Freescale Semiconductor, Inc. Addendum HC908JL8AD/D Rev. 0, 5/2002 Freescale Semiconductor, Inc... Addendum to MC68HC908JL8 Technical Data This addendum provides update and additional information to the MC68HC908JL8 Technical Data, Rev. 2 (Motorola document number MC68HC908JL8/D) MC68HC08JL8 MC68HC08JK8 The MC68HC08JL8 is the ROM part equivalent to the MC68HC908JL8. The entire MC68HC908JL8 data book apply to this ROM device, with exceptions outlined in this addendum. Table 1. Summary of MC68HC08JL8 and MC68HC908JL8 Differences MC68HC08JL8 MC68HC908JL8 Memory ($DC00–$FBFF) 8,192 bytes ROM 8,192 bytes FLASH User vectors ($FFDC–$FFFF) 36 bytes ROM 36 bytes FLASH Registers at $FE08 and $FFCF Not used; locations are reserved. FLASH related registers. $FE08 — FLCR $FFCF — FLBPR Mask option register ($FFD0) Defined by mask; read only. Read/write FLASH register. Monitor ROM ($FC00–$FDFF and $FE10–$FFCE) $FC00–$FDFF: Not used. $FE10–$FFCE: Used for testing purposes only. Used for testing and FLASH programming/erasing. Available Packages 20-pin PDIP (MC68HC08JK8) 20-pin SOIC (MC68HC08JK8) 28-pin PDIP 28-pin SOIC 32-pin SDIP 32-pin LQFP 20-pin PDIP (MC68HC908JK8) 20-pin SOIC (MC68HC908JK8) 28-pin PDIP 28-pin SOIC 32-pin SDIP 32-pin LQFP © Motorola, Inc., 2003 For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908JL8AD/D MCU Block Diagram Figure 1 shows the block diagram of the MC68HC08JL8. Memory Map The MC68HC08JL8 has 8,192 bytes of user ROM from $DC00 to $FBFF, and 36 bytes of user ROM vectors from $FFDC to $FFFF. On the MC68HC908JL8, these memory locations are FLASH memory. Figure 2 shows the memory map of the MC68HC08JL8. INTERNAL BUS USER ROM — 8,192 BYTES PORTA CONTROL AND STATUS REGISTERS — 64 BYTES PTA7/KBI7**‡ PTA6/KBI6**¥ PTA5/KBI5**‡ PTA4/KBI4**‡ PTA3/KBI3**‡ PTA2/KBI2**‡ PTA1/KBI1**‡ PTA0/KBI0**‡ PORTB ARITHMETIC/LOGIC UNIT (ALU) PTB7/ADC7 PTB6/ADC6 PTB5/ADC5 PTB4/ADC4 PTB3/ADC3 PTB2/ADC2 PTB1/ADC1 PTB0/ADC0 KEYBOARD INTERRUPT MODULE 8-BIT ANALOG-TO-DIGITAL CONVERTER MODULE DDRA CPU REGISTERS 2-CHANNEL TIMER INTERFACE MODULE 1 2-CHANNEL TIMER INTERFACE MODULE 2 MONITOR ROM — 447 BYTES BREAK MODULE USER ROM VECTORS — 36 BYTES RC OSCILLATOR INTERNAL OSCILLATOR POWER-ON RESET MODULE * RST SYSTEM INTEGRATION MODULE LOW-VOLTAGE INHIBIT MODULE * IRQ EXTERNAL INTERRUPT MODULE VDD POWER VSS ADC REFERENCE COMPUTER OPERATING PROPERLY MODULE PORTD OSC2/RCCLK ADC12/T2CLK SERIAL COMMUNICATIONS INTERFACE MODULE PTE ¥ CRYSTAL OSCILLATOR DDRD OSC1 DDRB USER RAM — 256 BYTES DDRE Freescale Semiconductor, Inc... M68HC08 CPU PTD7/RxD**†‡ PTD6/TxD**†‡ PTD5/T1CH1 PTD4/T1CH0 PTD3/ADC8‡ PTD2/ADC9‡ PTD1/ADC10 PTD0/ADC11 # ## # ## PTE1/T2CH1 # PTE0/T2CH0 * Pin contains integrated pull-up device. ** Pin contains programmable pull-up device. † 25mA open-drain if output pin. ‡ LED direct sink pin. ¥ Shared pin: OSC2/RCCLK/PTA6/KBI6. # Pins available on 32-pin packages only. ## Pins available on 28-pin and 32-pin packages only. Shaded blocks indicate differences to MC68HC908JL8 Figure 1. MC68HC08JL8 Block Diagram 2 Addendum to MC68HC908JL8 Technical Data For More Information On This Product, Go to: www.freescale.com MOTOROLA Freescale Semiconductor, Inc. Freescale Semiconductor, Inc... HC908JL8AD/D MC68HC08JL8 MC68HC08JK8 $0000 ↓ $003F I/O REGISTERS 64 BYTES $0040 ↓ $005F RESERVED 32 BYTES $0060 ↓ $015F RAM 256 BYTES $0160 ↓ $DBFF UNIMPLEMENTED 55,968 BYTES $DC00 ↓ $FBFF ROM 8,192 BYTES $FC00 ↓ $FDFF UNIMPLEMENTED 512 BYTES $FE00 BREAK STATUS REGISTER (BSR) $FE01 RESET STATUS REGISTER (RSR) $FE02 RESERVED $FE03 