6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Features: • High data rate, 1MHz typical (NRZ) • Free from latch up and oscilliation throughout voltage and temperature ranges. • Microprocessor compatible drive • Logic compatible output sinks 16mA at 0.4V maximum • Guaranteed on/off threshold hysteresis • Wide supply voltage capability, compatible with all popular logic systems • High isolation voltage between input and output (Viso=5000 V rms ) • Compact dual-in-line package • Pb free and RoHS compliant. • UL approved (No. E214129) • VDE approval (No.132249 ) • SEMKO approved • NEMKO approved • DEMKO approved • FIMKO approved • CSA approved (No. 2007798) Description Schematic The H11LX series of devices each consist of a GaAs infrared emitting diode optically coupled a high speed integrated circuit detector. The output detector incorporates a Schmitt trigger, which provides hysteresis for noise immunity and pulse shaping. The devices are in a 6-pin DIP package and available in wide-lead spacing and SMD option. Applications z z z z z z 1. Anode 2. Cathode 3. No Connection 4. VO 5. GND 6. VCC Logic to logic isolator Programmable current level sensor Line receiver － eliminate noise and transient problems AC to TTL conversion － square wave shaping Digital programming of power supplies Interfaces computers with peripherals Truth Table Everlight Electronics Co., Ltd. Document No：DPC-0000022 1 Rev. 1 Input Output H L L H http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Rating Unit Forward current IF 60 mA Reverse voltage VR 6 V Power dissipation PD 120 mW V45 Allowed Range Vo 0 to 16 V V65 Allowed Range VCC 3 to 16 V Output Current I0 50 mA power dissipation PD 150 mW Total power dissipation Ptot 250 mW Isolation voltage *1 Viso 5000 V rms Operating temperature Topr -55~+100 °C Storage temperature Tstg -55~+150 °C Soldering temperature *2 Tsol 260 °C Input Output Notes *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 & 3 are shorted together, and pins 4, 5 & 6 are shorted together. *2 For 10 seconds. Everlight Electronics Co., Ltd. Document No：DPC-0000022 2 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Electrical Characteristics (Ta=25°C unless specified otherwise) Input Parameter Symbol Min. Typ.* Max. Unit Condition Forward voltage VF - 1.15 1.5 V IF = 10mA Reverse Leakage current IR - - 10 µA VR = 5V Capacitance CJ - - 100 pF V=0, f=1MHz Symbol Min. Typ.* Max. Unit VCC 3 - 15 V ICC(off) - 1.6 5 mA IF=0mA, Vcc=5V Output Current, High IOH - - 100 µA IF=0mA, Vcc=Vo=15V Isolation Resistance RISO 1011 - - Ω VI-O=500VDC Symbol Min. Typ.* Max. Unit Condition ICC(on) - 1.6 5 mA IF=10mA, Vcc=5V VOL - - 0.4 V Output Parameter Operation Voltage Range Supply Current Condition Transfer Characteristics Parameter Supply Current Output Voltage .low H11L1 Turn on Threshold H11L2 Current 1 H11L3 - - 1.6 IFon - - 10 Turn off Threshold Current IFoff - 1 - IFon/IFoff 0.5 - 0.9 Turn on Time ton - - 4 μS Fall Time tr - 0.1 - μS Turn off Time toff - - 4 μS Rise Time tr - 0.1 - μS - 1 - MHz Hysteresis Ratio Data Rate Vcc=5V, IF=IFon(max.), RL=270Ω mA Vcc=5V, RL=270Ω mA Vcc=5V, RL=270Ω 5 Vcc=5V, RL=270Ω Vcc=5V, IF=IFon, RL=270Ω * Typical values at Ta = 25°C 1 . Max. IF(ON) is the maximum current required to trigger the output. For examples, a 1.6mA maximum trigger current would require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA. Everlight Electronics Co., Ltd. Document No：DPC-0000022 3 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Typical Performance Curves Everlight Electronics Co., Ltd. Document No：DPC-0000022 4 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Figure. 7 Switching test circuit and waveform Order Information Part Number H11LXY(Z)-V Note X = Part No. for 1, 2 or 3 Y = Lead form option (S, S1, M or none) Z = Tape and reel option (TA, TB or none). V = VDE (optional) Option Description Packing quantity None Standard DIP-6 65 units per tube M Wide lead bend (0.4 inch spacing) 65 units per tube S + TA Surface mount lead form + TA tape & reel option 1000 units per reel S + TB Surface mount lead form + TB tape & reel option 1000 units per reel S1 + TA Surface mount lead form (low profile) + TA tape & reel option 1000 units per reel S1 + TB Surface mount lead form (low profile) + TB tape & reel option 1000 units per reel Everlight Electronics Co., Ltd. Document No：DPC-0000022 5 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Package Drawings (Dimensions in mm) Standard DIP Type Option M Type Everlight Electronics Co., Ltd. Document No：DPC-0000022 6 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Option S Type Option S1 Type Everlight Electronics Co., Ltd. Document No：DPC-0000022 7 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Recommended pad layout for surface mount leadform Device Marking EL H11L3 YW W V Notes EL H11L3 Y WW V denotes Everlight denotes Device Number denotes 1 digit Year code denotes 2 digit Week code denotes VDE (optional) Everlight Electronics Co., Ltd. Document No：DPC-0000022 8 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Tape & Reel Packing Specifications Option TA Option TB Direction of feed from reel Direction of feed from reel Tape dimensions Dimension No. A B Do D1 E F Dimension (mm) 10.4±0.1 7.52±0.1 1.5±0.1 1.5+0.1/-0 1.75±0.1 7.5±0.1 Dimension No. Po P1 P2 t W K Dimension (mm) 4.0±0.15 1.6±0.1 2.0±0.1 0.35±0.03 16.0±0.2 4.5±0.1 Everlight Electronics Co., Ltd. Document No：DPC-0000022 9 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series Solder Reflow Temperature Profile Temperature 260 °C (peak) >255 °C (30s Max) 217°C 1-3 °C/Sec Max 200°C 60 – 140 Sec 150°C 70 – 170 Sec 1-3 °C/Sec Max TIME (S) Everlight Electronics Co., Ltd. Document No：DPC-0000022 10 Rev. 1 http://www.everlight.com January 7, 2009 6 PIN DIP PHOTO COUPLER Schmitt Trigger H11Lx Series DISCLAIMER 1. The specifications in this datasheet may be changed without notice. EVERLIGHT reserves the authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for use as outlined in this datasheet. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in this datasheet. 3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without the specific consent of EVERLIGHT. Everlight Electronics Co., Ltd. Document No：DPC-0000022 11 Rev. 1 http://www.everlight.com January 7, 2009