H HiTRON UNIVERSAL INPUT AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI102 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES LOW-PROFILE U-BRACKET FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: V-M connector. Output Wattage: Typ. 100 watts. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2%. Aux.VO2/VO3/VO4 typ. ± 3-5% (Common choke). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output. UVP: Built-in at main output. Remote Sensing: Installed in main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Rating 100 to 240Vac. Input Connector: V-M connector. Input Frequency: 47-63Hz. Inrush Current: ≤30.6A peak @230Vac. Input Current: Typ. 1.8A @115Vac, 0.8A @230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 11mS @115Vac, 60mS @ 230Vac. Power Fail Signal: Installed. Earth Leakage: Less than 0.4mA @230Vac. GENERAL SPECIFICATION Efficiency: Typ. 80-82%. Switching Frequency: 63K Hz. Circuit Topology: Fixed frequency forward circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 4.10Watts / Cubic Inch. Operating Temperature: 0 to +50 °C under forced air flow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04%/°C. Cooling: At least 25 cfm direct forward air flow is required to achieve full rating power. Construction: U-bracket format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -29- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT DUAL OUTPUT MAIN VO1 Typ. 25.0A 20.0A 8.5A 6.8A 4.2A 3.0A 3.6A 2.8A 2.0A 1.3A MODEL NO. HVI102-19 HVI102-10 HVI102-11 HVI102-12 HVI102-13 HVI102-13B HVI102-14 HVI102-15 HVI102-16 HVI102-17 ★@# Volt. 3.3V 5.0V 12.0V 15.0V 24.0V 24.0V 28.0V 36.0V 48.0V 58.0V MAIN VO1 Typ. 10.0A 10.0A 10.0A 10.0A 7.5A 4.0A 3.4A 10.0A 12.0A 12.0A 12.0A MODEL NO. HVI102-20 HVI102-21 HVI102-22 HVI102-23 HVI102-23E HVI102-24 HVI102-25 HVI102-290 HVI102-291 HVI102-292 HVI102-293 AUX. ±VO2 ■ Typ. Volt. 10.0A -5.0V(+) 4.0A -12.0V(+) 3.0A -15.0V(+) 2.0A -24.0V(+) 2.0A -24.0V(+) 4.0A -12.0V(+) 3.4A -15.0V(+) 10.0A -5.0V(+) 4.0A -12.0V(+) 3.0A -15.0V(+) 2.0A -24.0V(+) ★@# Volt. +5.0V +5.0V +5.0V +5.0V +6.5V +12.0V +15.0V +3.3V +3.3V +3.3V +3.3V MODEL NO. (HVI102-20P) (HVI102-21P) (HVI102-22P) (HVI102-23P) (HVI102-23EP) (HVI102-24P) (HVI102-25P) (HVI102-290P) (HVI102-291P) (HVI102-292P) (HVI102-293P) TRIPLE OUTPUT MAIN +VO1 Typ. 10.0A 10.0A 10.0A 10.0A 18.0A 12.0A 12.0A MODEL NO. HVI102-30 HVI102-31 HVI102-32 HVI102-33 HVI102-390B HVI102-393 HVI102-394 ★@# Volt. +5.0V +5.0V +5.0V +5.0V +3.3V +3.3V +3.3V AUX. +VO2 ■ Typ. Volt. 3.4A +12.0V 3.4A +12.0V 1.5A +24.0V 2.5A +15.0V 4.0A +5.0V 3.4A +12.0V 2.8A +15.0V AUX. -VO3 ■ Typ. Volt. 0.6A -12.0V 0.6A - 5.0V 0.6A -12.0V 0.6A -15.0V 1.0A +12.0V 0.6A -12.0V 0.6A -15.0V ★@# Volt. +5.0V +5.0V +5.0V +5.0V +5.0V +5.0V +3.3V +5.0V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V AUX. +VO2 ■ Typ. Volt. 3.0A +12.0V 3.0A +12.0V 1.5A +24.0V 2.5A +15.0V 1.5A +24.0V 1.5A +24.0V 3.0A +12.0V 7.5A +3.3V 4.0A +5.0V 2.5A +15.0V 4.0A +5.0V 3.0A +12.0V 2.5A +15.0V 1.5A +24.0V 1.0A +5.0V 1.1A +5.0V AUX. -VO3 ■ Typ. Volt. 0.60A -12.0V 0.60A -5.0V 0.60A -12.0V 0.60A -15.0V 0.50A -15.0V 0.50A -15.0V 0.60A -12.0V 0.25A -12.0V 0.60A -12.0V 0.60A -15.0V 0.60A -15.0V 0.60A -12.0V 0.60A -15.0V 0.60A -12.0V 1.00A -5.0V 1.25A -48.0V QUAD OUTPUT MAIN +VO1 Typ. 10.0A 10.0A 10.0A 10.0A 10.0A 3.0A 12.0A 10.0A 12.0A 12.0A 12.0A 12.0A 12.0A 12.0A 7.0A 15.0A MODEL NO HVI102-40 HVI102-41 HVI102-42 HVI102-43 HVI102-44 HVI102-44E HVI102-490 HVI102-490E HVI102-490B HVI102-491 HVI102-491B HVI102-492 HVI102-493 HVI102-494 HVI102-495 HVI102-496E Symbol: "★" OVP built-in. "@" Adjustable. "＃" Remote sensing. "■" Coupled choke. "●" Installed with Post Regulator. MECHANICAL DIMENSIONS: MM [INCHES] AUX. VO4 ■ Typ. Volt. 0.60A 12.00V 0.60A 5.00V 0.60A 12.00V 0.60A 12.00V 0.50A 15.00V 0.50A 15.00V 0.60A 5.00V 0.25A 12.00V 0.60A 12.00V 0.60A 5.00V 0.60A 15.00V 0.60A 12.00V 0.60A 12.00V 0.60A 12.00V 2.50A 24.00V 0.30A 6.25V "◇" Floating(or isolated)output. WEIGHT: 448.5g (15.82 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT CONNECTOR & PIN # SINGLE OUTPUT AC-L AC-N AC-G P1-L P1-N P1-G VO1 DC-COM DUAL OUTPUT VO1 P2-1,2,3,4,5 P2-6,7,8,9,10,11 P2-1,2,3 VO2 P2-8,9 Mating connector: P1,2,3 Molex # 5195 or 5239 series. DC-COM TRIPLE OUTPUT VO1 P2-4,5,6,7,10,13 P2-1,2,3 -30- VO2 P2-8,9 VO3 QUAD OUTPUT DC-COM VO1 P2-11 P2-4,5,6,7,10,13 P2-1,2,3 ASSORTED SIGNAL +S P.F.S. VO2 VO3 +VO4 -VO4 DC-COM -S P2-8,9 P2-11 P2-14 P2-13 P2-4,5,6,7 P3-1 P3-2 P2-12