AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M H11AA4-M PACKAGE SCHEMATIC 1 6 BASE 2 5 COLL 3 4 EMITTER DESCRIPTION The H11AAX-M series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single silicon phototransistor output. FEATURES • • • • Bi-polar emitter input Built-in reverse polarity input protection Underwriters Laboratory (UL) recognized File #E90700, Volume 2 VDE approved File #102497 (ordering option ‘V’) APPLICATIONS • AC line monitor • Unknown polarity DC sensor • Telephone line interface © 2004 Fairchild Semiconductor Corporation Page 1 of 9 1/9/04 AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M H11AA4-M ABSOLUTE MAXIMUM RATINGS (TA =25°C Unless otherwise specified) Parameter Symbol Device Value Units TOTAL DEVICE Storage Temperature TSTG All -40 to +150 °C Operating Temperature TOPR All -40 to +100 °C Lead Solder Temperature TSOL All 260 for 10 sec °C 250 mW 2.94 mW/°C Total Device Power Dissipation Derate Linearly From 25°C PD All EMITTER Continuous Forward Current IF All 60 mA IF(pk) All ±1.0 A PD All Continuous Collector Current IC All Detector Power Dissipation Derate linearity from 25°C PD All Forward Current – Peak (1 µs pulse, 300 pps) LED Power Dissipation Derate Linearly From 25°C 120 mW 1.41 mW/°C 50 mA DETECTOR 150 mW 1.76 mW/°C ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS Parameter Test Conditions Symbol Device IF = ±10 mA VF VF = 0 V, f = 1.0 MHz Breakdown Voltage Collector to Emitter Min Typ* Max Unit All 1.17 1.5 V CJ All 80 pF IC = 1.0 mA, IF = 0 BVCEO All 30 100 V Collector to Base IC = 100 µA, IF = 0 BVCBO All 70 120 V Emitter to Base IE = 100 µA, IF = 0 BVEBO All 5 10 V Emitter to Collector IE = 100 µA, IF = 0 BVECO All 7 10 V VCE = 10 V, IF = 0 ICEO Collector to Emitter VCE = 0, f = 1 MHz Collector to Base Emitter to Base EMITTER Input Forward Voltage Capacitance DETECTOR Leakage Current Collector to Emitter H11AA1,3,4(-M) 1 50 H11AA2-M 1 200 CCE All 10 pF VCB = 0, f = 1 MHz CCB All 80 pF VEB = 0, f = 1 MHz CEB All 15 pF nA Capacitance *Typical values at TA = 25°C © 2004 Fairchild Semiconductor Corporation Page 2 of 9 1/9/04 AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M H11AA4-M TRANSFER CHARACTERISTICS (TA = 25°C Unless otherwise specified.) Characteristics Current Transfer Ratio, Collector to Emitter Current Transfer Ratio, Symmetry Saturation Voltage Collector to Emitter Test Conditions Symbol IF = ±10 mA, VCE = 10 V CTRCE IF = ±10 mA, VCE = 10 V (Figure 11) IF = ±10 mA, ICE = 0.5 mA Device Min H11AA4-M 100 H11AA3-M 50 H11AA1-M 20 H11AA2-M 10 All .33 Typ* Max Units % 3.0 VCE(SAT) All .40 V Test Conditions Symbol Min Package Capacitance input/output VI-O = 0, f = 1 MHz CI-O Isolation Voltage f = 60 Hz, t = 1 sec. VISO 7500 Vac(pk) VI-O = 500 VDC RISO 1011 Ω ISOLATION CHARACTERISTICS Characteristic Isolation Resistance Typ* 0.7 Max Units pF *Typical values at TA = 25°C © 2004 Fairchild Semiconductor Corporation Page 3 of 9 1/9/04 AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M Fig. 2 Normalized CTR vs. Forward Current Fig. 1 Input Voltage vs. Input Current 100 1.4 TA = 25°C TA = 25°C VCE = 5V 80 1.2 Normalized to IF = 10mA 60 1.0 40 NORMALIZED CTR I F - INPUT CURRENT (mA) H11AA4-M 20 0 -20 -40 0.8 0.6 0.4 -60 0.2 -80 0.0 -100 -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 0 2.0 5 20 1.0 NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) VCE = 5V Normalized to IF = 10mA, TA = 25°C 1.2 IF = 10mA NORMALIZED CTR 15 Fig. 4 CTR vs. RBE (Unsaturated) Fig. 3 Normalized CTR vs. Ambient Temperature 1.4 1.0 IF = 5mA 0.8 IF = 20mA 0.6 0.4 0.2 -60 -40 -20 0 20 40 60 80 V 0.9 CE = 5V TA = 25°C 0.8 0.7 IF = 20mA 0.6 IF = 10mA 0.5 IF = 5mA 0.4 0.3 0.2 0.1 0.0 100 10 100 1.0 V CE = 0.3V TA = 25°C 0.8 0.7 IF = 20mA 0.6 IF = 10mA 0.5 IF = 5mA 0.4 0.3 0.2 0.1 0.0 10 100 RBE- BASE RESISTANCE (k Ω) © 2004 Fairchild Semiconductor Corporation 1000 VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) Fig. 6 Collector-Emitter Saturation Voltage vs Collector Current Fig. 5 CTR vs. RBE (Saturated) 0.9 1000 RBE - BASE RESISTANCE (kΩ) TA - AMBIENT TEMPERATURE (°C) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 10 IF - FORWARD CURRENT (mA) VF - INPUT VOLTAGE (V) 100 T = 25°C A 10 1 IF = 2.5mA IF = 5mA 0.1 IF = 10mA 0.01 0.001 0.01 Page 4 of 9 0.1 IF = 20mA 1 10 IC - COLLECTOR CURRENT (mA) 1/9/04 AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M Fig. 7 Switching Speed vs. Load Resistor Fig. 8 Normalized ton vs. RBE 1000 7 SWITCHING SPEED - (µs) A 100 Toff Tf 10 Ton Tr 1 VCC = 10V IC = 2mA RL = 100Ω T = 25°C 6 NORMALIZED ton - (ton(RBE) / ton(open)) IF = 10mA VCC = 10V T = 25°C A 5 4 3 2 1 0 0.1 0.1 1 10 10 100 100 1000 10000 100000 RBE- BASE RESISTANCE (k Ω) R-LOAD RESISTOR (kΩ) Fig. 10 Dark Current vs. Ambient Temperature Fig. 9 Normalized toff vs. RBE 10000 3.0 VCC = 10V IC = 2mA RL = 100Ω T = 25°C 2.5 ICEO - COLLECTOR -EMITTER DARK CURRENT (nA) NORMALIZED toff - (toff(RBE) / toff(open)) H11AA4-M A 2.0 1.5 1.0 0.5 1000 100 VCE = 10V VCE = 30V 10 1 0.1 0.0 10 100 1000 10000 0 100000 20 40 60 80 100 TA - AMBIENT TEMPERATURE (°C) RBE- BASE RESISTANCE (kΩ) Fig. 11 Output Symmetry Characteristics 10 NORMALIZED OUTPUT CURRENT 5 1 IF = I - 10mA I IF = I 10mA I .5 NORMALIZED TO: VCE = 10 V IF = 10 mA .1 .05 THE MAXIMUM PEAK OUTPUT CURRENT WILL BE NO MORE THAN THREE TIMES THE MINIMUM PEAK OUTPUT CURRENT AT IF = ±10 mA .01 .005 .01 .05 .1 .5 1 5 10 VCE - COLLECTOR TO EMITTER VOLTAGE (V) © 2004 Fairchild Semiconductor Corporation Page 5 of 9 1/9/04 AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M Package Dimensions (Through Hole) H11AA4-M Package Dimensions (Surface Mount) 0.350 (8.89) 0.320 (8.13) 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.070 (1.77) 0.040 (1.02) 0.260 (6.60) 0.240 (6.10) 0.390 (9.90) 0.332 (8.43) 0.070 (1.77) 0.040 (1.02) 0.320 (8.13) 0.014 (0.36) 0.010 (0.25) 0.320 (8.13) 0.014 (0.36) 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.200 (5.08) 0.115 (2.93) 0.100 (2.54) 0.015 (0.38) 0.012 (0.30) 0.008 (0.20) 0.025 (0.63) 0.020 (0.51) 0.020 (0.50) 0.016 (0.41) 0.100 (2.54) 0.100 [2.54] 15° 0.035 (0.88) 0.006 (0.16) 0.020 (0.50) 0.016 (0.41) 0.012 (0.30) Package Dimensions (0.4” Lead Spacing) Recommended Pad Layout for Surface Mount Leadform 0.350 (8.89) 0.320 (8.13) 0.070 (1.78) 0.260 (6.60) 0.240 (6.10) 0.060 (1.52) 0.070 (1.77) 0.040 (1.02) 0.014 (0.36) 0.010 (0.25) 0.425 (10.79) 0.100 (2.54) 0.305 (7.75) 0.200 (5.08) 0.115 (2.93) 0.030 (0.76) 0.100 (2.54) 0.015 (0.38) 0.020 (0.50) 0.016 (0.41) 0.100 [2.54] 0.012 (0.30) 0.008 (0.21) 0.425 (10.80) 0.400 (10.16) NOTE All dimensions are in inches (millimeters) © 2004 Fairchild Semiconductor Corporation Page 6 of 9 1/9/04 AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M H11AA4-M ORDERING INFORMATION Option/Order Entry Identifier Description S Surface Mount Lead Bend SR2 Surface Mount; Tape and Reel T 0.4" Lead Spacing V VDE 0884 TV VDE 0884, 0.4" Lead Spacing SV VDE 0884, Surface Mount SR2V VDE 0884, Surface Mount, Tape & Reel MARKING INFORMATION 1 V 3 H11AA1 2 X YY Q 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code, e.g., ‘3’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code *Note – Parts that do not have the ‘V’ option (see definition 3 above) that are marked with date code ‘325’ or earlier are marked in portrait format. © 2004 Fairchild Semiconductor Corporation Page 7 of 9 1/9/04 AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M H11AA4-M Carrier Tape Specifications 12.0 ± 0.1 4.5 ± 0.20 2.0 ± 0.05 4.0 ± 0.1 0.30 ± 0.05 Ø1.5 MIN 1.75 ± 0.10 11.5 ± 1.0 21.0 ± 0.1 9.1 ± 0.20 10.1 ± 0.20 0.1 MAX 24.0 ± 0.3 Ø1.5 ± 0.1/-0 User Direction of Feed NOTE All dimensions are in inches (millimeters) Reflow Profile (White Package, -M Suffix) Temperature (°C) 300 230°C, 10–30 s 250 245°C peak 200 150 Time above 183°C, 120–180 sec 100 Ramp up = 2–10°C/sec 50 • Peak reflow temperature: 245°C (package surface temperature) • Time of temperature higher than 183°C for 120–180 seconds • One time soldering reflow is recommended 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) © 2004 Fairchild Semiconductor Corporation Page 8 of 9 1/9/04 AC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS H11AA1-M H11AA2-M H11AA3-M H11AA4-M DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2004 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 9 of 9 1/9/04 WWW.ALLDATASHEET.COM Copyright © Each Manufacturing Company. All Datasheets cannot be modified without permission. This datasheet has been download from : www.AllDataSheet.com 100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www.AllDataSheet.com