PCB Relay
G6DS
Slim, Miniature Relay with 1-pole 5-A
Switching Capability
• Slim 5-mm width and miniature size.(20.3 x 5.08 x 12.5 mm max.)
• Ideal for high-density mounting.
• Delivers high switching performance (5 A at 250 VAC/30 VDC) and
enables various loads all in a slim, miniature size.
• Highly sensitive coil type (120 mW) also available.
• Satisfies EN 61131-2 (PLC) and EN 61010 (measuring instrument/
control equipment) reinforced insulation requirement.
• P6DS-04P Socket allows for easy installation and removal of Relays.
• RoHS compliant.
Model Number Structure
■ Model Number Legend
G6DS -
1
2
DC
3
4
4. Rated Coil Voltage
5, 12, 24
1. Number of Poles
1:
1 pole
2. Contact Form
A:
SPST-NO
3. Classification
None: Standard
H:
High-sensitivity
Applications
Applications include: PLCs, I/O modules, I/O ports, Timers, Temperature Controllers, and Control Boards.
Ordering Information
Classification
Standard
Contact form
SPST-NO
High-sensitivity
Enclosure ratings
Fully sealed
Model
G6DS-1A
G6DS-1A-H
Note: When ordering, add the rated coil voltage to the model number.
Example: G6DS-1A DC12
Rated coil voltage
■ Accessories (Order Separately)
Connecting Socket
P6DS-04P
Relay Pullout Tool
R99-01 for G6DS
PCB Relay
G6DS
131
■ Coil Ratings
Item
Standard
High-sensitivity
Rated voltage
5 VDC
12 VDC
24 VDC
5 VDC
12 VDC
Rated current
36 mA
15 mA
7.5 mA
24 mA
10 mA
24 VDC
5 mA
Coil resistance
139 Ω
800 Ω
3,200 Ω
208 Ω
1,200 Ω
4,800 Ω
Must operate voltage
70% max. of rated voltage
Must release voltage
5% min. of rated voltage
Max. voltage
160% of rated voltage (at 23°C)
Power consumption
Approx. 180 mW
Approx. 120 mW
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. “Max. voltage” refers to voltage that can be applied to the relay coil momentarily. Do not apply "Max. voltage" continuously.
■ Contact Ratings
Resistive load (cos φ=1)
Item
Rated load
5 A at 250 VAC, 5 A at 30 VDC
Rated carry current
5A
Max. switching voltage
250 VAC, 30 VDC
Max. switching current
5A
Max. switching power
1,250 VA, 150 W
Failure rate (reference value) (See note.)
Note: P level: λ60 = 0.1 × 10
−6
Inductive load (cos φ=0.4, L/R=7 ms)
2 A at 250 VAC, 2 A at 30 VDC
5 mA at 24 VDC
operation
■ Characteristics
Contact resistance (See note 1.)
100 mΩ max.
Operate time
10 ms max.
Release time
5 ms max.
Insulation resistance (See note 2.)
1,000 MΩ min. (at 500 VDC)
Dielectric strength
3,000 VAC, 50/60 Hz for 1 min. between coil and contacts
750 VAC, 50/60 Hz for 1 min. between contacts of same polarity
Impulse withstand voltage
6,000 V (1.2 × 50 μs) between coil and contacts
Vibration resistance
Destruction
10 to 55 to 10 Hz, 1.5-mm double amplitude
Malfunction
10 to 55 to 10 Hz, 1.5-mm double amplitude
Shock resistance
Destruction
1,000 m/s2
Malfunction
150 m/s2 (standard type); 130 m/s2 (high-sensitivity type)
Mechanical
20,000,000 operations min. (at 18,000 operations/hr)
Electrical
100,000 operations min. for standard type; 80,000 operations min. for high sensitivity type (1,800
operations/hr @ 23°C)
Endurance
Ambient temperature
Operating: −40°C to 85°C (with no icing or condensation)
Ambient humidity
Operating: 5% to 85%
Weight
Approx. 2.3 g
Note: 1. The data shown above are initial values.
2. The contact resistance is derived using voltage drop method with 1 A applied at 5 VDC.
3. The insulation resistance is possible between coil and contacts and between contacts of the same polarity at 500 VDC.
132
PCB Relay
G6DS
30
10
AC resistive load
5
3
DC resistive
load
1
AC inductive
load
cosφ=0.4
DC inductive
load
0.5
Ambient Temperature vs.
Maximum Coil Voltage
Maximum coil voltage (%)
Switching current (A)
Maximum Switching Power
50
Endurance
Endurance (x104 operations)
Engineering Data
100
250-VAC/30-VDC resistive load
50
Standard type
30
High-sensitivity type
10
180
160
140
120
(cosφ=0.4/ L/R=7 ms)
3
3
5
10
30
100
0
250 500 1,000
80
1
2
3
4
Ambient Temperature vs.
