GM5510 STANDARD VOLTAGE DETECTOR Description Features The GM5510 series are highly precise and low power consumption voltage detectors. Manufactured by using CMOS and laser trimming technologies. Detect voltage is extremely accurate with minimal temperature drift. Both CMOS and N-channel open drain output configurations are available. Highly accurate: ± 2% Low power consumption: TYP 0.7µA (VIN = 1.5V) Detect voltage range: 1.6V to 6.0V in 0.1V increments Operating voltage range: 0.7 to 10.0V Detect voltage temperature characteristic: TYP ± 100 ppm/ °C Output Configuration: CMOS or N channel open drain Application Microprocessor reset circuitry Memory battery back-up circuits Power failure detection System battery life and charge voltage monitors Power-on reset circuits Typical Application Circuits VIN R 100KΩ VIN GM5510C VOUT VSS CMOS Output VIN GM5510N VOUT VSS N-CH Open Drain Output www.gammamicro.com.tw GM5510V2.01 VIN 1 GM5510 STANDARD VOLTAGE DETECTORS Marking Information and Pin Configurations (Top View) SOT23 SOT89 VIN 2 GAVYW 1 VOUT 3 VSS GA: GM5510N, N-CH Open Drain V: Detect Voltage (See “Voltage Suffix” table) Y: Year W: Week Code GM5510N VVAYWW VOUT 1 2 VIN 3 VSS N: N-CH Open Drain VV: Detect Voltage (See “Voltage Suffix” table) Y: Year WW: Week VIN 2 GAVYW 1 VOUT 3 VSS GA: GM5510N, N-CH Open Drain, Green Product V: Detect Voltage (See “Voltage Suffix” table) Y: Year W: Week Code GM5510N VVAYWW VOUT 1 2 VIN 3 VSS N: N-CH Open Drain, Green Product VV: Detect Voltage (See “Voltage Suffix” table) Y: Year WW: Week VIN 2 GBVYW 1 VOUT 3 VSS GA: GM5510C, CMOS V: Detect Voltage (See “Voltage Suffix” table) Y: Year W: Week Code GM5510C VVAYWW VOUT 1 2 VIN 3 VSS C: CMOS, VV: Detect Voltage (See “Voltage Suffix” table) Y: Year WW: Week VIN 2 GM5510V2.01 GBVYW 2 1 VOUT 3 VSS GB: GM5510C, CMOS, Green Product V: Detect Voltage (See “Voltage Suffix” table) Y: Year W: Week Code GM5510C VVAYWW VOUT 1 2 VIN 3 VSS C: CMOS, Green Product VV: Detect Voltage (See “Voltage Suffix” table) Y: Year WW: Week GM5510 STANDARD VOLTAGE DETECTOR Output Configuration Detect Voltage Voltage Suffix Package Shipping GM5510C-1.8ST23R CMOS 1.8V C SOT-23 3,000 Units / Reel GM5510C-2.0ST23R CMOS 2.0V E SOT-23 3,000 Units / Reel GM5510C-2.7ST23R CMOS 2.7V K SOT-23 3,000 Units / Reel GM5510C-2.9ST23R CMOS 2.9V M SOT-23 3,000 Units / Reel GM5510C-2.93ST23R CMOS 2.93V S SOT-23 3,000 Units / Reel GM5510C-3.0ST23R CMOS 3.0V N SOT-23 3,000 Units / Reel GM5510C-3.08ST23R CMOS 3.08V P SOT-23 3,000 Units / Reel GM5510C-3.3ST23R CMOS 3.3V Q SOT-23 3,000 Units / Reel GM5510C-3.6ST23R CMOS 3.6V T SOT-23 3,000 Units / Reel GM5510C-4.0ST23R CMOS 4.0V