HSMx-A2-xx-xxxxx Bi-Color HSMx-A3xx-xxxxx Tri-Color Surface Mount LED Indicators, PLCC-4 SMT LEDs Data Sheet Description Features This family of SMT LEDs is packaged in the industry standard PLCC-4 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. • Industry Standard PLCC-4 package (Plastic Leaded Chip Carrier) • High reliability LED package • High brightness using AlInGaP and InGaN dice technologies • Available in full selection of colors • Super wide viewing angle at 120° • Available in 8 mm carrier tape on 7-inch reel • Compatible with IR soldering process To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color to provide close uniformity. These LEDs are compatible with IR and TTW solder reflow process. This super wide viewing angle at 120° together with the built in reflector pushing up the intensity of the light output makes these LED suitable to be used in the interior electronics signs. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. This is suitable for general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. Applications • Electronic signs and signals – Interior full color sign – Variable message sign • Interior automotive – Instrument cluster backlighting – Central console backlighting – Cabin backlighting • Office automation, home appliances, industrial equipment – Front panel backlighting – Display backlighting CAUTION: HSMF-Axxx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details. Package Dimensions 2.8 ± 0.2 1.9 ± 0.2 2.2 ± 0.2 (2) 0.1 TYP. 0.8 ± 0.1 (3) 3.2 ± 0.2 3.5 ± 0.2 0.8 ± 0.3 (1) (4) 0.5 ± 0.1 CATHODE MARKING 0.7 ± 0.1 NOTE: 1. ALL DIMENSIONS IN mm. Tri Color 1 Cathode (Color 1) 2 Common Anode 3 Cathode (Color 3) 4 Cathode (Color 2) Bi Color 1 Cathode (Color 1) 2 Anode (Color 1) 3 Cathode (Color 2) 4 Anode (Color 2) Device Selection Guide Bi Color Part Number Color 1 Color 2 HSMF-A201- xxxxx GaP Red GaP Yellow Green HSMF-A202- xxxxx GaP Red GaP Yellow HSMF-A203- xxxxx GaP Red GaP Emerald Green HSMF-A204- xxxxx GaP Orange GaP Yellow Green HSMF-A205- xxxxx GaP Orange GaP Emerald Green HSMF-A206- xxxxx GaP Yellow GaP Yellow Green HSMF-A211- xxxxx AlGaAs Red GaP Yellow Green HSMF-A212- xxxxx AlGaAs Red GaP Yellow HSMF-A222- xxxxx AlInGaPRed AlInGaP Amber HSMF-A227- xxxxx AlInGaP Red GaN Blue HSMF-A228- xxxxx AlInGaP Amber GaN Blue HSMF-A226- xxxxx AlInGaP Amber AlInGaP Yellow Green Color 1 Color 2 Min. Iv @ 20 mA Typical Iv @ 20 mA Min. Iv @ 20 mA Part Number Bin ID (mcd) (mcd) Bin ID (mcd) Typical Iv @ 20 mA (mcd) HSMF-A201-A00J1 K2 8.0 16.0 L1 10.0 20.0 HSMF-A202-A00J1 K2 8.0 16.0 K1 6.3 12.0 HSMF-A203-A00J1 K2 8.0 16.0 J1 4.0 8.0 HSMF-A204-A00J1 K2 8.0 16.0 L1 10.0 20.0 HSMF-A205-A00J1 K2 8.0 16.0 J1 4.0 8.0 HSMF-A206-A00J1 K2 8.0 16.0 L1 10.0 20.0 HSMF-A211-A00J1 L2 12.5 25.0 L1 10.0 