195D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated FEATURES • 8 mm, 12 mm tape packaging to EIA-481-1 reeling per IEC 286-3. 7’ (178 mm) standard 13" (330 mm) available Pb-free Available RoHS* • US and European case sizes available COMPLIANT PERFORMANCE CHARACTERISTICS Capacitance Range: 0.1 µF to 330 µF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 2 WVDC to 50 WVDC Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Note: Refer to Doc 40088 ORDERING INFORMATION 195D TYPE 106 CAPACITANCE X0 CAPACITANCE TOLERANCE 004 DC VOLTAGE RATING AT + 85 °C S CASE CODE 2 TERMINATION T PACKAGING T = Tape and Reel Style 2 is 7" [178 mm] Reel standard standard 2 = 100 % Tin 1/2" Reel minimum 4 = Gold Plated 13" [330] Reel 8 = Solder available excluding Plated (60/40) the “R” case, on Special Order request. See Tape and Reel Note: Preferred Tolerance and reel sizes are in bold. Specifications. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % X5 = ± 5 % (Special Order) This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes Table DIMENSIONS in inches [millimeters] Tantalum Wire Nib Identifies Anode (+) Terminal W L MAX. B D REF. J MAX. J MAX. A H CASE CODE EIA SIZE C N/A R 7257 S 3518 V 3527 X 7227 Y 7227 Z 7227 L (MAX.) W H A B D (REF.) J (MAX.) 0.087 [2.21] 0.283 [7.2] 0.143 [3.63] 0.143 [3.63] 0.285 [7.24] 0.285 [7.24] 0.285 [7.24] 0.045 ± 0.010 [1.14 ± 0.25] 0.045 ± 0.010 [1.14 ± 0.25] 0.136 ± 0.012 [3.5 ± 0.3] 0.048 ± 0.008 [1.22 ± 0.20] 0.051 ± 0.010 [1.30 ± 0.25] 0.051 ± 0.010 [1.30 ± 0.25] 0.069 ± 0.010 [1.75 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] 0.016 ± 0.008 [0.40 ± 0.20] 0.051 ± 0.012 [1.3 ± 0.3] 0.023 ± 0.010 [0.58 ± 0.25] 0.023 ± 0.010 [0.58 ± 0.25] 0.040 ± 0.020 [1.00 ± 0.50] 0.040 ± 0.020 [1.00 ± 0.50] 0.040 ± 0.020 [1.00 ± 0.50] 0.042 ± 0.010 [1.07 ± 0.25] 0.180 ± 0.025 [4.6 ± 0.6] 0.085 ± 0.015 [2.16 ± 0.37] 0.085 ± 0.015 [2.16 ± 0.37] 0.200 ± 0.027 [5.08 ± 0.69] 0.200 ± 0.027 [5.08 ± 0.69] 0.200 ± 0.023 [5.08 ± 0.59] 0.063 [1.60] 0.243 [6.20] 0.115 [2.90] 0.115 [2.90] 0.243 [6.20] 0.243 [6.20] 0.243 [6.20] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.235 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.072 ± 0.008 [1.83 ± 0.20] 0.104 ± 0.010 [2.65 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] Note: The anode termination (D less B) will be a minimum of 0.010 (0.25), C Case = 0.005 (0.131) minimum * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 110 For technical questions, contact: [email protected] Document Number: 40011 Revision: 05-May-08 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague RATINGS AND CASE CODES µF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 0.10 C 0.15 C 0.22 C/S 0.33 C 0.47 0.68 S C S V C S S V 1.0 S C S S S X 1.5 C S S S V X 2.2 C S S S V X Y 3.3 C S S S V X Y Z 4.7 S S S V X X Z Z 6.8 S S V X X Y Z R 10 S V X X Y Y Z R 15 V X X Y Z Z R R 22 X X Y Y/Z Z R 33 X Y Z Z R R 47 Y Y Z R R 68 Y Z R R 100 Z Z R 120 R R R 150 R R R 180 R R 220 R R 330 R STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER (1) MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) 4 WVDC AT + 85 °C, SURGE = 5 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V 