X SOT-23 3,000 Units / Reel GM5510C-4.1ST23R CMOS 4.1V Y SOT-23 3,000 Units / Reel GM5510C-4.2ST23R CMOS 4.2V Z SOT-23 3,000 Units / Reel GM5510C-1.8ST89R CMOS 1.8V 18 SOT89 1,000 Units / Reel GM5510C-2.0ST89R CMOS 2.0V 20 SOT89 1,000 Units / Reel GM5510C-2.7ST89R CMOS 2.7V 27 SOT89 1,000 Units / Reel GM5510C-2.9ST89R CMOS 2.9V 29 SOT89 1,000 Units / Reel GM5510C-3.0ST89R CMOS 3.0V 30 SOT89 1,000 Units / Reel GM5510C-3.08ST89R CMOS 3.08V 31 SOT89 1,000 Units / Reel GM5510C-3.3ST89R CMOS 3.3V 33 SOT89 1,000 Units / Reel GM5510C-3.6ST89R CMOS 3.6V 36 SOT89 1,000 Units / Reel GM5510C-4.0ST89R CMOS 4.0V 40 SOT89 1,000 Units / Reel GM5510C-4.1ST89R CMOS 4.1V 41 SOT89 1,000 Units / Reel GM5510C-4.2ST89R CMOS 4.2V 42 SOT89 1,000 Units / Reel Ordering Number GM5510V2.01 Ordering Information – Pb Free Products 3 GM5510 STANDARD VOLTAGE DETECTORS Ordering Information – Pb Free Products (continued) Output Configuration Detect Voltage Voltage Suffix Package Shipping GM5510N-1.8ST23R N-CH Open Drain 1.8V C SOT-23 3,000 Units / Reel GM5510N-2.0ST23R N-CH Open Drain 2.0V E SOT-23 3,000 Units / Reel GM5510N-2.7ST23R N-CH Open Drain 2.7V K SOT-23 3,000 Units / Reel GM5510N-2.9ST23R N-CH Open Drain 2.9V M SOT-23 3,000 Units / Reel GM5510N-2.93ST23R N-CH Open Drain 2.93V S SOT-23 3,000 Units / Reel GM5510N-3.0ST23R N-CH Open Drain 3.0V N SOT-23 3,000 Units / Reel GM5510N-3.08ST23R N-CH Open Drain 3.08V P SOT-23 3,000 Units / Reel GM5510N-3.3ST23R N-CH Open Drain 3.3V Q SOT-23 3,000 Units / Reel GM5510N-3.6ST23R N-CH Open Drain 3.6V T SOT-23 3,000 Units / Reel GM5510N-4.0ST23R N-CH Open Drain 4.0V X SOT-23 3,000 Units / Reel GM5510N-4.1ST23R N-CH Open Drain 4.1V Y SOT-23 3,000 Units / Reel GM5510N-4.2ST23R N-CH Open Drain 4.2V Z SOT-23 3,000 Units / Reel GM5510N-1.8ST89R N-CH Open Drain 1.8V 18 SOT89 1,000 Units / Reel GM5510N-2.0ST89R N-CH Open Drain 2.0V 20 SOT89 1,000 Units / Reel GM5510N-2.7ST89R N-CH Open Drain 2.7V 27 SOT89 1,000 Units / Reel GM5510N-2.9ST89R N-CH Open Drain 2.9V 29 SOT89 1,000 Units / Reel GM5510N-3.0ST89R N-CH Open Drain 3.0V 30 SOT89 1,000 Units / Reel GM5510N-3.08ST89R N-CH Open Drain 3.08V 31 SOT89 1,000 Units / Reel GM5510N-3.3ST89R N-CH Open Drain 3.3V 33 SOT89 1,000 Units / Reel GM5510N-3.6ST89R N-CH Open Drain 3.6V 36 SOT89 1,000 Units / Reel GM5510N-4.0ST89R N-CH Open Drain 4.0V 40 SOT89 1,000 Units / Reel GM5510N-4.1ST89R N-CH Open Drain 4.1V 41 SOT89 1,000 Units / Reel GM5510N-4.2ST89R N-CH Open Drain 4.2V 42 SOT89 1,000 Units / Reel GM5510V2.01 Ordering Number 4 GM5510 STANDARD VOLTAGE DETECTOR Ordering Number Output Configuration Detect Voltage Voltage Suffix Package Shipping GM5510C-1.8ST23RG