IPT Series Bayonet Lock Connectors IPT 01 A...PHM_ _ In-Line Receptacle Connector with PHM Backshell and Sleeves to Accommodate Various Cable Sizes IPT 01 A 18-11 S Z C PHM11 XX MIL-C-26482 Series l Type Mod Code Options See Table II 01 - In-Line Receptacle PHM Thread Size See Table I Connector Class A - Non-Environmental Contact Type C - Crimp (Omit for Solder Cup) Shell Size and Insert Arrangements Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Contact Gender P - Pin S - Socket B C G APPLICATION NOTES 1. In-line receptacle with a PHM backshell that assures an excellent mechanical and waterproof seal to IP65 when used with correct neoprene sealing bushing. Rubber sleeves included to allow use of different diameter cables. 2. Connector Class “A” (non-environmental)—no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-44 www.glenair.com IPT Series Bayonet Lock Connectors IPT 01 A...PHM_ _ In-Line Receptacle Connector with PHM Backshell and Sleeves to Accommodate Various Cable Sizes TABLE I: DIMENSIONS P.N. PHM B min. - max. C Max. G ±0.1 L Max. 8 11 2-7 15 17.3 47 10 11 2-9 21 21.8 49 Shell size 12 11 2 - 11 24 25.1 58 14 11 2 - 11 24 28.6 58 16 11 2 - 11 24 30.6 58 18 11 / 18 2 - 11 / 9 - 16.5 42 33.2 75 20 18 9 - 16.5 42 36.5 75 22 18 9 - 16.5 42 39.6 75 24 18 / 22 / 24 9 - 16.5 / 15 - 20 / 19 - 24 42 43.1 75 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance © 2008 Glenair, Inc. -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good Very Good NO Very Good Very Good Good Very Good Very Good Good Good U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-45 www.glenair.com