Pb Free Plating Product ISSUED DATE :2005/02/18 REVISED DATE : GL9575 BVDSS RDS(ON) ID P-CHANNEL ENHANCEMENT MODE POWER MOSFET -60V 90m -4A Description The GL9575 provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The SOT-223 package is universally preferred for all commercial-industrial surface mount applications and suited for low voltage application such as DC/DC converters. Features *Simple Drive Requirement *Lower On-resistance *Fast Switching Characteristic Package Dimensions SOT-223 REF. A C D E I H Millimeter Min. Max. 6.70 7.30 2.90 3.10 0.02 0.10 0 10 0.60 0.80 0.25 0.35 REF. B J 1 2 3 4 5 Millimeter Min. Max. 13 TYP. 2.30 REF. 6.30 6.70 6.70 6.30 3.30 3.70 3.30 3.70 1.40 1.80 Absolute Maximum Ratings Parameter Drain-Source Voltage Gate-Source Voltage Ratings Unit VDS -60 V VGS Continuous Drain Current 3 Continuous Drain Current 3 Pulsed Drain Current Symbol 1 25 V ID @TA=25 -4.0 A ID @TA=70 -3.2 A -20 A 3 W IDM PD @TA=25 Total Power Dissipation Linear Derating Factor 0.02 Operating Junction and Storage Temperature Range Tj, Tstg -55 ~ +150 Symbol Value Rthj-a 45 W/ Thermal Data Parameter Thermal Resistance Junction-ambient GL9575 3 Max. Unit /W Page: 1/4 ISSUED DATE :2005/02/18 REVISED DATE : Electrical Characteristics(Tj = 25 Parameter Unless otherwise specified) Symbol Min. Typ. Max. Unit Drain-Source Breakdown Voltage BVDSS -60 - - V Breakdown Voltage Temperature Coefficient BVDSS / Tj - -0.04 - Gate Threshold Voltage VGS(th) -1.0 - -3.0 V VDS=VGS, ID=-250uA gfs - 7 - S VDS=-10V, ID=-4A IGSS - - 100 nA VGS= - - -1 uA VDS=-60V, VGS=0 - - -25 uA VDS=-48V, VGS=0 - - 90 - - 120 Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 ) Drain-Source Leakage Current(Tj=70 ) Static Drain-Source On-Resistance2 IDSS RDS(ON) V/ m Test Conditions VGS=0, ID=-250uA Reference to 25 , ID=-1mA 25V VGS=-10V, ID=-4A VGS=-4.5V, ID=-3A Total Gate Charge2 Qg - 18 28 Gate-Source Charge Qgs - 5 - Gate-Drain (“Miller”) Change Qgd - 7 - Td(on) - 12 - Tr - 5 - Td(off) - 68 - Tf - 32 - Input Capacitance Ciss - 1745 2790 Output Capacitance Coss - 165 - Reverse Transfer Capacitance Crss - 125 - Symbol Min. Typ. Max. Unit VSD - - -1.2 V IS=-2A, VGS=0V Reverse Recovery Time Trr - 56 - ns Reverse Recovery Charge Qrr - 146 - nC IS=-4A, VGS=0V dI/dt=100A/ s Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time nC ID=-4A VDS=-48V VGS=-4.5V ns VDS=-30V ID=-1A VGS=-10V RG=3.3 RD=30 pF VGS=0V VDS=-25V f=1.0MHz Source-Drain Diode Parameter 2 Forward On Voltage 2 Test Conditions Notes: 1. Pulse width limited by Max. junction temperature. 2. Pulse width 300us, duty cycle 2%. 3. Surface mounted on 1 in2 copper pad of FR4 board; 125 /W when mounted on Min. copper pad. GL9575 Page: 2/4 ISSUED DATE :2005/02/18 REVISED DATE : Characteristics Curve Fig 1. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 5. Forward Characteristics of Reverse Diode GL9575 Fig 2. Typical Output Characteristics Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 6. Gate Threshold Voltage v.s. Junction Temperature Page: 3/4 ISSUED DATE :2005/02/18 REVISED DATE : Fig 7. Gate Charge Characteristics Fig 9. Maximum Safe Operating Area Fig 11. Switching Time Circuit Fig 8. Typical Capacitance Characteristics Fig 10. Effective Transient Thermal Impedance Fig 12. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GL9575 Page: 4/4