Agilent HDSP-S6xE, HDSP-S6xG, HDSP-B6xZ Series 32.9 mm (1.3 inch) General Purpose 5 x 8 Dot Matrix Alphanumeric Displays Data Sheet Description These displays have a 32.9 mm (1.3 inch) character height. The devices are available in either common row anode or common row cathode configurations. The displays come in only black face paint and are available in a choice of GaP Red (HER) or GaP Green colors. The Bi-color display consists of HER and green colors. These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of 0.065% for functional and visual/ cosmetic defects. Features • 5 x 8 Dot matrix font • X-Y stackable • Pin-out – 28.3 mm (1.114 in.) Dual-In-Line (DIP) leads on 2.54 mm (0.1 in.) centers • Choice of colors • • • • Devices GaP Red GaP Green HDSPHDSPS61E S61G S66E S66G B61Z B66Z Description 32.9 mm Black Surface Common Row Anode 32.9 mm Black Surface Common Row Cathode 32.9 mm Black Surface Bi-Color Common Row Anode 32.9 mm Black Surface Bi-Color Common Row Cathode Note: 1. For details, please contact your local Agilent components sales office or an authorized distributor. – Single color: red or green – Bi-color: red and green Face paint color: black Design flexibility – Common row anode or common row cathode Categorized for luminous intensity Green categorized for color Applications • Suitable for indoor use • Not recommended for industrial applications, i.e. operating temperature requirements exceeding 85°C or below –35°C • Extreme temperature cycling not recommended[1] Package Dimensions (Single Color) 23.40 (0.921) 0.40 (0.016) 18.40 (0.724) COL 1 2 3 4 5 ROW 1 1.30 (0.051) 2 4.60 (0.181) 37.40 (1.472) 3 4 32.20 (1.268) 5 6 7 ∅3.00 (0.118) 8 1.20 (0.047) 4.60 (0.181) 37.40 (1.472) PART NO. 3.26 ± 0.50 (0.128) 8.00 (0.315) 2.54 (0.10) PIN 1 2.15 (0.085) 0.51 (0.020) 2.54 x 6 = 15.24 (0.1 x 6 = 0.6) TOLERANCE: ± 0.25 mm UNLESS OTHERWISE STATED. 2 28.30 (1.114) 2.20 (0.087) Internal Circuit Diagram Common Row Anode (Single Color) COLUMN PIN 9 2 14 3 8 4 12 3 2 3 3 4 11 4 5 10 6 PIN NO. ROW 1 1 13 5 5 6 1 7 7 8 2 FUNCTION 1 2 ANODE ROW 6 ANODE ROW 8 3 4 CATHODE COLUMN 2 CATHODE COLUMN 3 5 6 ANODE ROW 5 CATHODE COLUMN 5 7 8 9 10 11 12 13 14 ANODE ROW 7 ANODE ROW 3 ANODE ROW 1 CATHODE COLUMN 4 CATHODE COLUMN 3 ANODE ROW 4 CATHODE COLUMN 1 ANODE ROW 2 Internal Circuit Diagram Common Row Cathode (Single Color) COLUMN PIN 9 2 14 3 8 4 12 4 2 3 3 11 4 4 5 10 6 PIN NO. ROW 1 1 13 5 5 6 1 7 7 8 2 FUNCTION 1 2 CATHODE ROW 6 CATHODE ROW 8 3 4 ANODE COLUMN 2 ANODE COLUMN 3 5 6 CATHODE ROW 5 ANODE COLUMN 5 7 8 9 10 11 12 13 14 CATHODE ROW 7 CATHODE ROW 3 CATHODE ROW 1 ANODE COLUMN 4 ANODE COLUMN 3 CATHODE ROW 4 ANODE COLUMN 1 CATHODE ROW 2 Package Dimensions (Bi-Color) 23.40 (0.921) 0.40 (0.016) 18.40 (0.724) COL 1 2 3 4 5 ROW 1 ∅3.00 (0.118) 2 1.30 (0.051) 3 32.20 (1.268) 4 37.40 (1.472) 5 4.60 (0.181) 6 7 8 PIN 1 4.60 (0.181) 1.20 (0.047) 37.40 (1.472) 23.40 (0.921) PART NO. 8.00 (0.315) 2.15 (0.085) ∅0.51 (0.020) 2.20 (0.087) 2.00 (0.079) 2.00 x 8 = 16.00 (0.079 x 8 = 0.630) TOLERANCE: ± 0.25 mm UNLESS OTHERWISE STATED. 5 28.30 (1.114) 3.26 ± 0.50 (0.128) Internal Circuit Diagram Common Row Cathode (Bi-Color) COLUMN 1 2 PIN 3 2 1 16 3 13 ROW 1 18 2 15 3 14 4 17 5 5 6 8 7 6 8 7 PIN NO. 6 1. THE SIGN " " STANDS FOR HER COLOR DICE. 2. THE SIGN " " STANDS FOR GREEN COLOR DICE. CONNECTION 1 2 ANODE COLUMN 1 GREEN ANODE COLUMN 1 RED 3 4 ANODE COLUMN 2 GREEN ANODE COLUMN 3 GREEN 5 6 7 CATHODE ROW 5 CATHODE ROW 7 CATHODE ROW 8 8 9 CATHODE ROW 6 ANODE COLUMN 5 RED 10 11 12 13 14 ANODE COLUMN 5 GREEN ANODE COLUMN 4 GREEN ANODE COLUMN 4 RED ANODE COLUMN 3 RED CATHODE ROW 3 15 16 CATHODE ROW 2 ANODE COLUMN 2 RED 17 18 CATHODE ROW 4 CATHODE ROW 1 4 4 12 5 11 9 10 Internal Circuit Diagram Common Row Anode (Bi-Color) COLUMN 1 2 PIN 3 2 1 16 3 13 ROW 1 18 2 15 3 14 4 17 7 5 5 6 8 7 6 8 7 1. THE SIGN " " STANDS FOR HER