Leaded Oscillator, OCXO Metal Package, Full Size DIP I401 Series I401 Package Product Features: Applications: Available in Both Sinewave and HCMOS/TTL Compatible outputs RoHS Compliant Telecommunications Data Communications Instrumentation Test and Measurement Frequency 20.7 4 3 1 2 12.6 1.000 MHz to 50.000 MHz 10 Max. 6 Min. Output Level HC-MOS TTL Sine ‘0’ = 0.1 Vcc Max., ‘1’ = 4.5 VDC Min. ‘0’ = 0.4 VDC Max., ‘1’ = 2.4 VDC Min. +4dBm, ±3dBm Duty Cycle 50% ±10% or ±5% See Table Rise / Fall Time 10 nS Max. Output Load HC-MOS TTL Sine See Output Table 15 pF 50 ohms Frequency Stability See Frequency Stability Table Supply Voltage See Supply Voltage Table Current (Warm Up) Current @ 25 C 400 mA @ 5 VDC, 170 mA @ 12 VDC Max. 120 mA @ 5 VDC, 60 mA @ 12 VDC Typ. Control Voltage 2.5 VDC ±2.0 VDC, ±8 ppm Min. Slope Positive Pin Connection 1 Control Voltage 2 GND 3 Output 4 Vcc Operating See Operating Temperature Table in Part Number Guide Dimension Units: mm Storage -55 C to +125 C 0.048 0.86 7.62 15.24 Part NumberGuide Package Input Voltage Sample Part Number: I401-5151YV-20.000 MHz Operating Temperature Symmetry (Duty Cycle) Output 3 = 3.3 V 7 = 0 C to +50 C 5 = 45 / 55 Max. 1 = 10 TTL / 15pF HC-MOS N = 1.0 V = Controlled 5 = 5.0 V 1 = 0 C to +70 C 6 = 40 /60 Max. 3 = 15pF HC-MOS Y = 0.5 F = Fixed 9 = 12 V 6 = -10 C to +75 C 6 = 30pF 1 = 0.25 3 = -20 C to +70 C A = Sine 2 = 0.1 I401 - Frequency Stability (in ppm) Voltage Control Frequency -20.000 MHz 3 = 0.05* NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise. * Frequency, supply, and load related parameters. ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 01/11_C Specifications subject to change without notice Page 1 Leaded Oscillator, OCXO Metal Package, Full Size DIP I401 Series Pb Free Solder Reflow Profile: Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e1 (Sn / Cu / Ag over Ni over Kovar base metal). Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI and Date Code Line 2: XXXXXX (Part Number detail = I401-XXXXXX-Freq.) Line 2: Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 01/11_C Specifications subject to change without notice Page 2