STMICROELECTRONICS HCF40106BM1

HCC40106B
HCF40106B
HEX SCHMITT TRIGGERS
.
.
..
.
.
.
..
..
SCHMITT-TRIGGER ACTION WITH NO EXTERNAL COMPONENTS
HYSTERESIS VOLTAGE (TYP.) 0.9V AT VDD =
5V, 2.3V AT VDD = 10V AND 3.5V AT VDD = 15V
NOISE IMMUNITY GREATER THAN 50%
NO LIMIT ON INPUT RISE AND FALL TIME
LOW VDD TO VSS CURRENT DURING SLOW
INPUT RAMP
STANDARDIZED SYMMETRICAL OUTPUT
CHARACTERISTICS
QUIESCENT CURRENT SPECIFIED AT 20V
FOR HCC DEVICE
5V, 10V, AND 15V PARAMETRIC RATINGS
INPUT CURRENT OF 100nA AT 18V AND 25°C
FOR HCC DEVICE
100% TESTED FOR QUIESCENT CURRENT
MEETS ALL REQUIREMENTS OF JEDEC
TENTATIVE STANDARD N° 13A, ”STANDARD
SPECIFICATIONS FOR DESCRIPTION OF ”B”
SERIES CMOS DEVICES”
EY
(Plastic Package)
M1
(Micro Package)
F
(Ceramic Frit Seal Package)
C1
(Plastic Chip Carrier)
ORDER CODES :
HCC40106BF
HCF40106BM1
HCF40106BEY HCF40106BC1
PIN CONNECTIONS
DESCRIPTION
The HCC40106B (extended temperature range)
and HCF40106B (intermediate temperature range)
are monolithic integrated circuits, available in 14lead dual in-line plastic or ceramic package and
plastic micropackage.
The HCC/HCF40106B consists of six Schmitt-trigger circuits. Each circuit functions as an inverter with
Schmitt-trigger action on the input. The trigger switches at different points for positive and negativegoing signals. The difference between the
positive-going voltage (VP) and the negative-going
voltage (VN) is defined as hysteresis voltage (VH).
June 1989
1/13
HCC/HCF40106B
FUNCTIONAL DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Symbol
V DD *
Parameter
Supply Voltage : HC C Types
H C F Types
Value
Unit
– 0.5 to + 20
– 0.5 to + 18
V
V
Vi
Input Voltage
– 0.5 to V DD + 0.5
V
II
DC Input Current (any one input)
± 10
mA
Total Power Dissipation (per package)
Dissipation per Output Transistor
for T o p = Full Package-temperature Range
200
mW
100
mW
Pto t
T op
Operating Temperature : HCC Types
H CF Types
– 55 to + 125
– 40 to + 85
°C
°C
T stg
Storage Temperature
– 65 to + 150
°C
Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability.
* All voltage values are referred to VSS pin voltage.
RECOMMENDED OPERATING CONDITIONS
Symbol
V DD
VI
Top
2/13
Parameter
Supply Voltage : H CC Types
H C F Types
Input Voltage
Operating Temperature : HCC Types
H CF Types
Value
Unit
3 to 18
3 to 15
V
V
0 to V DD
V
– 55 to + 125
– 40 to + 85
°C
°C
HCC/HCF40106B
LOGIC DIAGRAM
STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions)
Test Conditions
Symbol
IL
V OH
V OL
VP
VN
VH
Parameter
Quiescent
Current
VI
(V)
VO
(V)
Value
|I O | V D D
T L o w*
25 °C
T Hi g h *
(µA) (V) Min. Max. Min. Typ. Max. Min. Max.