3.3 C 195D335X_004C2T 0.5 6 4.7 S 195D475X_004S2T 0.5 6 6.8 S 195D685X_004S2T 0.5 6 10 S 195D106X_004S2T 0.5 6 15 V 195D156X_004V2T 0.6 6 22 X 195D226X_004X2T 0.9 6 33 X 195D336X_004X2T 1.3 6 47 Y 195D476X_004Y2T 1.9 6 68 Y 195D686X_004Y2T 2.7 6 100 Z 195D107X_004Z2T 4.0 8 120 R 195D127X_004R2T 4.8 8 150 R 195D157X_004R2T 6.0 8 180 R 195D187X_004R2T 7.2 8 220 R 195D227X_004R2T 8.8 8 330 R 195D337X_004R2T 13.2 8 Note: For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. (1) Document Number: 40011 Revision: 05-May-08 For technical questions, contact: [email protected] www.vishay.com 111 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER (1) MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 180 220 C 195D225X_6R3C2T 0.5 S 195D335X_6R3S2T 0.5 S 195D475X_6R3S2T 0.5 S 195D685X_6R3S2T 0.5 V 195D106X_6R3V2T 0.6 X 195D156X_6R3X2T 0.9 X 195D226X_6R3X2T 1.3 Y 195D336X_6R3Y2T 2.0 Y 195D476X_6R3Y2T 2.8 Z 195D686X_6R3Z2T 4.1 Z 195D107X_6R3Z2T 6.0 R 195D127X_6R3R2T 7.2 R 195D157X_6R3R2T 9.0 R 195D187X_6R3R2T 10.8 R 195D227X_6R3R2T 13.2 10 WVDC AT + 85 °C, SURGE = 13V . . . 7 WVDC AT + 125 °C, SURGE = 9 V 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 S 195D105X_010S2T 0.4 C 195D155X_010C2T 0.5 S 195D225X_010S2T 0.5 S 195D335X_010S2T 0.5 S 195D475X_010S2T 0.5 V 195D685X_010V2T 0.7 X 195D106X_010X2T 1.0 X 195D156X_010X2T 1.5 Y 195D226X_010Y2T 2.2 Z 195D336X_010Z2T 3.0 Z 195D476X_010Z2T 4.7 R 195D686X_010R2T 6.8 R 195D107X_010R2T 10 R 195D127X_010R2T 12 R 195D157X_010R2T 15 16 WVDC AT + 85 °C, SURGE = 20 V . . . 10 WVDC AT + 125 °C, SURGE = 12 V 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 22 33 47 68 C S S S V X X Y Y Z Z R R 195D105X_016C2T 195D155X_016S2T 195D225X_016S2T 195D335X_016S2T 195D475X_016V2T 195D685X_016X2T 195D106X_016X2T 195D156X_016Y2T 195D226X_016Y2T 195D226X_016Z2T 195D336X_016Z2T 195D476X_016R2T 195D686X_016R2T 0.5 0.5 0.5 0.5 0.7 1.0 1.5 2.3 3.2 3.3 5.0 7.1 10.2 4 6 6 6 6 6 6 6 6 6 6 6 6 Note: (1) For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. www.vishay.com 112 For technical questions, contact: [email protected] Document Number: 40011 Revision: 05-May-08 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague MAX. DCL AT + 25 °C (µA) 20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V C 195D684X_020C2T 0.5 S 195D105X_020S2T 0.5 S 195D155X_020S2T 0.5 S 195D225X_020S2T 0.5 V 195D335X_020V2T 0.7 X 195D475X_020X2T 0.9 X 195D685X_020X2T 1.4 Y 195D106X_020Y2T 2.0 Z 195D156X_020Z2T 3.0 Z 195D226X_020Z2T 4.4 R 195D336X_020R2T 6.6 R 195D476X_020R2T 9.4 25 WVDC AT + 85 °C, SURGE = 32 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V C 195D474X_025C2T 0.5 S 195D684X_025S2T 0.5 S 195D105X_025S2T 0.5 S 195D155X_025S2T 0.5 V 195D225X_025V2T 0.6 X 195D335X_025X2T 0.8 X 195D475X_025X2T 1.2 Y 195D685X_025Y2T 1.7 Y 195D106X_025Y2T 2.5 Z 195D156X_025Z2T 3.8 R 195D226X_025R2T 5.5 R 195D336X_025R2T 8.3 35 WVDC AT + 85 °C, SURGE = 46 V . . . 23 WVDC AT + 125 °C, SURGE = 28 V C 195D334X_035C2T 0.5 S 195D474X_035S2T 0.5 S 195D684X_035S2T 0.5 S 195D105X_035S2T 0.5 V 195D155X_035V2T 0.5 X 195D225X_035X2T 0.8 Y 195D335X_035Y2T 1.2 Z 195D475X_035Z2T 1.6 Z 195D685X_035Z2T 2.4 Z 195D106X_035Z2T 3.5 R 195D156X_035R2T 5.3 R 195D226X_035R2T 7.7 50 WVDC AT + 85 °C, SURGE = 65 V . . . 