CMOS 1.8V C SOT-23 3,000 Units / Reel GM5510C-2.0ST23RG CMOS 2.0V E SOT-23 3,000 Units / Reel GM5510C-2.7ST23RG CMOS 2.7V K SOT-23 3,000 Units / Reel GM5510C-2.9ST23RG CMOS 2.9V M SOT-23 3,000 Units / Reel GM5510C-2.93ST23RG CMOS 2.93V S SOT-23 3,000 Units / Reel GM5510C-3.0ST23RG CMOS 3.0V N SOT-23 3,000 Units / Reel GM5510C-3.08ST23RG CMOS 3.08V P SOT-23 3,000 Units / Reel GM5510C-3.3ST23RG CMOS 3.3V Q SOT-23 3,000 Units / Reel GM5510C-3.6ST23RG CMOS 3.6V T SOT-23 3,000 Units / Reel GM5510C-4.0ST23RG CMOS 4.0V X SOT-23 3,000 Units / Reel GM5510C-4.1ST23RG CMOS 4.1V Y SOT-23 3,000 Units / Reel GM5510C-4.2ST23RG CMOS 4.2V Z SOT-23 3,000 Units / Reel GM5510C-1.8ST89RG CMOS 1.8V 18 SOT89 1,000 Units / Reel GM5510C-2.0ST89RG CMOS 2.0V 20 SOT89 1,000 Units / Reel GM5510C-2.7ST89RG CMOS 2.7V 27 SOT89 1,000 Units / Reel GM5510C-2.9ST89RG CMOS 2.9V 29 SOT89 1,000 Units / Reel GM5510C-3.0ST89RG CMOS 3.0V 30 SOT89 1,000 Units / Reel GM5510C-3.08ST89RG CMOS 3.08V 31 SOT89 1,000 Units / Reel GM5510C-3.3ST89RG CMOS 3.3V 33 SOT89 1,000 Units / Reel GM5510C-3.6ST89RG CMOS 3.6V 36 SOT89 1,000 Units / Reel GM5510C-4.0ST89RG CMOS 4.0V 40 SOT89 1,000 Units / Reel GM5510C-4.1ST89RG CMOS 4.1V 41 SOT89 1,000 Units / Reel GM5510C-4.2ST89RG CMOS 4.2V 42 SOT89 1,000 Units / Reel GM5510V2.01 Ordering Information – Green Products 5 GM5510 STANDARD VOLTAGE DETECTORS GM5510V2.01 Ordering Information – Green Products (continued) 6 Ordering Number Output Configuration Detect Voltage Voltage Suffix Package Shipping GM5510N-1.8ST23RG N-CH Open Drain 1.8V C SOT-23 3,000 Units / Reel GM5510N-2.0ST23RG N-CH Open Drain 2.0V E SOT-23 3,000 Units / Reel GM5510N-2.7ST23RG N-CH Open Drain 2.7V K SOT-23 3,000 Units / Reel GM5510N-2.9ST23RG N-CH Open Drain 2.9V M SOT-23 3,000 Units / Reel GM5510N-2.93ST23RG N-CH Open Drain 2.93V S SOT-23 3,000 Units / Reel GM5510N-3.0ST23RG N-CH Open Drain 3.0V N SOT-23 3,000 Units / Reel GM5510N-3.08ST23RG N-CH Open Drain 3.08V N SOT-23 3,000 Units / Reel GM5510N-3.3ST23RG N-CH Open Drain 3.3V Q SOT-23 3,000 Units / Reel GM5510N-3.6ST23RG N-CH Open Drain 3.6V T SOT-23 3,000 Units / Reel GM5510N-4.0ST23RG N-CH Open Drain 4.0V X SOT-23 3,000 Units / Reel GM5510N-4.1ST23RG N-CH Open Drain 4.1V Y SOT-23 3,000 Units / Reel GM5510N-4.2ST23RG N-CH Open Drain 4.2V Z SOT-23 3,000 Units / Reel GM5510N-1.8ST89RG N-CH Open Drain 1.8V 18 SOT89 1,000 Units / Reel GM5510N-2.0ST89RG N-CH Open Drain 2.0V 20 SOT89 1,000 Units / Reel GM5510N-2.7ST89RG N-CH Open Drain 2.7V 27 SOT89 1,000 Units / Reel GM5510N-2.9ST89RG N-CH Open Drain 2.9V 29 SOT89 1,000 Units / Reel GM5510N-3.0ST89RG N-CH Open Drain 3.0V 30 SOT89 1,000 Units / Reel