0/ 5
HCC 0/10
Types
0/15
5
1
0.02
1
30
10
2
0.02
2
60
15
4
0.02
4
120
0/20
20
20
0.04
20
600
0/ 5
HCF
Types 0/10
0/15
5
4
0.02
4
30
10
8
0.02
8
60
15
16
0.02
16
120
Output High
Voltage
Output Low
Voltage
0/ 5
<1
5
4.95
4.95
4.95
0/10
<1
10
9.95
9.95
9.95
14.95
14.95
0/15
<1
15
<1
5
0.05
0.05
0.05
10/0
<1
10
0.05
0.05
0.05
15/0
<1
15
14.95
0.05
0.05
2.9
3.6
V
0.05
Positive Trigger
Threshold
Voltage
5
2.2
10
4.6
7.1
4.6
5.9
7.1
4.6
7.1
15
6.8
10.8
6.8
8.8
10.8
6.8
10.8
Negative Trigger
Threshold
Voltage
5
0.9
2.8
0.9
1.9
2.8
0.9
2.8
10
2.5
5.2
2.5
3.9
5.2
2.5
5.2
15
4
7.4
4
5.8
7.4
4
7.4
Hysteresis
Voltage
2.2
µA
V
5/10
3.6
Unit
2.2
3.6
5
0.3
1.6
0.3
0.9
1.6
0.3
1.6
10
1.2
3.4
1.2
2.3
3.4
1.2
3.4
15
1.6
5
1.6
3.5
5
1.6
V
V
V
* TLow= – 55°C for HCC device : – 40°C for HCF device.
* THigh= + 125°C for HCC device : + 85°C for HCF device.
3/13
HCC/HCF40106B
STATIC ELECTRICAL CHARACTERISTICS (continued)
Test Conditions
Symbol
I OH
I OL
Parameter
Output
Drive
Current
VO
(V)
|I O | V D D
T L o w*
25 °C
T Hi g h *
(µA) (V) Min. Max. Min. Typ. Max. Min. Max.
0/ 5
HCC 0/ 5
Types
0/10
2.5
5
– 2
– 1.6 – 3.2
– 1.15
4.6
5
– 0.64
– 0.51 – 1
– 0.36
9.5
10
– 1.6
– 1.3 – 2.6
– 0.9
0/15
13.5
15
– 4.2
– 3.4 – 6.8
– 2.4
0/ 5
2.5
5
– 1.53
– 1.36 – 3.2
– 1.1
0/ 5
HCF
Types 0/10
4.6
5
– 0.52
– 0.44 – 1
– 0.36
9.5
10
– 1.3
– 1.1 – 2.6
– 0.9
0/15
13.5
15
– 3.6
– 3.0 – 6.8
– 2.4
Output Sink
0/ 5
HCC
Current
Types 0/10
0/15
0.4
5
0.64
0.51
1
0.36
0.5
10
1.6
1.3
2.6
0.9
1.6
15
4.2
3.4
6.8
2.4
0/ 5
HCF
Types 0/10
0/15
0.4
5
0.52
0.44
1
0.36
0.5
10
1.3
1.1
2.6
0.9
1.5
15
3.6
3.0
6.8
2.9
I IH , I IL ** Input
Leakage
Current
CI
VI
(V)
Value
HCC 0/18
Types
Input Capacitance
mA
mA
18
± 0.1
±10 – 5 ± 0.1
± 1
15
± 0.3
±10 – 5 ± 0.3
± 1
µA
Any Input
HCF 0/15
Types
Unit
Any Input
5
7.5
p
* TLow = – 55°C for HCC device : – 40°C for HCF device.
* THigh = + 125°C for HCC device : + 85°C for HCF device.
DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, CL = 50pF, R L = 200kΩ,
typical temperature coefficient for all VD D values is 0.3%/°C, all input rise and fall time = 20ns)
Symbol
Parameter
t PL H ,
t PHL
Propagation Delay Time
t T HL ,
tTLH
Transition Time
4/13
Test Conditions
Value
V D D (V) Min.
Typ.
Max.
5
140
280
10
70
140
15
60
120
5
100
200
10
50
100
15
40
80
Unit
ns
ns
HCC/HCF40106B
HYSTERESIS DEFINITION, CHARACTERISTICS AND TEST SETUP
(a) Definition of VP, VN and VH.