20.0 HSMF-A212-A00J1 L2 12.5 25.0 K1 6.3 12.0 HSMF-A222-A00J1 P1 40.0 80.0 P1 40.0 80.0 HSMF-A227-A00J1 P1 40.0 80.0 J2 5.0 10.0 HSMF-A228-A00J1 P1 40.0 80.0 J2 5.0 10.0 HSMF-A226-A00J1 P2 49.0 100.0 M2 20.0 60.0 Note: 1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. Tri Color Part Number Color 1 Color 2 Color 3 GaP Red GaP Yellow GreenGaN Blue HSMF-A331-xxxxx AlInGaP Red InGaN Green GaN Blue HSMF-A332-xxxxx AlInGaP Red Orange InGaN Green GaN Blue HSMF-A341-xxxxx AllnGaP Red InGaN Green InGaN Blue HSMF-A342-xxxxx AllnGaP Red Orange InGaN Green InGaN Blue HSMF-A301-xxxxx Color 1 Color 2 Color 3 Min. Iv Typical Iv Min. Iv Typical Iv Min. Iv @ 20 mA @ 20 mA @ 20 mA @ 20 mA @ 20 mA Part Number Bin ID (mcd) (mcd) Bin ID (mcd) (mcd) Bin ID (mcd) Typical Iv @ 20 mA (mcd) HSMF-A301-A00J1 K2 HSMF-A331-A00J1 8.0 13.0 L2 P1 40.0 80.0 HSMF-A332-A00J1 P1 40.0 HSMF-A341-A00J1 HSMF-A342-A00J1 12.5 20.0 K2 8.0 10.0 R1 99.0 160.0 K2 8.0 10.0 80.0 R1 99.0 160.0 K2 8.0 10.0 P1 40.0 80.0 R1 99.0 160.0 N1 25.0 40.0 P1 40.0 80.0 R1 99.0 160.0 N1 25.0 40.0 Note: 1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. Part Numbering System HSM x 1 – A x 2 x 3 x 4 – x 5 x 6 x 7 x 8 x 9 Packaging Option Color Bin Selection Intensity Bin Select Device Specification Configuration Package Type LED Chip Color Absolute Maximum Ratings (TA = 25°C) Parameters GaP AlGaAs DC Forward Current[1] 30 mA 30 mA 30 mA[3,4] 20 mA[4] Peak Forward Current[2] 100 mA 100 mA 100 mA 100 mA 100 mA Power Dissipation 78 mW 78 mW 72 mW 48 mW 120 mW Red, Amber AlInGaP Yellow Green GaN/InGaN 20 mA Reverse Voltage 5 V Junction Temperature 110°C Operating Temperature –55°C to +100°C Storage Temperature Notes: –55°C to +100°C 1. 2. 3. 4. Derate linearly as shown in figure 4. Duty factor = 10%, Frequency = 1kHz. Drive Current between 10 mA and 30 mA are recommended for best long term performance. Operation at current below 5 mA is not recommended. Optical Characteristics (TA = 25°C) Color Peak Wavelength λPEAK (nm) Typ. Dominant Wavelength Viewing Angle λD (nm)[1] 2θ1/2 (Degrees)[2] Typ. Typ. Luminous Efficacy ηv (lm/W)[3] Typ. Luminous Intensity/ Total Flux Iv (mcd) /Φv (mlm) Typ. GaP Red 635 626 120 120 0.45 AlGaAs Red 645 637 120 63 0.45 AlInGaP Red 635 626 120 150 0.45 AlInGaP Red Orange 621 615 120 240 0.45 GaP Orange 600 602 120 380 0.45 AlInGaP Amber 592 590 120 480 0.45 GaP Yellow 583 585 120 580 0.45 AlInGaP Amber 592 590 120 480 0.45 GaP Yellow Green 565 569 120 590 0.45 GaP Emerald Green 558 560 120 650 0.45 InGaN Green 523 525 120 500 0.45 InGaN Blue 468 470 120 75 0.45 GaN Blue 428 462 120 65 0.45 AlInGaP Yellow Green Notes: 575 571 120 620 0.45 1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. Electrical Characteristics (TA = 25°C) Dice Technology Forward Voltage