4 A, 480 VAC 2.5 FLA, 15 LRA, 480 VAC 4 A, 480 VAC 2.5 FLA, 15 LRA, 480 VAC 6 A, 480 VAC 5 FLA, 30 LRA, 480 VAC 4 A, 200 VDC 20 A, 480 VAC 10 FLA, 60 LRA, 480 VAC 25 A, 480 VAC 12 FLA, 72 LRA, 480 VAC 40 A, 480 VAC 20 FLA, 120 LRA, 480 VAC 10 A, 200 VDC Note: 1. When used with the proper OMRON heat sink part number or an appropriately dimensioned equivalent. 2. The rated values approved by each of the safety standards (e.g., UL, CSA, and TUV) may be different from the performance characteristics individually defined in this catalog. 3. In the interest of product improvement, specifications are subject to change. Precautions See General Information Section near the front of this catalog for Solid State Precautions. NOTE: DIMENSIONS ARE SHOWN IN MILLIMETERS. To convert millimeters to inches divide by 25.4. OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON 416-286-6465 Cat. No. GC RLY7 8 01/00 Specifications subject to change without notice. Printed in the U.S.A.