GM5510N-3.08ST89RG N-CH Open Drain 3.08V 30 SOT89 1,000 Units / Reel GM5510N-3.3ST89RG N-CH Open Drain 3.3V 33 SOT89 1,000 Units / Reel GM5510N-3.6ST89RG N-CH Open Drain 3.6V 36 SOT89 1,000 Units / Reel GM5510N-4.0ST89RG N-CH Open Drain 4.0V 40 SOT89 1,000 Units / Reel GM5510N-4.1ST89RG N-CH Open Drain 4.1V 41 SOT89 1,000 Units / Reel GM5510N-4.2ST89RG N-CH Open Drain 4.2V 42 SOT89 1,000 Units / Reel GM5510 STANDARD VOLTAGE DETECTOR Absolute Maximum Ratings (Note 1) Rating Symbol Value Unit Input Voltage VIN 12 V Output Current IOUT 50 mA CMOS Output Voltage N-CH Open Drain Power Dissipation SOT-23 SOT-89 Operating Ambient Temperature Storage Temperature Range VSS – 0.3 to VIN + 0.3 VOUT VSS – 0.3 to 12 150 PD 500 V mW TA - 40 to 125 ℃/W TSTG - 65 to 150 ℃ + 260 ℃ Lead Temperature (Soldering, 10 sec) Block Diagram (1) CMOS Output (2) Nch Open Drain Output VIN VIN VOUT VOUT + VREF VREF VSS VSS GM5510V2.01 + - 7 GM5510 STANDARD VOLTAGE DETECTORS Electrical Characteristics: VDF(T) = 1.6 to 6.0V ± 2% Parameter Detect Voltage Hysteresis Range Supply Current Operating Voltage Output Current Temperature Characteristi cs Symbol Min Typ Max Unit Circuit VDF VDF x 0.98 VDF VDF x 1.02 V 1 VHYS VDF x 0.02 VDF x 0.05 VDF x 0.08 V 1 VIN = 1.5V 0.7 2.3 VIN = 2.0V 0.8 2.7 VIN = 3.0V 0.9 3.0 µA 2 VIN = 4.0V 1.0 3.2 VIN = 5.0V 1.1 3.6 V 1 mA 3 ppm/° C 5 Ms 5 ISS VIN IOUT ∆VDF ∆TOPR x VDF Conditions VDF(T) = 1.6V to 6.0V VIN = 1.0V VIN = 2.0V Nch VIN = VDS = 3.0V 5V VIN = 4.0V VIN = 5.0V Pch VIN = VDS = 8.0V 2.1V -40°C ≤ TOPR ≤-85°C GM5510V2.01 Delay Time (VDR → VOUT tDLY Inversion) Note: VDF(T): Established Detect Voltage Value Release Voltage: VDR = VDF + VHYS 8 0.7 10.0 1.0 2.2 3.0 7.7 5.0 10.1 6.0 11.5 7.0 13.0 -10 -2.0 ± 100 0.2 GM5510 STANDARD VOLTAGE DETECTOR Function Description – CMOS Output Configuration c When input voltage (VIN) rises above detect voltage (VDF), output voltage (VOUT) will be equal to VIN. (A Condition of high impedance exists with N-ch open drain output Configurations) d When input voltage (VIN) falls below detect voltage (VDF), output voltage (VOUT) will be equal to the ground voltage (VSS) level. e When input voltage (VIN) falls to a level below that of the minimum operating voltage (VMIN), output will become unstable. In this condition, VIN will equal to the pulled-up output (Should output be pulled-up). f When input voltage (VIN) rises above the ground voltage (VSS) level, output will be unstable at levels below the minimum operating voltage (VMIN). Between the VMIN and detect release voltage (VDR) levels, the ground voltage (VSS) level will be maintained. g When input voltage (VIN) rises above detect release voltage (VDR), output voltage (VOUT) will be equal to VIN. (A Condition of high impedance exists with N-ch open drain output Configurations). h The difference between VDR and VDF represents the hysteresis range. 