VF (Volts) @ IF = 20mA Typ. Max. Reverse Voltage VR @ 100 µA Min. Reverse Voltage VR @ 10 µA Min. GaP 2.2 2.6 5 - AS AlGaAs 1.9 2.6 5 - AlInGaP 1.9 2.4 5 - GaN Blue 3.9 4.3 - 5 InGaN 3.4 4.05 - 5 1.0 RELATIVE INTENSITY 0.9 0.8 BLUE YELLOW GREEN CYAN AMBER GREEN 0.7 ORANGE 0.6 0.5 0.4 RED ORANGE 0.3 RED 0.2 0.1 0 380 430 480 530 580 630 680 730 780 WAVELENGTH – nm RELATIVE INTENSITY 1.0 GaP EMERALD GREEN 0.8 GaP HSMx-A2xx fig 1a YELLOW GREEN 0.6 GaP YELLOW GaP ORANGE GaN BLUE 0.4 GaP RED 0.2 0 380 430 480 530 580 630 680 730 780 WAVELENGTH – nm Figure 1. Relative intensity vs. wavelength. HSMx-A2xx fig 1b 1.8 30 25 GaP 20 15 AlGaAs InGaN AS AlInGaP 10 GaN BLUE 5 0 0 1 2 3 4 FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. 5 35 1.6 Gap AlInGaP AlGaAs 1.4 30 InGaN 1.2 GaN 1.0 0.8 0.6 0.4 AlGaAs GaP 25 AS AlInGaP 20 InGaN/GaN 15 10 5 0.2 0 CURRENT – mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) FORWARD CURRENT – mA 35 0 5 10 15 20 25 30 DC FORWARD CURRENT – mA Figure 3. Relative intensity vs. forward voltage. HSMx-A2xx fig 2 HSMx-A2xx fig 3 35 0 0 20 40 60 80 100 120 TEMPERATURE – °C Figure 4a. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110°C, HSMx-A2xx fig 4a RθJA = 500°C/W (1 chip on). DOMINANT WAVELENGTH – nm MAXIMUM FORWARD CURRENT – mA 540 35 30 AlGaAs GaP 25 AS AlInGaP 20 15 InGaN/GaN 10 5 0 0 20 40 60 80 100 530 510 500 490 480 InGaN BLUE 470 460 120 InGaN GREEN 520 0 5 AMBIENT TEMPERATURE – °C 10 15 20 25 Figure 4b. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110°C, RθJA = 700°C/W (3 chip on). HSMx-A2xx fig 4b NORMALIZED INTENSITY 0.8 0.6 0.4 0.2 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT – DEGREES Figure 6. Radiation pattern. HSMx-A2xx fig 6 0.9 HSMF-A341 0.8 HSMF-A342 HSMF-A331 Y-COORDINATE 0.7 BLACK BODY CURVE 0.6 HSMF-A332 HSMF-A301 CIE CHART 1931 0.5 0.4 0.3 0.2 0.1 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 X-COORDINATE Figure 7. Chromaticity diagram for Tricolor. 35 Figure 5. Dominant wavelength vs. forward current – InGaN. 1.0 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 30 CURRENT – mA 0.8 0.9 10 to 20 SEC. 217 °C 240°C MAX. 3°C/SEC. MAX. 100-150°C TEMPERATURE TEMPERATURE 20 SEC. MAX. 183°C –6°C/SEC. MAX. 3°C/SEC. MAX. 120 SEC. MAX. 255 °C +5 °C -0 °C 3 °C/SEC. MAX. 125 °C ± 25 °C 6 °C/SEC. MAX. MAX. 120 SEC. 60 to 150 SEC. 60-150 SEC. TIME TIME * THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX. Figure 8a. Recommended SnPb reflow soldering profile. Figure 8b. Recommended Pb-free reflow soldering profile. Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. 