HJZ-B-100 0°/180°POWER DIVIDER / COMBINER 1 to 200 MHz / Symmetrical Phase / High Isolation / Low Insertion Loss / CaseFree Package PRINCIPAL SPECIFICATIONS Model Number Frequency Range, MHz Performance Bandwidth, MHz HJZ-B-100 1 - 200 MHz 2 - 100 1 - 200 B - Outline Isolation, Insertion E - H Ports, Loss, dB, dB, Min. Max. 30 20 0.5 0.8 Amplitude Balance, dB, Max. Phase Balance, Max. VSWR, Max. 0.2 0.4 ± 3° ± 5° 1.3:1 1.5:1 GENERAL SPECIFICATIONS Impedance: Coupling: CW Input: Weight, nominal: Operating Temperature: 50 Ω nom. -- 3 dB nom. 1 Watt max. 0.007 oz (200 mg) -- 55° to +85°C Key to Pads and Signal State Σ ∆ Co-Linear Co-Linear (Sum) (Delta) 1 2 Pad 2 Pad 3 Pad 1 Pad 4 Isol. In 0° ref. -- 180° In Isol. 0° ref. 0° NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over millimeters. General Notes: 1. The HJZ-B series of 0°/180° hybrid junctions covers 1 to 200 MHz using lumped element technology to achieve good isolation and balance over wide bandwidths. 2. These units have been designed for size and process compatibility with MMIC and similar devices. In particular, the height of the component is limited to 0.130" so that it can be mounted with other miniature components in a low profile hermetic housing. 3. The metallized alumina substrate may be attached to the main ground plane using silver epoxy or solder while signal leads may be wire bonded, epoxied or soldered to the gold pads. 4. All units comply with MIL-P-23971 and can be supplied screened to comply with specifications you designate for high reliability applications. 24May96 For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531