6 INPUT VOLTAGE (VIN) DETECT RELEASE VOLTAGE (VDR) DETECT VOLTAGE (VDF) MIN. OPERATING VOLTAGE (VMIN) GROUND VOLTAGE (VDF) OUTPUT VOLTAGE (VOUT) GROUND VOLTAGE (VSS) 2 3 4 5 Timing Chart GM5510V2.01 1 9 GM5510 STANDARD VOLTAGE DETECTORS Test Circuits for Measurements Test Circuit 1 Test Circuit 2 A R1 100K VIN VIN (Note 1) VOUT VIN VIN VOUT V VSS VSS Test Circuit 3 Test Circuit 4 VIN VOUT VIN VSS A VSS VDS R1 100K (Note 1) GM5510V2.01 VIN 10 VOUT VOUT VIN Test Circuit 5 VSS VDS VIN Measurement waveform A GM5510 STANDARD VOLTAGE DETECTOR Application Notes 1. Please use this IC within the stated maximum ratings. Operation beyond these limits may cause degrading or permanent damage to the device. 2. When a resistor is connected between the VIN pin and the input with CMOS output configurations, oscillation may occur as a result of voltage drops at RIN if load Current (IOUT) exists. (Refer to the Oscillation Description (1) below) 3. When a resistor is connected between the VIN pin and the input with CMOS output configurations, irrespective of N-ch output configurations, oscillation may occur as a result of through Current at the time of voltage release even if load Current (IOUT) does not exist. Refer to the Oscillation Description (2) below) 4. With a resistor is connected between the VIN pin and the input, detect and release voltage will rise as a result of the IC's supply current flowing through the VIN pin. 5. In order to stabilize the IC's operations, please ensure that VIN pin's input frequency's rise and fall times are more than several µSec/V. 6. Please use N-ch open drains configuration, when a resistor RIN is connected between the VIN pin and power source. In such casese, please ensure that RIN is less than 10kΩ and that C is more than 0.1µF RIN GM5510N VIN C VOUT VSS Circuit using an input resistor Oscillation Description (1) Output Current oscillation with the CMOS output Configuration When the voltage applied at IN rises, release operations commence and the detector's output voltage increases. Load Current (IOUT) will flow at RL. Because a voltage drop (RIN x IOUT) is produced at the RIN resistor, located between the input (IN) and the VIN pin, the load current will flow via the IC'S VIN pin. The voltage drop will also lead to a fall in the voltage level at the VIN pin. When the VIN pin voltage level falls below the detect voltage level, detect operations will commence. Following