POLYFUSE® Resettable PTCs Surface Mount > 2016L Series 2016L Series Description The 2016L Series device provides surface mount overcurrent protection for low voltage (≤60V) applications where resettable protection is desired. Features Agency Approvals Applications AGENCY t*&&QPSUQSPUFDUJPO t1PXFSFEFUIFSOFUQPSU protection (IEEE 802.3 af) t"VUPNPUJWFFMFDUSPOJD control module protection AGENCY FILE NUMBER E183209 R50119118 2016L Series t)JHIWPMUBHF t-PXQSPmMF t3P)4DPNQMJBOUBOE lead-free t'BTUSFTQPOTFUPGBVMU currents t-PXWPMUBHFUFMFDPN equipment protection Electrical Characteristics I trip (A) V max (Vdc) I max (A) Pd max. (W) Part Number Marking I hold (A) 2016L030 LF030 0.30 0.60 60 20 2016L050 LF050 0.55 1.10 60 20 Maximum Time To Trip Agency Approvals Resistance Current (A) Time (Sec.) R min (Ω) R typ (Ω) R 1max (Ω) 1.40 1.50 3.00 0.500 1.400 2.300 X X 1.40 2.50 5.00 0.200 0.700 1.000 X X X 2016L100 LF100 1.10 2.20 15 40 1.40 8.00 0.50 0.100 0.250 0.400 X 2016L100/33 LF100-33 1.10 2.20 33 40 1.40 8.00 0.50 0.100 0.250 0.400 X X X X 2016L150 LF150 1.50 3.00 15 40 1.40 8.00 1.00 0.070 0.130 0.180 X 2016L200 LF200 2.00 4.20 6 40 1.40 8.00 3.00 0.048 0.070 0.100 X I hold = Hold current: maximum current device will pass without tripping in 20°C still air. R typ = Typical resistance of device in initial (un-soldered) state. I trip = Trip current: minimum current at which the device will trip in 20°C still air. R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec. V max = Maximum voltage device can withstand without damage at rated current (I max) I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) P d = Power dissipated from device when in the tripped state at 20°C still air. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. R min = Minimum resistance of device in initial (un-soldered) state. ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/2016L.html for current information. Revised: October 24, 2008 2016L Series POLYFUSE® Resettable PTCs Surface Mount > 2016L Series Temperature Rerating Ambient Operation Temperature -40°C -20°C 0°C 23°C 2016L030 0.45 0.40 0.35 0.30 2016L050 0.93 0.80 0.65 0.50 50°C 60°C 70°C 85°C 0.25 0.23 0.20 0.18 0.14 0.38 0.32 0.25 0.19 0.09 Hold Current (A) Part Number 2016L100 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50 2016L100/33 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50 2016L150 2.26 2.00 1.76 1.50 1.24 1.13 1.00 0.87 0.68 2016L200 2.80 2.50 2.19 2.00 1.84 1.74 1.50 1.34 1.14 Temperature Rerating Curve 0.16A 0.30A 1.00A/33v 1.00A 1.50A 2.00A Average Time Current Curves 170% 2016L 10000 1000 Percentage of Rated Current 150% 100000 Time in Seconds 40°C B 130% A 110% 90% 70% A Line/Part Number: 50% 30% A 2106L030 2106L050 2106L100 B 2106L100\33 2016L150 2016L200 B 10% 100 -40 -30 -20 -10 0 10 20 30 40 Temperature (°C) 50 60 70 80 85 10 1 0.1 0.01 0.1 1 10 100 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. 2016L Series Revised: October 24, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/2016L.html for current information. POLYFUSE® Resettable PTCs Surface Mount > 2016L Series Soldering Parameters Reflow Peak Temp/ Duration Time 260°C / 10 Sec Time above liquids (TAL) 220°C 60 Sec ~ 100 Sec Preheat 120°C~ 180°C 50 Sec ~ 150 Sec 0°C~35°C, < =70%RH t3FDPNNFOEFESFnPXNFUIPET*3WBQPSQIBTFPWFOIPUBJS oven, N2 environment for lead–free t3FDPNNFOEFENBYJNVNQBTUFUIJDLOFTTJTNNJODI t%FWJDFTDBOCFDMFBOFEVTJOHTUBOEBSEJOEVTUSZNFUIPETBOE solvents. Note: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. Physical Specifications Cooling 220 Temperature (°C) Storage Condition Soldering 260 Preheating 180 120 0 50 to 150 60 to 100 2016L Series Condition 120 Time(s) Environmental Specifications Terminal Material