2.60 3.30 3.30 0.40 1.10 0.50 4.50 7.50 1.50 SOLDER RESIST Figure 9. Recommended soldering pad pattern. HSMx-A2xx fig 9 TRAILER COMPONENT LEADER 200 mm MIN. FOR ∅180 REEL. 200 mm MIN. FOR ∅330 REEL. 480 mm MIN. FOR ∅180 REEL. 960 mm MIN. FOR ∅330 REEL. C A USER FEED DIRECTION Figure 10. Tape leader and trailer dimension. HSMx-A2xx fig 8 4 ± 0.1 4 ± 0.1 2 ± 0.05 2.29 ± 0.1 1.75 ± 0.1 +0.1 ∅1.5 –0 C 3.5 ± 0.05 +0.3 8 –0.1 3.81 ± 0.1 A +0.1 ∅1 –0 3.05 ± 0.1 8° 0.229 ± 0.01 Figure 11. Tape leader and trailer dimension. HSMx-A2xx fig 9 2 +0.5 –0 Ø 20.5 ± 0.3 62.5 180 +0 –2.5 Ø 13 ± 0.2 8.4 LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm) Figure 12. Reel dimension. +1.50 (MEASURED AT OUTER EDGE) –0.00 14.4 (MAX. MEASURED AT HUB) 7.9 (MIN.) 10.9 (MAX.) USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 13. Reeling Orientation. HSMx-A2xx fig 11 Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - Unopen moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. - It is not recommended to open the MBB prior to assembly (e.g. for IQC). B. Control after opening the MBB - The humidity indicator card (HIC) shall be read immediately upon opening of MBB. - The LEDs must be kept at <30°C / 60%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours. C. Control for unfinished reel - For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH. D. Control of assembled boards - If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of 672 hours. E. Baking is required if: - “10%” or “15%” HIC indicator turns pink. - The LEDs are exposed to condition of >30°C / 60% RH at any time. - The LEDs floor life exceeded 672 hours. Recommended baking condition: 60±5°C for 20 hours. 10 Iv Bin Select (X5X6) Individual reel will contain parts from 1 half bin only. X5 Min. Iv Bin Selection For HSMF-A201-xxxxx HSMF-A204-xxxxx HSMF-A206-xxxxx For HSMF-A202-xxxxx Minimum Intensity Bin Color 1 (Red) Color 2 (Yellow) A K2 B For HSMF-A203-xxxxx HSMF-A205-xxxxx Minimum Intensity Bin K1 Color 1 (Red/Orange) Color 2 (Green) K2 K2 A K2 J1 Minimum Intensity Bin C K2 L1 B K2 J2 Color 1 (Red/Yellow/ Orange) D K2 L2 C K2 K1 Color 2 (Green) E K2 M1 D K2 K2 F L1 K1 E K2 L1 A K2 L1 G L1 K2 F L1 J1 B K2 L2 H L1 L1 G L1 J2 C K2 M1 J L1 L2 H L1 K1 D K2 M2 K L1 M1 J L1 K2 E K2 N1 L L2 K1 K L1 L1 F L1 L1 M L2 K2 L L2 J1 G L1 L2 N L2 L1 M L2 J2 H L1 M1 P L2 L2 N L2 K1 J L1 M2 Q L2 M1 P L2 K2 K L1 N1 R M1 K1 Q L2 L1 L L2 L1 S M1 K2 R M1 J1 M L2 L2 T M1 L1 S M1 J2 N L2 M1 U M1 L2 T M1 K1 P L2 M2 V M1 M1 U M1 K2 Q L2 N1 W M2 K1 V M1 L1 R M1 L1 X M2 K2 W M2 J1 S M1 L2 Y M2 L1 X M2 J2 T M1 M1 Z M2 L2 Y M2 K1 U M1 M2 1 M2 M1 Z M2 K2 V M1 N1 1 M2 L1 W M2 L1 X M2 L2 Y M2 M1 Z M2 M2 1 M2 N1 For HSMF-A211-xxxxx For HSMF-A212-xxxxx For HSMF-A222-xxxxx Minimum Intensity Bin Minimum Intensity Bin Minimum Intensity Bin Color 1 (Red) Color 2 (Green) Color 1 (Red) Color 2 (Yellow) Color 1 (Red) Color 2 (Amber) A L2 L1 A L2 K1 A P1 P1 B L2 L2 B L2 K2 B P1 P2 C L2 M1 C L2 L1 C P1 