detect operations, load Current flow will cease and since voltage drop at RIN will disappear, the voltage level at the VIN pin will rise and release operations will begin over again. Oscillation may occur with this "release – detect – release" repetition. Further, this condition will also appear via means of a Similar mechanism during detect operations. (2) Oscillation as a result of through Current Since the GM5510 Series are CMOS IC'S, through current will flow when the IC'S internal circuit switching operates (during release and detect operations). Consequently, oscillation is liable to occur as a result of drops in voltage at the through Current's resistor (RIN) during release voltage operations. (Refer to Figure 3) Since hysteresis exists during detect operations, oscillation is unlikely to occur. Input RIN RIN X IOUT Voltage drop RIN GM5510C VIN IOUT VOUT VSS Figure 2 Oscillation in relation to output current RIN X IOUT Voltage drop GM5510C GM5510N VIN IOUT VOUT VSS Include through current Figure 3 Oscillation in relation to through urrent GM5510V2.01 Input 11 GM5510 STANDARD VOLTAGE DETECTORS TYPICAL PERFORMANCE CHARACTERISTICS 3.5 3.5 3.0 3.0 3.0 2.5 2.0 TA = 25°C 1.5 TA = 85°C 1.0 0.5 0 TA = -40°C 0 2 4 6 8 Supply Current: ISS (µA) 3.5 Supply Current: ISS (µA) Supply Current: ISS (µA) Supply Current vs. Input voltage 2.5 2.0 TA = 85°C TA = 25°C 1.5 1.0 0.5 0 10 TA = -40°C 0 2 4 6 2.0 TA = 25°C 1.5 0.5 TA = -40°C 0 2 Input Voltage: VIN (V) GM5510C-27(2.7V) Input Voltage: VIN (V) GM5510C-18(1.8V) TA = 85°C 1.0 0 10 8 2.5 4 6 10 8 Input Voltage: VIN (V) GM5510C-36(3.6V) 1.85 VDR 1.80 VDF 1.75 -50 -25 0 25 50 75 100 2.80 VDR 2.75 2.70 VDF 2.65 -50 -25 0 25 50 75 100 Detect, Release Voltage: VDF, VDR (V) 1.90 Detect, Release Voltage: VDF, VDR (V) Detect, Release Voltage: VDF, VDR (V) Detect, Release Voltage vs. Ambient Temperature 3.8 VDR 3.7 3.6 VDF 3.5 -50 -25 0 25 50 75 Ambient Temp.: TA (°C) Ambient Temp.: TA (°C) Ambient Temp.: TA (°C) GM5510C-18(1.8V) GM5510C-27(2.7V) GM5510C-36(3.6V) 100 Output Voltage vs. Input Voltage 1 0 1 TA = 25°C 2 1 00 2 Output Voltage: VOUT(V) Output Voltage: VOUT(V) Output Voltage: VOUT(V) TA = 25°C 0 4 3 2 1 2 3 3 TA = 25°C 2 1 0 0 1 2 4 3 Input Voltage: VIN (V) Input Voltage: VIN (V) Input Voltage: VIN (V) GM5510C-18(1.8V) GM5510C-27(2.7V) GM5510C-36(3.6V) N-ch Driver Output current vs. VDS 6 4 VIN = 1.0V 2 0 0.5 1.0 1.5 VDS (V) GM5510C-18(1.8V) 2.0 Output Current: IOUT (mA) Output Current: IOUT (mA) GM5510V2.01 12 VIN = 1.5V 8 0 40 30 TA = 25°C TA = 25°C VIN = 2.5V 25 20 VIN = 2.0V 15 10 VIN = 1.5V 5 0 Output Current: IOUT (mA) 10 TA = 25°C VIN = 2.5V 20 VIN = 