33 WVDC AT + 125 °C, SURGE = 38 V C 195D104X_050C2T 0.5 C 195D154X_050C2T 0.5 C 195D224X_050C2T 0.5 S 195D224X_050S2T 0.4 S 195D334X_050S2T 0.5 V 195D474X_050V2T 0.5 V 195D684X_050V2T 0.5 X 195D105X_050X2T 0.5 X 195D155X_050X2T 0.8 Y 195D225X_050Y2T 1.1 Z 195D335X_050Z2T 1.7 Z 195D475X_050Z2T 2.4 R 195D685X_050R2T 3.4 R 195D106X_050R2T 5.0 MAX. DF AT + 25 °C 120 Hz (%) STANDARD RATINGS CAPACITANCE (µF) 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 0.1 0.15 0.22 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 CASE CODE PART NUMBER (1) 4 4 6 6 6 6 6 6 6 6 6 6 4 4 4 6 6 6 6 6 6 6 6 6 4 4 4 4 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4 6 6 6 6 6 6 Note: (1) For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. Document Number: 40011 Revision: 05-May-08 For technical questions, contact: [email protected] www.vishay.com 113 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY “S” Case “V” Case IMPEDANCE ESR 100 10 10 0.47 µF - 50 VDC Ω Ω 100 1 1 0.1 0.1 15 µF - 4 VDC 1K 10K 100K 1M 10M 100M 1K 10K FREQUENCY IN Hz 100K 1M 10M 100M FREQUENCY IN Hz “X” Case “Y” Case 1000 100 IMPEDANCE ESR 100 IMPEDANCE ESR 10 Ω Ω 10 6.8 µF - 20 VDC 22 µF - 10 VDC 1 1 0.1 0.1 10 µF - 16 VDC 47 µF - 6.3 VDC 0.01 100 1K 10K 100K 1M 0.01 10M 100 1K FREQUENCY IN Hz 10K 100K FREQUENCY IN Hz 1M 10M “Z” Case 100 IMPEDANCE ESR 10 Ω 4.7 µF - 50 VDC 1 0.1 100 µF - 6.3 VDC 0.01 100 1K 10K 100K 1M 10M FREQUENCY IN Hz www.vishay.com 114 For technical questions, contact: [email protected] Document Number: 40011 Revision: 05-May-08 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague ORDERING INFORMATION - EUROPEAN USE ONLY 195D TYPE 106 CAPACITANCE X0 CAPACITANCE TOLERANCE 004 DC VOLTAGE RATING AT + 85 °C D CASE CODE 2 TERMINATION T PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes Table T = Tape and Reel Style 2 is 180 mm Reel standard standard 2 = Solderable See Tape and Reel Coating 4 = Gold Plated Specifications. 8 = Solder Plated (60/40) Special Order Note: Preferred tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in millimeters W Tantalum wire Nib identifies Anode (+) terminal C L B J J D A H CASE CODE L ± 0.3 W ± 0.3 H (MAX.) A ± 0.3 B ± 0.3 A 2.8 ± 0.2 1.5 1.4 0.7 B 4.2 ± 0.2 1.4 1.6 0.8 D 4.2 ± 0.2 2.1 1.6 0.8 E 5.5 2.1 1.7 1.0 F 5.0 3.3 2.0 1.0 G 7.0 2.6 2.8 1.0 H 7.8 3.7 3.0 1.0 Note: The anode termination (D less B) will be a minimum of 0.010 (0.25), C Case = 0.005 (0.131) minimum C (MIN.) 1.6 2.5 2.5 3.2 3.6 4.5 5.0 0.3 0.3 0.5 0.8 0.8 0.8 0.8 195D STANDARD RANGE, RATINGS AND CASE CODES µF 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 2V 4V 6.3 V 10 V 15 V 20 V 25 V A A A A A A A A Document Number: 40011 Revision: 05-May-08 B B B D A A B B D E D E D E A B B D E F F For technical questions, contact: [email protected] D E F G G 35 V/40 V 50 V A A A B B D D E F F G H A A B B D D E F F G H www.vishay.com 115 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague 195D STANDARD RANGE, RATINGS AND CASE CODES 15 22 33 47 68 100 E F F F G H G H G H G H G H H H STANDARD RATINGS CAPACITANCE (µF) 3.3 4.7 6.8 10 2.2 4.7 10 15 33 68 100 1.5 3.3 6.8 10 22 47 68 1.0 2.2 4.7 6.8 15 47 100 0.47 0.68 1.0 1.5 3.3 4.7 10 22 33 CASE CODE PART NUMBER MAX. DCL AT + 25 °C (µA) 2 WVDC AT + 85 °C, SURGE = 2.6 V . . . 