Q1 D L2 M2 D L2 L2 D P1 Q2 E L2 N1 E L2 M1 E P1 R1 F M1 L1 F M1 K1 F P2 P1 G M1 L2 G M1 K2 G P2 P2 H M1 M1 H M1 L1 H P2 Q1 J M1 M2 J M1 L2 J P2 Q2 K M1 N1 K M1 M1 K P2 R1 L M2 L1 L M2 K1 L Q1 P1 M M2 L2 M M2 K2 M Q1 P2 N M2 M1 N M2 L1 N Q1 Q1 P M2 M2 P M2 L2 P Q1 Q2 Q M2 N1 Q M2 M1 Q Q1 R1 R N1 L1 R N1 K1 R Q2 P1 S N1 L2 S N1 K2 S Q2 P2 T N1 M1 T N1 L1 T Q2 Q1 U N1 M2 U N1 L2 U Q2 Q2 V N1 N1 V N1 M1 V Q2 R1 W N2 L1 W N2 K1 W R1 P1 X N2 L2 X N2 K2 X R1 P2 Y N2 M1 Y N2 L1 Y R1 Q1 Z N2 M2 Z N2 L2 Z R1 Q2 1 N2 N1 1 N2 M1 1 R1 R1 2 R2 P1 3 R2 P2 4 R2 Q1 5 R2 Q2 6 R2 R1 Note: 0 represents no maximum bin limit. For HSMF-A227-xxxxx HSMF-A228-xxxxx For HSMF-A331-xxxxx HSMF-A332-xxxxx For HSMF-A341-xxxxx HSMF-A342-xxxxx Minimum Intensity Bin Minimum Intensity Bin Minimum Intensity Bin Color 1 (Red/Amber) Color 2 (Blue) A P1 J2 Color 1 (Red/Red Orange) Color 2 (Green) Color 3 (Blue) Color 1 (Red/Red Orange) Color 2 (Green) Color 3 (Blue) B P1 K1 A P1 R1 K2 A P1 R1 N1 C P1 K2 B P1 R1 L1 B P1 R1 N2 D P1 L1 C P1 R1 L2 C P1 R1 P1 E P1 L2 D P1 R2 K2 D P1 R2 N1 F P2 J2 E P1 R2 L1 E P1 R2 N2 G P2 K1 F P1 R2 L2 F P1 R2 P1 H P2 K2 G P1 S1 K2 G P1 S1 N1 J P2 L1 H P1 S1 L1 H P1 S1 N2 K P2 L2 J P1 S1 L2 J P1 S1 P1 L Q1 J2 K P2 R1 K2 K P2 R1 N1 M Q1 K1 L P2 R1 L1 L P2 R1 N2 N Q1 K2 M P2 R1 L2 M P2 R1 P1 P Q1 L1 N P2 R2 K2 N P2 R2 N1 Q Q1 L2 P P2 R2 L1 P P2 R2 N2 R Q2 J2 Q P2 R2 L2 Q P2 R2 P1 S Q2 K1 R P2 S1 K2 R P2 S1 N1 T Q2 K2 S P2 S1 L1 S P2 S1 N2 U Q2 L1 T P2 S1 L2 T P2 S1 P1 V Q2 L2 U Q1 R1 K2 U Q1 R1 N1 W R1 J2 V Q1 R1 L1 V Q1 R1 N2 X R1 K1 W Q1 R1 L2 W Q1 R1 P1 Y R1 K2 X Q1 R2 K2 X Q1 R2 N1 Z R1 L1 Y Q1 R2 L1 Y Q1 R2 N2 1 R1 L2 Z Q1 R2 L2 Z Q1 R2 P1 2 R2 J2 1 Q1 S1 K2 1 Q1 S1 N1 3 R2 K1 2 Q1 S1 L1 2 Q1 S1 N2 4 R2 K2 3 Q1 S1 L2 3 Q1 S1 P1 5 R2 L1 4 Q2 R1 K2 4 Q2 R1 N1 6 R2 L2 5 Q2 R1 L1 5 Q2 R1 N2 6 Q2 R1 L2 6 Q2 R1 P1 7 Q2 R2 K2 7 Q2 R2 N1 8 Q2 R2 L1 8 Q2 R2 N2 9 Q2 R2 L2 9 Q2 R2 P1 X6 Number of Half bins from X5 For HSMF-A3xx-xxxxx Intensity Bin Limits For HSMF-A2xx-xxxxx Color 1 (Red/Red Orange) Color 2 (Green) Color 3 (Blue) Color 1 Color 2 0 0 0 0 0 0 0 A 0 5 A 5 5 5 B 0 4 B 5 5 4 C 0 3 C 5 5 3 D 0 2 D 5 4 5 E 5 0 E 5 4 4 F 5 5 F 5 4 3 G 5 4 G 5 3 5 H 5 3 H 5 3 4 J 5 2 J 5 3 3 K 4 0 K 4 5 5 L 4 5 L 4 5 4 M 4 4 M 4 5 3 N 4 3 N 4 4 5 P 4 2 P 4 4 4 Q 3 0 Q 4 4 3 R 3 5 R 4 3 5 S 3 4 S 4 3 4 T 3 3 T 4 3 3 U 3 2 U 3 5 5 V 2 0 V 3 5 4 W 2 5 W 3 5 3 X 2 4 X 3 4 5 Y 2 3 Y 3 4 4 Z 2 2 Z 3 4 3 1 3 3 5 2 3 3 4 3 3 3 3 Note: 0 represents no maximum bin limit. Note: 0 represents no maximum bin limit. Bin ID Min. (mcd) Max. (mcd) J1 4.50 5.60 J2 5.60 7.20 K1 7.20 9.00 K2 9.00 11.20 L1 11.20 14.00 L2 14.00 18.00 M1 18.00 22.40 M2 22.40 28.50 N1 28.50 35.50 N2 35.50 45.00 P1 45.00 56.00 P2 56.00 71.50 Q1 71.50 90.00 Q2 90.00 112.50 R1 112.50 140.00 R2 140.00 180.00 