2.0V 10 VIN = 1.5V VIN = 1.0V 0 0.5 1.0 1.5 2.0 2.5 VDS (V) GM5510C-27(2.7V) 3.0 VIN = 3.0V 30 0 0 0.5 1.0 1.5 2.0 2.5 VDS (V) GM5510C-36(3.6V) 3.0 GM5510 STANDARD VOLTAGE DETECTOR TYPICAL PERFORMANCE CHARACTERISTICS N-ch Driver Output current vs. VDS 1000 VIN = 0.8V 800 600 VIN = 0.7V 400 200 0 0 0.2 0.4 0.6 0.8 1000 TA = 25°C VIN = 0.8V 800 600 VIN = 0.7V 400 200 0 0 1.0 Output Current: IOUT (µA) TA = 25°C Output Current: IOUT (µA) Output Current: IOUT (µA) 1000 0.2 0.4 0.6 0.8 TA = 25°C 600 VIN = 0.7V 400 200 0 0 1.0 VIN = 0.8V 800 0.2 0.4 0.6 0.8 VDS(V) VDS(V) VDS(V) GM5510C-18(1.8V) GM5510C-27(2.7V) GM5510C-36(3.6V) 1.0 N-ch DRIVER OUTPUT CURRENT VS. INPUT VOLTAGE 30 25 TA = 40°C 10 TA = 25°C 5 TA = 85°C 0 0 0.5 1.0 1.5 VIN = 0.5V 20 TA = 40°C 15 TA = 25°C 10 5 0 2.0 Output Current: IOUT (mA) VIN = 0.5V Output Current: IOUT (mA) Output Current: IOUT (mA) 15 TA = 85°C 0 0.5 1.0 1.5 TA = 40°C 20 15 TA = 25°C 10 TA = 85°C 5 0 2.0 VIN = 0.5V 25 0 1 2 3 4 VIN (V) VIN (V) VIN (V) GM5510C-18(1.8V) GM5510C-27(2.7V) GM5510C-36(3.6V) P-ch DRIVER OUTPUT CURRENT VS. INPUT VOLTAGE 15 1.5V 1.0V 5 0.5V 0 0 2 4 6 8 10 10 1.5V 1.0V 5 0.5V 0 0 2 4 6 8 10 VDS = 2.1V 10 1.5V 1.0V 5 0.5V 0 0 2 4 6 8 VIN (V) VIN (V) VIN (V) GM5510C-18(1.8V) GM5510C-27(2.7V) GM5510C-36(3.6V) 10 GM5510V2.01 10 15 VDS = 2.1V Output Current: IOUT (mA) VDS = 2.1V Output Current: IOUT (mA) Output Current: IOUT (mA) 15 13 GM5510 STANDARD VOLTAGE DETECTORS Package Outline Dimensions – SOT 23 0.110 - 0.120 (2.80 - 3.04) 0.003 - 0.007 (0.08 - 0.18) 0.013 - 0.017 (0.34 - 0.44) 0.013 - 0.017 (0.34 - 0.44) 0.083 - 0.104 (2.11 - 2.62) 0.047 - 0.055 (1.20 - 1.40) 0 - 8 typ 0.075 Typ. (1.91) 0.0150 - 0.0200 (0.382 - 0.508) 0.037 (0.93) Typ. 0.0005 - 0.0040 (0.025 - 0.102) Package Outline Dimensions – SOT 89 0.173 - 0.181 (4.39 - 4.59) 0.067 - 0.072 (1.70 - 1.82) 0.084 - 0.090 (2.13 - 2.28) 0.155 - 0.167 (3.94 - 4.24) 0.090 - 0.120 (2.28 - 2.59) 8 0.035 - 0.047 (0.89 - 1.19) 0.016 - 0.019 (0.33 - 0.48) 0.059 BSC (1.49) BSC GM5510V2.01 0.118 BSC (2.99) BSC 14 0.055 - 0.063 (1.39 - 1.60) 0.015 - 0.017 (0.38 - 0.43) GM5510 STANDARD VOLTAGE DETECTOR Ordering Number GM 5510 C APM Circuit Type ST23 R Output Configuration Package Type Shipping Type C: CMOS N: N - CH Open Drain ST25: SOT 25 R: Tape & Reel G Blank: Pb-free G:Green Note: Pb-free products: ♦ RoHS compliant and compatible with the current require-ments of IPC/JEDEC J-STD-020. ♦ Suitable for use in SnPb or Pb-free soldering processes with 100% matte tin (Sn) plating. Green products: Lead-free (RoHS compliant) ♦ Halogen free(Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight) GM5510V2.01 ♦ 8 10 6 15