Ordering number : EN1831E Monolithic Digital IC LB1205 High-Voltage, Large-Current Darlington Driver Overview The LB1205 is a 4-unit, high withstand voltage (65V), large-current (1.5A) Darlington driver array with input low active configuration and sync output. Features • 4-unit, high withstand voltage design (65V), large-current (1.5A) Darlington driver. • PNP input type (low active). • On-chip spark killer diodes. • On-chip input protection diodes. • Capable of being driven directly from 5V operated CMOS, TTL. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Maximum supply voltage VDD max 7.0 V VCC max 62 V Output supply voltage VO max 65 V Input supply voltage VIN max VDD-7.0 to VDD-10.0 V Output current IO max 1.5 A Spark killer diode forward current IFS 1.5 A Allowable power dissipation Pd max Independent IC 1.9 W Mounted on the recommended PCB 2.6 W VIN ≥ GND Operating temperature Topr -20 to +75 °C Storage temperature Tstg -55 to +150 °C Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. O0808 MS / O1995YK / 7097KI / 6265KI / D203KI, TS No.1831-1/3 LB1205 Allowable Operating Conditions at Ta = 25°C Parameter Symbol Conditions Supply voltage range VDD Input “ON” level voltage VINon VIN ≥ GND, IO = 1.0A Input “OFF” level voltage VINoff IO ≤ 30µA Ratings Unit 3.5 to 7.0 V VDD-7.0 to VDD-2.6 V VDD-0.3 to VDD+10.0 V Electrical Characteristics at Ta = 25°C, VDD = 5V Parameter Symbol Ratings Conditions min Output saturation voltage Output sustain voltage Unit typ max VOsat1 VIN = VDD-5.0V, IO = 0.5A 1.2 VOsat2 VIN = VDD-5.0V, IO = 1.0A 1.5 V VOsat3 VIN = VDD-5.0V, IO = 1.5A 2.0 V VOsus IO = 100mA 65 V V Input current IIN VDD = 7.0V, VIN = VDD-7.0V 1.0 Spark killer diode forward voltage VFS IFS = 1.5A 3.0 mA V Spark killer diode reverse current IRS VCC = 62V, VO = 0V 30 µA Package Dimensions unit : mm (typ) 3054B Pd max -- Ta 19.0 16 0.4 7.62 6.45 9 1 8 (0.61) 2.54 0.5 0.51min (3.46) 1.25 4.26max 1.65 3.5 1.3 Allowable power dissipation, Pd max -- W 3.0 2.6 2.5 2.0 1.9 Mounted on the recommended PCB Independent IC 1.56 1.5 1.14 1.0 0.5 0 -20 0 20 40 60 75 80 100 Ambient temperature, Ta -- °C SANYO : DIP16F(300mil) Pin Assignment OUT4 IN4 16 15 Recommended PCB VDD GND GND IN3 OUT3 VCC 14 13 12 11 10 9 1 2 3 4 5 6 VCC OUT1 IN1 GND GND IN2 Cu-foiled (GND) 3cm2 7 8 NC OUT2 Top view 80×60mm2 Note: VCC (pins 1 and 9) is shorted internally. No.1831-2/3 LB1205 Equivalent Circuit OUT1 OUT2 OUT3 OUT4 VCC 2kΩ 8kΩ 20kΩ 1.25kΩ 13kΩ VDD GND IN1 IN3 IN4 VOsat -- IO 10 Output saturation voltage, VOsat -- V IN2 7 5 3 2 1.0 7 5 7 0.1 2 3 5 7 1.0 2 3 Output current, IO -- A SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of October, 2008. Specifications and information herein are subject to change without notice. PS No.1831-3/3