BREAK FLAG CONTROL REGISTER (BFCR) $FE04 INTERRUPT STATUS REGISTER 1 (INT1) $FE05 INTERRUPT STATUS REGISTER 2 (INT2) $FE06 INTERRUPT STATUS REGISTER 3 (INT3) $FE07 RESERVED $FE08 RESERVED $FE09 ↓ $FF0B RESERVED $FE0C BREAK ADDRESS HIGH REGISTER (BRKH) $FE0D BREAK ADDRESS LOW REGISTER (BRKL) $FE0E BREAK STATUS AND CONTROL REGISTER (BRKSCR) $FE0F RESERVED $FE10 ↓ $FFCE MONITOR ROM 447 BYTES $FFCF RESERVED $FFD0 MASK OPTION REGISTER (MOR) — READ ONLY $FFD1 ↓ $FFDB RESERVED 11 BYTES $FFDC ↓ $FFFF USER ROM VECTORS 36 BYTES Figure 2. MC68HC08JL8 Memory Map MOTOROLA Addendum to MC68HC908JL8 Technical Data For More Information On This Product, Go to: www.freescale.com 3 Freescale Semiconductor, Inc. HC908JL8AD/D Reserved Registers The two registers at $FE08 and $FFCF are reserved locations on the MC68HC08JL8. On the MC68HC908JL8, these two locations are the FLASH control register and the FLASH block protect register respectively. Mask Option Register The mask option register at $FFD0 is read only. The value is defined by mask option (hard-wired connections) specified at the time as the ROM code submission. Freescale Semiconductor, Inc... On the MC68HC908JL8, the MOR is implemented as a FLASH, which can be programmed, erased, and read. Monitor ROM The monitor program (monitor ROM: $FE10–$FFCE) on the MC68HC08JL8 is for device testing only. $FC00–$FDFF are unused. Electrical Specifications Electrical specifications for the MC68HC908JL8 apply to the MC68HC08JL8, except for the parameters indicated below. DC Electrical Characteristics Table 2. DC Electrical Characteristics (5V) Characteristic(1) Symbol VDD supply current, fOP = 8MHz RC oscillator option IDD Typ(2) Min Max Unit Values same as, and characterized from MC68HC908JL8, but not tested. Low-voltage inhibit, trip falling voltage VTRIPF 3.55 (3.60)(3) 4.02 (4.25) 4.48 (4.48) V Low-voltage inhibit, trip rising voltage VTRIPR 3.66 (3.75) 4.13 (4.40) 4.59 (4.63) V Max Unit 1. VDD = 4.5 to 5.5 Vdc, VSS = 0 Vdc, TA = TL to TH, unless otherwise noted. 2. Typical values reflect average measurements at midpoint of voltage range, 25 °C only. 3. The numbers in parenthesis are MC68HC908JL8 values. Table 3. DC Electrical Characteristics (3V) Characteristic(1) Symbol VDD supply current, fOP = 4MHz RC oscillator option IDD Low-voltage inhibit, trip voltage (No hysteresis implemented for 3V LVI) VLVI3 Typ(2) Min Values same as, and characterized from MC68HC908JL8, but not tested. 2.1 (2.18)(3) 2.4 (2.49) 2.69 (2.68) V 1. VDD = 2.7 to 3.3 Vdc, VSS = 0 Vdc, TA = TL to TH, unless otherwise noted. 2. Typical values reflect average measurements at midpoint of voltage range, 25 °C only. 3. The numbers in parenthesis are MC68HC908JL8 values. 4 Addendum to MC68HC908JL8 Technical Data For More Information On This Product, Go to: www.freescale.com MOTOROLA Freescale Semiconductor, Inc. HC908JL8AD/D MC68HC08JL8 MC68HC08JK8 RC frequency, fRCCLK (MHz) 12 CEXT = 10 pF 10 MCU 5V @ 25 °C OSC1 8 6 VDD 4 REXT CEXT MC68HC908JL8 MC68HC08JL8 2 0 0 10 20 30 Resistor, REXT (kΩ) 40 50 Figure 3. RC vs. Frequency (5V @25 °C) 14 RC frequency, fRCCLK (MHz) Freescale Semiconductor, Inc... 14 12 CEXT = 10 pF 10 MCU 3V @ 25 °C OSC1 8 6 VDD REXT 4 CEXT MC68HC908JL8 MC68HC08JL8 2 0 0 10 20 30 Resistor, REXT (kΩ) 40 50 Figure 4. RC vs. Frequency (3V @25 °C) Memory Characteristics Table 4. Memory Characteristics Characteristic RAM data retention voltage Symbol Min Max Unit VRDR 1.3 — V Notes: Since MC68HC08JL8 is a ROM device, FLASH memory electrical characteristics do not apply. MOTOROLA Addendum