1.2 WVDC AT + 125 °C, SURGE = 1.6 V A 195D335X_002A2T 0.5 A 195D475X_002A2T 0.5 A 195D685X_002A2T 0.5 A 195D106X_002A2T 0.6 4 WVDC AT + 85 °C, SURGE = 5 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V A 195D225X_004A2T 0.5 B 195D475X_004B2T 0.5 D 195D106X_004D2T 0.5 E 195D156X_004E2T 0.6 F 195D336X_004F2T 1.3 G 195D686X_004G2T 2.7 H 195D107X_004H2T 4.0 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V A 195D155X_6R3A2T 0.5 B 195D335X_6R3B2T 0.5 D 195D685X_6R3D2T 0.5 E 195D106X_6R3E2T 0.6 F 195D226X_6R3F2T 1.3 G 195D476X_6R3G2T 2.8 H 195D686X_6R3H2T 4.1 10 WVDC AT + 85 °C, SURGE = 13 V . . . 7 WVDC AT + 125 °C, SURGE = 9 V A 195D105X_010A2T 0.5 B 195D225X_010B2T 0.5 D 195D475X_010D2T 0.5 E 195D685X_010E2T 0.7 F 195D156X_010F2T 1.5 H 195D476X_010H2T 4.7 H 195D107X_010H2T 8.0 15/16 WVDC AT + 85 °C, SURGE = 20 V...10 WVDC AT + 125 °C, SURGE = 12 V A 195D474X_015A2T 0.5 A 195D684X_015A2T 0.5 B 195D105X_015B2T 0.5 B 195D155X_015B2T 0.5 D 195D335X_015D2T 0.5 E 195D475X_015E2T 0.7 F 195D106X_015F2T 1.5 G 195D226X_015G2T 3.3 H 195D336X_015H2T 5.0 MAX. DF AT + 25 °C 120 Hz (%) 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 6 6 6 6 6 6 7 6 6 6 6 6 6 6 6 6 Note: * For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“ www.vishay.com 116 For technical questions, contact: [email protected] Document Number: 40011 Revision: 05-May-08 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) 20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V 0.47 A 195D474X_020A2T 0.5 6 1.0 B 195D105X_020B2T 0.5 6 2.2 D 195D225X_020D2T 0.5 6 3.3 E 195D335X_020E2T 0.7 6 6.8 F 195D685X_020F2T 1.4 6 15 G 195D156X_020G2T 3.0 6 H 195D226X_020H2T 4.4 6 22 25 WVDC AT + 85 °C, SURGE = 32 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V 0.33 A 195D334X_025A2T 0.5 6 0.68 B 195D684X_025B2T 0.5 6 1.5 D 195D155X_025D2T 0.5 6 2.2 E 195D225X_025E2T 0.6 6 4.7 F 195D475X_025F2T 1.2 6 6.8 G 195D685X_025G2T 1.7 6 10 G 195D106X_025G2T 2.5 6 H 195D156X_025H2T 3.8 6 15 35/40 WVDC AT + 85 °C, SURGE = 46 / 52 V. . . 23 / 25 WVDC AT + 125 °C, SURGE = 28 / 30 V 0.10 A 195D104X_035A2T 0.5 6 0.15 A 195D154X_035A2T 0.5 6 0.22 A 195D224X_035A2T 0.5 6 0.33 B 195D334X_035B2T 0.5 6 0.47 B 195D474X_035B2T 0.5 6 0.68 D 195D684X_035D2T 0.5 6 1.0 D 195D105X_035D2T 0.5 6 1.5 E 195D155X_035E2T 0.5 6 2.2 F 195D225X_035F2T 0.8 6 3.3 F 195D335X_035F2T 1.2 6 4.7 G 195D475X_035G2T 1.6 6 H 195D685X_035H2T 2.4 6 6.8 50 WVDC AT + 85 °C, SURGE = 65 V . . . 33 WVDC AT + 125 °C, SURGE = 38 V 0.10 A 195D104X_050A2T 0.5 6 0.15 A 195D154X_050A2T 0.5 6 0.22 B 195D224X_050B2T 0.5 6 0.33 B 195D334X_050B2T 0.5 6 0.47 D 195D474X_050D2T 0.5 6 0.68 D 195D684X_050D2T 0.5 6 1.0 E 195D105X_050E2T 0.5 6 1.5 F 195D155X_050F2T 0.8 6 2.2 F 195D225X_050F2T 1.1 6 3.3 G 195D335X_050G2T 1.7 6 4.7 H 195D475X_050H2T 2.4 6 Note: * For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. Document Number: 40011 Revision: 05-May-08 For technical questions, contact: [email protected] www.vishay.com 117 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1