T-13/4 (5 mm) High Intensity LED Lamps Technical Data HLMP-331x Series HLMP-341x Series HLMP-351x Series Features • High Intensity • Choice of 3 Bright Colors High Efficiency Red Yellow High Performance Green • Popular T-13/4 Diameter Package • Selected Minimum Intensities • Narrow Viewing Angle • General Purpose Leads • Reliable and Rugged • Available on Tape and Reel Description This family of T-13/4 nondiffused LED lamps is specially designed for applications requiring higher on-axis intensity than is achievable with a standard lamp. The light generated is focused to a narrow beam to achieve this effect. Selection Guide Luminous Intensity Iv (mcd) @ 10 mA Color Red Yellow Green Part Number Min. Max. HLMP-3315 13.8 - HLMP-3317 22.00 - HLMP-3316-I00xx 22.0 - HLMP-3316-IJ0xx 22.0 70.4 HLMP-3415 9.2 - HLMP-3416 14.7 - HLMP-3416-G00xx 14.7 - HLMP-3416-IJ0xx 37.6 120.2 HLMP-3517 6.7 - HLMP-3519 10.6 - HLMP-3519-F00xx 10.6 - HLMP-3519-IJ0xx 43.6 139.6 2 Package Dimensions Part Numbering System HLMP - 3 x 1 x - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads B1: Right Angle Housing, Uneven Leads B2: Right Angle Housing, Even Leads Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Brightness Level 5, 7: Less Brightness 6, 9: Higher Brightness Color Options 3: GaP HER 4: GaP Yellow 5: GaP Green 3 Electrical Characteristics at TA = 25°C Symbol IV 2θ1/2 Description Luminous Intensity Including Angle Between Half Luminous Intensity Points Device HLMP- Min. Typ. 3315 3316 13.8 22 3415 3416 3517 3519 Max. Units Test Conditions 40.0 60.0 mcd IF = 10 mA (Figure 3) 9.2 14.7 40.0 50.0 mcd IF = 10 mA (Figure 8) 6.7 10.6 50.0 70.0 mcd IF = 10 mA (Figure 13) 3315 3316 35 35 Deg. IF = 10 mA See Note 1 (Figure 6) 3415 3416 35 35 Deg. IF = 10 mA See Note 1 (Figure 11) 3517 3519 24 24 Deg. IF = 10 mA See Note 1 (Figure 16) λPEAK Peak Wavelength 331X 341X 351X 635 583 565 nm ∆λ1/2 Spectral Line Halfwidth 331X 341X 351X 40 36 28 nm λd Dominant Wavelength 331X 341X 351X 626 585 569 nm τs Speed of Response 331X 341X 351X 90 90 500 ns C Capacitance 331X 341X 351X 11 15 18 pF Thermal Resistance 331X 341X 351X 260 °C/W VF Forward Voltage 331X 341X 351X 1.9 2.0 2.1 VR Reverse Breakdown Volt. ηV Luminous Efficacy RθJ-PIN All 331X 341X 351X 5.0 145 500 595 2.4 2.4 2.7 Measurement at Peak (Figure 1) See Note 2 (Figure 1) VF = 0; f = 1 MHz Junction to Cathode Lead V IF = 10 mA (Figure 2) IF = 10 mA (Figure 7) IF = 10 mA (Figure 12) V IR = 100 µA lumens Watt See Note 3 Notes: 1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant intensity, Ie, in watts/steradian, may be found from the equation I e = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. 4 Absolute Maximum Ratings at TA = 25°C Parameter Peak Forward Current Average Forward DC Current[1] Current[2] Power Dissipation[3] Reverse Voltage (IR = 100 µA) Transient Forward (10 µsec Pulse) Current[4] LED Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] 331X Series 341X Series 351X Series Units 90 60 90 mA 25 20 25 mA 30 20 30 mA 135 85 135 mW 5 5 5 V 500 500 500 mA 110 110 110 °C -55 to +100 -55 to +100 -20 to +100 °C -55 to +100 260°C for 5 seconds Notes: 1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions. 2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C. 3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at 1.6 mW/°C. 4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings. Figure 1. Relative Intensity vs. Wavelength. 