(b) Transfer Characteristic of 1 of 6 gates.
(c) Test Setup.
Input and Output Characteristics.
Typical Current Voltage Transfer Characteristics, and Test Circuit.
5/13
HCC/HCF40106B
HYSTERESIS DEFINITION, CHARACTERISTICS AND TEST SETUP
Typical Voltage Transfer Characteristics vs. Temperature, and Test Circuit.
Typical Transition Time vs. Load Capacitance.
Output Low (sink) Current Characteristics.
Output High (source) Current Characteristics.
Typical Propagation Delay Time vs. Load Capacitance.
6/13
HCC/HCF40106B
Typical Trigger Threshold Voltage vs. Supply
Voltage .
Typical per Cent Hysteresis vs. Supply Voltage.
Typical Power Dissipation per Trigger vs. Input
Frequency.
Typical Power Dissipation per Trigger vs. Input
Frequency.
TYPICAL APPLICATIONS
ASTABLE MULTIVIBRATOR.
MONOSTABLE MULTIVIBRATOR.
7/13
HCC/HCF40106B
TYPICAL APPLICATIONS (continued)
WAVE SHAPER.
TEST CIRCUITS
Quiescent Device Current.
Input Current .
8/13
Dynamic Power Dissipation.
HCC/HCF40106B
Plastic DIP14 MECHANICAL DATA
mm
DIM.
MIN.
a1
0.51
B
1.39
TYP.
inch
MAX.
MIN.
TYP.
MAX.
0.020
1.65
0.055
0.065
b
0.5
0.020
b1
0.25
0.010
D
20
0.787
E
8.5
0.335
e
2.54
0.100
e3
15.24
0.600
F
7.1
0.280
I
5.1
0.201
L
Z
3.3
1.27
0.130
2.54
0.050
0.100
P001A
9/13
HCC/HCF40106B
Ceramic DIP14/1 MECHANICAL DATA
mm
DIM.
MIN.
TYP.
inch
MAX.
MIN.
TYP.
MAX.
A
20
0.787
B
7.0
0.276
D
E
3.3
0.130
0.38
e3
0.015
15.24
0.600
F
2.29
2.79
0.090
0.110
G
0.4
0.55
0.016
0.022
H
1.17
1.52
0.046
0.060
L
0.22
0.31
0.009
0.012
M
1.52
2.54
0.060
0.100
N
P
Q
10.3
7.8
8.05
5.08
0.406
0.307
0.317
0.200
P053C
10/13
HCC/HCF40106B
SO14 MECHANICAL DATA
mm
DIM.
MIN.
TYP.
A
a1
inch
MAX.
MIN.
TYP.
1.75
0.1
0.068
0.2
a2
MAX.
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45° (typ.)
D
8.55
E
5.8
8.75
0.336
6.2
0.228
0.344
0.244
e
1.27
0.050
e3
7.62
0.300
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
S
0.68
0.026
8° (max.)
P013G
11/13
HCC/HCF40106B
PLCC20 MECHANICAL DATA
mm
DIM.
MIN.
TYP.
inch
MAX.
MIN.
TYP.
MAX.
A
9.78
10.03
0.385
0.395
B
8.89
9.04
0.350
0.356
D
4.2
4.57
0.165
0.180
d1
2.54
0.100
d2
0.56
0.022
E
7.37
8.38
0.290
0.330
e
1.27
0.050
e3
5.08
0.200
F
0.38
0.015
G
0.101
0.004
M
1.27
0.050
M1
1.14
0.045
P027A
12/13
HCC/HCF40106B
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No
license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express
written approval of SGS-THOMSON Microelectonics.
 1994 SGS-THOMSON Microelectronics - All Rights Reserved
SGS-THOMSON Microelectronics GROUP OF COMPANIES
Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A
13/13