to MC68HC908JL8 Technical Data For More Information On This Product, Go to: www.freescale.com 5 Freescale Semiconductor, Inc. HC908JL8AD/D MC68HC08JL8 Order Numbers These part numbers are generic numbers only. To place an order, ROM code must be submitted to the ROM Processing Center (RPC). Table 5. MC68HC08JL8 Order Numbers Freescale Semiconductor, Inc... MC Order Number Operating Temperature Range MC68HC08JK8CP –40 °C to +85 °C MC68HC08JK8MP –40 °C to +125 °C MC68HC08JK8CDW –40 °C to +85 °C MC68HC08JK8MDW –40 °C to +125 °C MC68HC08JL8CP –40 °C to +85 °C MC68HC08JL8MP –40 °C to +125 °C MC68HC08JL8CDW –40 °C to +85 °C MC68HC08JL8MDW –40 °C to +125 °C MC68HC08JL8CSP –40 °C to +85 °C MC68HC08JL8MSP –40 °C to +125 °C MC68HC08JL8CFA –40 °C to +85 °C MC68HC08JL8MFA –40 °C to +125 °C Package 20-pin PDIP 20-pin SOIC 28-pin PDIP 28-pin SOIC 32-pin SDIP 32-pin LQFP NOTE: Temperature grade "M" is available for VDD = 5V only. 6 Addendum to MC68HC908JL8 Technical Data For More Information On This Product, Go to: www.freescale.com MOTOROLA Freescale Semiconductor, Inc. HC908JL8AD/D AMENDMENTS TO MC68HC908JL8/D, REV. 2 AMENDMENTS TO MC68HC908JL8/D, REV. 2 Keyboard Interrupt Page 243, Figure 15-2. Keyboard Interrupt Block Diagram — Replace with the following block diagram: INTERNAL BUS Freescale Semiconductor, Inc... NOTE: To prevent false interrupts, user should use software to debounce keyboard interrupt inputs. KBI0 ACKK VDD VECTOR FETCH DECODER KEYF RESET . KBIE0 D CLR Q SYNCHRONIZER . CK TO PULLUP ENABLE . KEYBOARD INTERRUPT FF KBI7 KEYBOARD INTERRUPT REQUEST IMASKK MODEK KBIE7 TO PULLUP ENABLE Computer Operating Properly (COP) From: Page 254, 16.8.2 Stop Mode — Replace the two paragraphs: Stop mode turns off the ICLK input to the COP if the STOP_ICLKDIS bit is set in configuration register 2 (CONFIG2). Service the COP immediately before entering or after exiting stop mode to ensure a full COP timeout period after entering or exiting stop mode. After reset, the STOP_ICLKDIS bit is clear by default and ICLK is enabled during stop mode. To: Stop mode turns off the ICLK input to the COP and clears the COP prescaler. Service the COP immediately before entering or after exiting stop mode to ensure a full COP timeout period after entering or exiting stop mode. To prevent inadvertently turning off the COP with a STOP instruction, a configuration option is available that disables the STOP instruction. When the STOP bit in the configuration register has the STOP instruction is disabled, execution of a STOP instruction results in an illegal opcode reset. MOTOROLA Addendum to MC68HC908JL8 Technical Data For More Information On This Product, Go to: www.freescale.com 7 Freescale Semiconductor, Inc. HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution P.O. Box 5405, Denver, Colorado 80217 1-800-521-6274 or 480-768-2130 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center 3-20-1, Minami-Azabu Minato-ku, Tokyo 106-8573 Japan 81-3-3440-3569 Freescale Semiconductor, Inc... ASIA/PACIFIC: Information in this document is provided solely to enable system and software Motorola Semiconductors H.K. Ltd. Silicon Harbour Centre, 2 Dai King Street Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 HOME PAGE: http://motorola.com/semiconductors implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. digital dna is a trademark of Motorola, Inc. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. © Motorola, Inc. 2003 HC908JL8AD/D Rev. 0 5/2003 For More Information On This Product, Go to: www.freescale.com