5 High Efficiency Red HLMP-331X Series Figure 2. Forward Current vs. Forward Voltage Characteristics. Figure 5. Maximum Tolerable Peak Current vs. Pulse Duration (IDC MAX as per MAX Ratings). Figure 3. Relative Luminous Intensity vs. DC Forward Current. Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak LED Current. Figure 6. Relative Luminous Intensity vs. Angular Displacement. 6 Yellow HLMP-341X Series Figure 7. Forward Current vs. Forward Voltage Characteristics. Figure 10. Maximum Tolerable Peak Current vs. Pulse Duration (IDC MAX as per MAX Ratings). Figure 8. Relative Luminous Intensity vs. DC Forward Current. Figure 9. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Figure 11. Relative Luminous Intensity vs. Angular Displacement. 7 Green HLMP-351X Series Figure 12. Forward Current vs. Forward Voltage Characteristics. Figure 15. Maximum Tolerable Peak Current vs. Pulse Duration (IDC MAX as per MAX Ratings). Figure 13. Relative Luminous Intensity vs. DC Forward Current. Figure 14. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak LED Current. Figure 16. Relative Luminous Intensity vs. Angular Displacement. T-1 3/4 Lamp. 8 Table 2. Intensity Bin Limit Intensity Range (mcd) Color Bin Min. Max. H 15.5 24.8 I 24.8 39.6 J 39.6 63.4 K 63.4 101.5 L 101.5 162.4 M 162.4 234.6 N 234.6 340.0 O 340.0 540.0 Red P 540.0 850.0 Q 850.0 1200.0 R 1200.0 1700.0 S 1700.0 2400.0 T 2400.0 3400.0 U 3400.0 4900.0 V 4900.0 7100.0 W 7100.0 10200.0 X 10200.0 14800.0 Y 14800.0 21400.0 Z 21400.0 30900.0 Maximum tolerance for each bin limit is ± 18%. Table 2. (Cont'd) Intensity Range (mcd) Color Bin Min. Max. G 16.6 26.5 H 26.5 42.3 I 42.3 67.7 J 67.7 108.2 K 108.2 173.2 L 173.2 250.0 M 250.0 360.0 Yellow N 360.0 510.0 O 510.0 800.0 P 800.0 1250.0 Q 1250.0 1800.0 R 1800.0 2900.0 S 2900.0 4700.0 T 4700.0 7200.0 U 7200.0 11700.0 V 11700.0 18000.0 W 18000.0 27000.0 Table 2. (Cont'd) Intensity Range (mcd) Color Bin Min. Max. E 7.6 12.0 F 12.0 19.1 G 19.1 30.7 H 30.7 49.1 I 49.1 78.5 J 78.5 125.7 K 125.7 201.1 L 201.1 289.0 Green M 289.0 417.0 N 417.0 680.0 O 680.0 1100.0 P 1100.0 1800.0 Q 1800.0 2700.0 R 2700.0 4300.0 S 4300.0 6800.0 T 6800.0 10800.0 U 10800.0 16000.0 V 16000.0 25000.0 W 25000.0 40000.0 9 Color Categories Color Cat # Green Yellow Lambda (nm) Min. Max. 6 561.5 564.5 5 564.5 567.5 4 567.5 570.5 3 570.5 573.5 2 573.5 576.5 1 582.0 584.5 3 584.5 587.0 2 587.0 589.5 4 589.5 592.0 5 592.0 593.0 Tolerance for each bin limit is ± 0.5 nm. Mechanical Option Matrix Mechanical Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag 01 Tape & Reel, crimped leads, minimum increment 1300 pcs/bag 02 Tape & Reel, straight leads, minimum increment 1300 pcs/bag B1 Right Angle Housing, uneven leads, minimum increment 500 pcs/bag B2 Right Angle Housing, even leads, minimum increment 500 pcs/bag Note: All Categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.semiconductor.agilent.com Data subject to change. Copyright © 2001 Agilent Technologies, Inc. July 16, 2001 Obsoletes 5964-9293E (4/96) 5988-2146EN