Solder-Plated Copper (Solder Material: Matte Tin(Sn)) Operating/Storage Temperature -40°C to +85°C Lead Solderability Meets EIA Specification RS186-9E, ANSI/ J-STD-002 Category 3. Maximum Device Surface Temperature in Tripped State 125°C Passive Aging +85°C, 1000 hours -/+5% typical resistance change Humidity Aging +85°C, 85%,R.H.,1000 hours -/+5% typical resistance change Thermal Shock MIL–STD–202, Method 107G +85°C/-40°C 20 times -30% typical resistance change Solvent Resistance MIL–STD–202, Method 215 No change Vibration MIL–STD–883C, Method 2007.1, Condition A No change Moisture Sensitivity Level Level 2, J–STD–020C ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/2016L.html for current information. Revised: October 24, 2008 2016L Series POLYFUSE® Resettable PTCs Surface Mount > 2016L Series Dimensions (mm) MARKING CODE VARIES WITH AMPERAGE AND VOLTAGE RATING SEE ELECTRICAL CHARACTERISTICS CHART SHOWN ARE: - 1.1A/15V RATING (LEFT) - 1.1A/33V RATING (RIGHT) C A Top View 100 Bottom View 100 100 -33 B 3.40 mm (.133”) Pad Layout D Side View E 4.60 mm (.181”) 1.50 mm (.059”) A Part Number B Inches mm C Inches mm Inches D mm E Inches mm Inches mm Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Min. Min Max. Min. Max. 2016L030 0.19 0.21 4.72 5.44 0.15 0.17 3.7 4.43 0.03 0.05 0.75 1.25 0.01 0.30 0.01 0.03 0.25 2016L050 0.19 0.21 4.72 5.44 0.15 0.17 3.7 4.43 0.05 0.08 1.2 2 0.01 0.30 0.01 0.03 0.25 0.65 2016L100 0.19 0.21 4.72 5.44 0.15 0.17 3.7 4.43 0.02 0.03 0.5 0.75 0.01 0.30 0.01 0.03 0.25 0.65 2016L100/33 0.19 0.21 4.72 5.44 0.15 0.17 3.7 4.43 0.03 0.05 0.75 1.25 0.01 0.30 0.01 0.03 0.25 0.65 2016L150 0.19 0.21 4.72 5.44 0.15 0.17 3.7 4.43 0.03 0.06 0.75 1.55 0.01 0.30 0.01 0.03 0.25 0.65 2016L200 0.19 0.21 4.72 5.44 0.15 0.17 3.7 4.43 0.02 0.03 0.5 0.75 0.01 0.30 0.01 0.03 0.25 0.65 0.65 Part Ordering Number System 2016 L 100 /33 D R PACKAGING STYLE R: Tape & Reel SERIES QUANTITY CODE: D=1500 M=1000 P=2000 /XX: SPECIAL VOLTAGE RATING (NOT APPLICABLE TO ALL PARTS) I HOLD CURRENT CODE (SEE TABLE BELOW) L: LITTELFUSE SURFACE MOUNT PPTC SIZE Packaging Part Number Ordering Number I hold (A) I hold Code Voltage Option Packaging Option Quantity Quantity & Packaging Codes 2016L030 2016L030DR 0.30 030 Tape and Reel 1500 DR 2016L050 2016L050MR 0.55 050 Tape and Reel 1000 MR Tape and Reel 2000 PR Tape and Reel 1500 DR 2016L100 2016L100PR 1.10 110 2016L100/33 2016L100/33DR 1.10 110 2016L150 2016L150DR 1.50 150 Tape and Reel 1500 DR 2016L200 2016L200PR 2.00 200 Tape and Reel 2000 PR 2016L Series /33 Revised: October 24, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/2016L.html for current information. POLYFUSE® Resettable PTCs Surface Mount > 2016L Series Tape and Reel Specifications TAPE SPECIFICATIONS: EIA-481-1 (mm) 2016L030 2016L100/33 2016L150 REEL DIMENSIONS: EIA-481-1 (mm) 2016L050 W 12.0+/- 0.30 12.0+/- 0.30 12.0+/- 0.30 H 12.0+/- 0.05 F 5.50+/- 0.05 5.50+/- 0.05 5.50+/- 0.05 W 9.0+/- 0.5 E1 1.75+/- 0.10 1.75+/- 0.10 1.75+/- 0.10 D Ø 60+0.5 D0 1.55+/- 0.05 1.55+/- 0.05 1.55+/- 0.05 F Ø13.0+/- 0.2 D1 1.50 (MIN) 1.50 (MIN) 1.50 (MIN) C Ø178+/- 1.0 P0 4.0+/- 0.10 4.0+/- 0.10 4.0+/- 0.10 H1 11+/- 0.5 P1 8.0+/- 0.10 8.0+/- 0.10 8.0+/- 0.10 W1 2.2+/- 0.5 P2 2.0+/- 0.05 2.0+/- 0.05 2.0+/- 0.05 W2 3.0+0.5 A0 4.40+/- 0.10 4.48+/- 0.10 4.45+/- 0.10 W3 4.0+0.5 B0 5.50+/- 0.10 5.40+/- 0.10 5.48+/- 0.10 W4 5.5+0.5 T 0.25+/- 0.10 0.25+/- 0.10 0.25+/- 0.10 KO 0.80+/- 0.10 1.36+/- 0.10 1.86+/- 0.10 Leader Min. 390 390 390 Trailer Min. 160 160 160 2016L Series 2016L100 2016L200 Tape and Reel Diagram H P1 P2 D0 E1 P0 W4 W3 D F W T W2 W F D2 C W1 A0 K0 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/2016L.html for current information. H1 B0 Revised: October 24, 2008 2016L Series