H HiTRON UNIVERSAL INPUT AC-DC PCB OPEN FRAME SINGLE & DUAL OUTPUT 10 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI10 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES COMPACT PCB OPEN FRAME FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range Typ. 90-264Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 10 watts. Output Connector: Molex # 5273. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-1.5%. Aux. VO2 typ. ±1-2%. (P.R.) Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Rating 100 to 240Vac. Input Connector: Molex # 5273. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A @230Vac. Input Current: Typ. 0.3A @115Vac, 0.15A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB.22 & FCC Class B. Hold-up Time: Typ. 20mS @115Vac, 80mS @230Vac. Earth leakage: Typ. 0.3mA @230Vac. GENERAL SPECIFICATION Efficiency: Typ. 65%. Switching Frequency: Typ. 55K Hz at 115Vac. Circuit Topology: Free-running flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04%/°C. Cooling: Free air convection. Construction: PCB open frame format. Power Density: 0.89Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -1- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HVI10-10 HVI10-11 HVI10-12 HVI10-13 Typ. 2.0A 1.0A 0.7A 0.5A MAIN VO1 @ Volt. 5.0V 12.0V 15.0V 24.0V Max. 3.00A 1.50A 1.20A 0.75A DUAL OUTPUT MODEL NO. HVI10-20 HVI10-21 HVI10-22 HVI10-23 MAIN VO1 @ ◇ Typ. Max. Volt. 2.5A 1.7A 5.0V 1.0A 2.0A 5.0V 1.0A 2.0A 5.0V 1.0A 2.0A 5.0V Typ. 0.3A 0.5A 0.4A 0.2A AUX. VO2 ●◇ Volt. 5.0V 12.0V 15.0V 24.0V Max. 0.5A 0.5A 0.5A 0.3A Symbol: " " OVP built-in. "@" Adjustable. "◇" Floating (or isolated) output. " " Installed with Post Regulator. (P.R.) Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Peak output, less than 60 Sec. with 10% duty cycles. (3) Max. current can't be drawn from all output at the same time. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 158.0 g (5.57 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-LINE AC-NEUTRAL AC-GROUND CONNECTOR P1-L P1-N P1-G &PIN # Mating connector: Molex 5195 or 5239 series. -VO1 P2-1,2 -2- SINGLE/DUAL OUTPUT +VO1 -VO2 P2-3,4 P2-5 +VO2 P2-6