COLOR DICE. 2. THE SIGN " " STANDS FOR GREEN COLOR DICE. PIN NO. CONNECTION 1 2 CATHODE COLUMN 1 GREEN CATHODE COLUMN 1 RED 3 4 CATHODE COLUMN 2 GREEN CATHODE COLUMN 3 GREEN 5 6 7 ANODE ROW 5 ANODE ROW 7 ANODE ROW 8 8 9 ANODE ROW 6 CATHODE COLUMN 5 RED 10 11 12 13 14 CATHODE COLUMN 5 GREEN CATHODE COLUMN 4 GREEN CATHODE COLUMN 4 RED CATHODE COLUMN 3 RED ANODE ROW 3 15 16 ANODE ROW 2 CATHODE COLUMN 2 RED 17 18 ANODE ROW 4 ANODE ROW 1 4 4 12 5 11 9 10 Absolute Maximum Ratings at TA = 25˚C Parameter Average Power per Dot[1] Peak Forward Current per Dot[1] (1/8 Duty Cycle at 10 KHz) Average Forward Current per Dot Reverse Voltage per Dot Operating Temperature Storage Temperature Wave Soldering Temperature for 3 seconds[4] (2 mm [0.078 in.] below Body) GaP Red 65 GaP Green 65 Units mW 80 25[1,2] 3 –35 to +85 –35 to +85 100 25[1,3] 3 –35 to +85 –35 to +85 mA mA V °C °C 250 250 °C Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 25°C at 0.20 mA/°C. 3. Derate above 25°C at 0.33 mA/°C. 4. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds. 8 Optical/Electrical Characteristics at TA = 25˚C GaP Red Devices HDSPParameter Luminous Intensity/Dot (Digit Average)[1] S61E S66E B61Z B66Z Peak Wavelength Dominant Wavelength[2] Forward Voltage Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv λpeak λd VF VR I v-m Min. 0.97 Typ. 1.5 632 622 2.1 Max. 2.4 3.0 Units mcd nm nm V V 2:1 Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor GaP Green Devices HDSPParameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength S61G Dominant Wavelength[2] S66G B61Z Forward Voltage B66Z Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv λpeak λd VF VR Iv-m Min. 1.46 Typ. 3.0 568 573 2.3 Max. 2.6 3.0 Units mcd nm nm V V 2:1 Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor Bi-Color Devices HDSPParameter Luminance/Dot B61Z (Digit Average)[1] B66Z Symbol Iv Min. Typ. Max. Units Cd/m2 Test Conditions IFP = 40 mA, 1/8 Duty Factor Notes: 1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings. 9 Intensity Bin Limits[1] (mcd at IFP = 40 mA, 1/8 Duty Factor) GaP Red Bin Name E F Min.[2] 0.97 1.46 Max.[2] 1.45 2.19 G 2.2 3.3 Min.[2] 1.46 2.2 3.31 Max.[2] 2.19 3.3 4.97 GaP Green Bin Name F G H Bi-Color (Cd/m2 at IFP = 40 mA, 1/8 Duty Factor) Min.[2] 86 104 124 149 179 215 258 Bin Name F G H I J K L Max.[2] 104 124 149 179 215 258 310 Hue Grade Coordinate X Y 4 0.542-0.553 0.445-0.456 5 0.552-0.563 0.435-0.446 6 0.562-0.573 0.425-0.436 Bin 7 0.572-0.583 0.415-0.426 8 0.582-0.593 0.405-0.416 9 0.592-0.603 0.395-0.406 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ± 10%. Color Bin Limits (nm)[1] GaP Green Bin Name 3 4 5 Min.[2] 569.1 571.1 573.1 Max.[2] 571 573 575 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each color bin limit is ± 1.0 nm. 10 10 0.602-0.613 0.385-0.396 25 GaP RED 20 15 GaP GREEN 10 5 0 0 10 20 30 40 50 60 70 80 90 35 GaP RED 30 25 20 15 GaP GREEN 10 5 0 0.5 0 RELATIVE LUMINANCE (NORMALIZED TO 1 AT 40 mA PEAK) 1.0 GaP RED 0.6 0.4 0.2 0 0 10 20 30 40 50 1.5 2.0 2.5 3.0 Figure 2. Forward current vs. forward voltage. GaP GREEN 0.8 1.0 VF – FORWARD VOLTAGE – V 1.2 ηPEAK – RELATIVE EFFICIENCY 45 40 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum allowable average current per dot vs. ambient temperature. 60 IPEAK – PEAK DOT CURRENT – mA Figure 3. Relative efficiency (luminous intensity per unit current per dot) vs. peak current per dot. 11 IF – FORWARD CURRENT PER DOT – mA IF AVG. – MAXIMUM AVERAGE CURRENT – mA 30 3.0 2.5 2.0 1.5 1.0 0.5 0 0 10 20 30 40 50 60 70 80 90 100 IPEAK – PEAK FORWARD CURRENT – mA Figure 4. Relative luminance vs. peak forward current. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability data sheet 32.9 mm General Purpose 5 x 8 Dot Matrix Alphanumeric Displays. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. Obsoletes 5988-1744EN July 9, 2004 5988-5214EN