Operating/Recovery Voltage
G6DS-1A
Energized
Not energized
max.
X
min.
60
7
8
9
60
0
10
23 30
40
50
60
70
80 85 90
Ambient temperature (°C)
Note: The maximum coil voltage is the maximum
voltage that can be applied to the relay coil.
Y
1000
800
ave.
70
6
Malfunctioning Shock
G6DS-1A
90
80
5
Switching current (A)
Switching voltage (V)
Ratio of rated voltage (%)
200
100
5 250-VAC/30 VDC inductive load
0.3
0.1
0
500
300
600
Z
400
200
50
0
40
30
Z'
20
0
−60
−40
−20
0
20
40
60
80
Shock direction
X
X'
Y
Z
Z'
max.
ave.
min.
10
X'
Y'
Y'
Units: m/s2
Coil terminals
Measurement conditions: Impose a shock in the ±X, ±Y, and
±Z directions three times each with the Relay energized to
check the shock values that cause the Relay to malfunction.
100
Ambient temperature (°C)
■ Approved Standards
• The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this catalog.
UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 95°C
Model
G6DS-1A
Contact form
SPST-NO
Coil ratings
Contact ratings
5 to 24 VDC
5 A at 250 VAC (Resistive)
Number of test operations
100,000
5 A at 30 VDC (Resistive)
G6DS-1A-H
5 A at 250 VAC (Resistive)
80,000
5 A at 30 VDC (Resistive)
VDE (EN61810-1) (License No. B161)
Model
G6DS-1A
G6DS-1A-H
Contact form
SPST-NO
Coil ratings
5, 12, 24 VDC
Contact ratings
5 A, 250 VAC (cosφ=1.0)
5 A, 30 VDC (0 ms)
5 A, 250 VAC (cosφ=1.0)
5 A, 30 VDC (0 ms)
PCB Relay
G6DS
133
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Terminal Arrangement/
Internal Connections
(Bottom View)
G6DS-1A/1A-H
21.3 max.
5.08 max.
20
Mounting Holes
(Bottom View)
5.08±0.1
10.16±0.1
0.3
Connecting Socket
0.3
ur,
Fo dia.
1.1
2.54±0.1
0.8
(1.11)
(1.2)
0.3
3.3
0.3
12.5 max.
(1.11)
(1.26)
2.54±0.1
0.6
22.5 max.
5.55 max.
P6DS-04P
Mounting Holes
(Bottom View)
17.78±0.05
2.54±0.05
14.8 max.
0
6.1 −0.1
2.54±0.05
(2.31)
(1.46)
12.7±0.05
2.54
10.16
3.65
(2.31)
0.6
0.3
(1.4)
Four, 1.1 dia.
5.08
Relay Pullout Tool
R99-01 for G6DS
The R99-01 for G6DS is a convenient tool to remove a G6DS Relay from a P6DS-04 Socket when sockets are mounted very closely together.
Packing
■ Stick packing
1 stick = 25 Relays
1 packing case = 20 sticks (500 Relays)
1 carton box = 6 packing cases (3,000 Relays)
134
PCB Relay
G6DS
Precautions
More than two relays can be closely mounted right side up as shown
in the following illustration. (This applies to the P6DS as well.)
Socket Mounting Height
5.08 mm
18.5 mm max.
Current flow:
5 A max.
More than two relays can be closely mounted upside down as shown
in the following illustration.
7.62 mm in the
upside-down
direction
When mounting the relay, insert it into the socket as vertically as possible so that the relay terminals contact securely with the contact pins
on the socket.
The P6DS is flux-resistive. Do not wash the P6DS with water.
Remove the relay from the socket before soldering the socket to a
PCB.
Disclaimer:
Current flow:
2 A max.
2.54 mm
Note: The space between relays required for heat radiation may vary
with operating conditions. Contact your OMRON representative
for details.
All technical performance data applies to the product as such; specific conditions of individual applications are not considered. Always
check the suitability of the product for your intended purpose.
OMRON does not assume any responsibility or liability for noncompliance herein, and we recommend prior technical clarification for
applications where requirements, loading, or ambient conditions differ from those applying to general electric applications. Any responsibility for the application of the product remains with the customer
alone. THIS COMPONENT CAN NOT BE USED FOR AUTOMOTIVE APPLICATIONS.
PCB Relay
G6DS
135
MEMO
136
PCB Relay
G6DS
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
PCB Relay
G6DS
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. X301-E-1
PCB Relay
06/09
G6DS
Specifications subject to change without notice
Printed in USA