H HiTRON UNIVERSAL INPUT AC-DC INTERNAL OPEN FRAME SWITCHING POWER SUPPLIES 60-62 WATTS SINGLE, DUAL & TRIPLE OUTPUT HVI63 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT COMPACT 4”x2”x1”PCB FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range typical 90-264Vac. Rating 100 to 240Vac. Input Connector: Molex connector or equivalent Input Frequency: 47-63Hz. Inrush Current: ≤12.0A rms at cold start at 230Vac. Input Current: Typical 0.9A at 115Vac, Typical 0.435A at 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typical 11.2mS at 115Vac, Typical 72.mS at 230Vac. Leakage Current: Less than 0.42mA at 230Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: Molex connector or equivalent. Output Wattage: Typical 60-62 watts. Line Regulation: Typical 0.1%. Load Regulation: Main VO1 typical ±1.0%. Aux. VO2 typical ±3-8.0%. Aux. VO3 typical ±3.0%. Noise & Ripple: Typical 1.0% peak to peak. OVP: Built-in at main output VO1(Latch). Adjustability: Not available. Overload Protection (OLP): Fully protected against outputs overload and short circuit. Typical OLP set at 105-120% of rating output power. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typical 80-89.5%. (Various with output voltage) Switching Frequency: 130KHz or 70KHz. Circuit Topology: Fixed frequency forward circuit for triple output and 5V/3.3V of single output. Fixed Frequency Flyback circuit for high voltage of single output. Transient Response: Output voltage returns in less than 0.5mS following a 50% load change. Safety Standard: Meet IEC 60950-1 Class I. Power Density: 7.5-7.7Watts / Cubic Inch. Operating Temperature: 0 to +50 °C under forced air flow for full load. Derate by 1.3W/°C from 40°C to 50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typical 0.04%/°C. Cooling: At least 5CFM direct forward air flow is required to achieve full rating power. Construction: 4”x2”x1” PCB format. NOTE: (1)All measurement are at nominal input, full load and +25°C unless otherwise specifications. (2)Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory -65- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. DUAL OUTPUT MAIN VO1 ★ Min. Typ. Volt. Max. MODEL NO. Peak HVI63-S033100 0.2A 10.00A 3.3V 10.00A 12.0A HVI63-S050100 0.2A 10.00A 5.0V 10.00A 12.0A HVI63-S120050 0.0A 5.00A 12.0V 5.00A 6.0A HVI63-S150040 0.0A 4.00A 15.0V 4.00A 5.0A HVI63-S240025 0.0A 2.50A 24.0V 2.50A 3.0A HVI63-S480125 0.0A 1.25A 48.0V 1.25A 1.3A HVI63-D051I MAIN +VO1 ★ Min. Typ. 0.5A 4.0A AUX. +VO2 ■ Volt. Min. Typ. Volt. +5.1V 0.2A 3.5A +12V TRIPLE OUTPUT MODEL NO. MAIN +VO1 ★ Min. Typ. HVI63-T050II 0.5A HVI63-T050MI AUX. +VO2 ■ AUX. -VO3 ■ Max. Peak Min. Typ. Volt. Max. Peak Min. Typ. Volt. Max. Peak 6.0A +5.0V 8A 10A 0.1A 2.2A +12V 3.0A 4A 0A 0.5A -12V 0.5A 1A 0.5A 6.0A +5.0V 8A 10A 0.1A 1.1A +24V 1.5A 2A 0A 0.5A -12V 0.5A 1A HVI63-T050KK 0.5A 6.0A +5.0V 8A 10A 0.1A 1.8A +15V 2.5A 3A 0A 0.5A -15V 0.5A 1A 0.5A 8.0A +3.3V 8A 10A 0.1A 3.0A + 5V 3.0A 4A 0A 0.5A -12V 0.5A 1A HVI63-T033EI Symbol: "★" OVP built-in. Volt. "■" Couple common choke. MECHANICAL DIMENSIONS: MM [INCHES] SINGLE OUTPUT WEIGHT: 121g (4.27 Oz.) DUAL/TRIPLE OUTPUT INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-L AC-N AC-G P1-L P1-N G CNTR/PIN# Mating connector: P1,2 Molex # 5195 or 5239 series. SINGLE OUTPUT VO1 DC COM P2-1,2 P2-3,4 -66- VO1 P2-1,2 DUAL/TRIPLE OUTPUT VO2 VO3 P2-6 P2-5 DC COM P2-3,4