S1 180.00 224.00 S2 224.00 285.00 T1 285.00 355.00 T2 355.00 450.00 U1 450.00 560.00 U2 560.00 715.00 V1 715.00 900.00 V2 900.00 1125.00 Tolerance of each bin limit = ±12%. Color Bin Select (X7) Individual reel will contain parts from 1 full bin only. X7 Color Bin Combinations For HSMF-A202-xxxxx HSMF-A203-xxxxx HSMF-A212-xxxxx HSMF-A222-xxxxx HSMF-A227-xxxxx For HSMF-A204-xxxxx HSMF-A206-xxxxx For HSMF-A205-xxxxx HSMF-A228-xxxxx Color 1 (Yellow/Amber/ Orange) Color 2 (Emerald Green/Blue) 0 0 0 A ABC ABC B BCD ABC Color 1 (Red) Color 2 (Emerald Green/ Yellow/Blue) C CDE ABC D ABC BCD E BCD BCD 0 0 0 F CDE BCD A 0 ABC G ABC CDE B 0 ABCD H BCD CDE C 0 ABCDE J CDE CDE D 0 BCD K DEF ABC E 0 BCDE L DEF BCD F 0 BCDEF M DEF CDE G 0 CDE N AB AB H 0 DEF P BC AB J 0 CDEF Q CD AB K 0 AB R DE AB L 0 BC S AB BC M 0 CD T BC BC N 0 DE U CD BC P 0 EF V DE BC Note: 0 represents full distribution. W AB CD X BC CD Y CD CD Z DE CD 1 AB DE 2 BC DE 3 CD DE 4 DE DE 5 EF AB 6 EF BC 7 EF CD For HSMF-A201-xxxxx HSMF-A211-xxxxx Color 1 (Red) Color 2 (Yellow Green) 0 0 0 A 0 EFG B 0 FGH C 0 EF D 0 FG E 0 GH Note: 0 represents full distribution. Note: 0 represents full distribution. Color 1 (Yellow/ Amber/ Orange) Color 2 (Yellow Green) 0 0 0 A ABC EFG B BCD EFG C CDE EFG D DEF EFG E ABC FGH F BCD FGH G CDE FGH H DEF FGH J AB EF K BC EF L CD EF M DE EF N EF EF P AB FG Q BC FG R CD FG S DE FG T EF FG U AB GH V BC GH W CD GH X DE GH Y EF GH Note: 0 represents full distribution. For HSMF-A3xx-xxxxx Color Bin Limits Amber/ Yellow Min. (nm) Max. (nm) A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 Max. (nm) E 592.0 594.5 515.0 520.0 F 594.5 597.0 B 520.0 525.0 BCD C 525.0 530.0 Orange Min. (nm) Max. (nm) ABC AB D 530.0 535.0 A 597.0 600.0 0 ABC BC B 600.0 603.0 L 0 ABC CD 0 Max. (nm) 606.0 BCD Min. (nm) 603.0 0 Emerald Green C M D 606.0 609.0 N 0 BCD ABC A 552.5 555.5 E 609.0 612.0 P 0 BCD BCD B 555.5 558.5 Q 0 BCD AB C 558.5 561.5 R 0 BCD BC D 561.5 564.5 Red Orange Min. (nm) Max. (nm) S 0 BCD CD A 611.0 616.0 T 0 AB ABC B 616.0 620.0 U 0 AB V 0 Min. (nm) Max. (nm) W Color 1 Color 2 Color 3 Blue Min. (nm) Max. (nm) 0 0 0 0 A 460.0 465.0 A 0 0 ABC B 465.0 470.0 B 0 0 BCD C 470.0 475.0 C 0 0 AB D 475.0 480.0 D 0 0 BC E 0 0 CD Green Min. (nm) F 0 ABC 0 A G 0 ABC ABC H 0 ABC J 0 K BCD Yellow Green Min. (nm) Max. (nm) AB AB E 564.5 567.5 Red 0 AB BC F 567.5 570.5 Full Distribution X 0 AB CD G 570.5 573.5 Tolerance of each bin limit = ±1 nm. Y 0 BC ABC H 573.5 576.5 Z 0 BC BCD 1 0 BC AB 2 0 BC BC 3 0 BC CD 4 0 CD ABC 5 0 CD BCD 6 0 CD AB 7 0 CD BC 8 0 CD CD Packaging Option (X8X9) X8X9 J1 20 mA test current, Top Mount, 7 inch Reel Note: 0 represents full distribution. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes 5989-1210EN AV02-0501EN - June 13, 2007