C&K LP Series Miniature Snap-in Slide Switches Features/Benefits • 6 to 11 AMPS available • Easy assembly—Snap-in mounting • Contamination resistant—extended actuator • Positive detent • RoHS compliant Typical Applications • Small appliances • Outdoor appliances • Portable tools Models Available Slide J Specifications Materials CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). (LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA). See page I-27 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. OPERATING TEMPERATURE: -30ºC to +65ºC STORAGE TEMPERATURE: -30ºC to +85ºC HOUSING: 6/6 nylon (UL94V-2), black. ACTUATOR: Glass filled acetal, UV and petroleum resistant, black. CONTACTS: Q contact material: Copper, silver plated. See page I-27 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page I-27 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J–25 and J–26. For additional options not shown in catalog, consult Customer Service Center. Switch Function LP22 DPDT, 6 AMP LP02 SPDT, 6 AMP LP81 DPST, 11 AMP LP82 DPDT, 11 AMP Actuator C2 Black cap C1 Whitecap C3 Red cap Detent 1 With detent Mounting Style T2 Snap-in panel with tabs (D, L, N markings only) Terminations 03 Solder lug with hole Housing Markings NONE No markings D ON-OFF Contact Material Q Silver B Gold Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–24 www.ittcannon.com C&K LP Series Miniature Snap-in Slide Switches SWITCH FUNCTION NO. POLES MODEL NO. LP02 SP AMP RATING* SWITCH FUNCTION 6 SPDT NO. POLES SCHEMATIC MODEL NO. AMP RATING* SWITCH FUNCTION LP22 6 DPDT LP81 11 DPST LP82 11 DPDT SCHEMATIC DP All models with all options when ordered with ‘Q’ contact material. Contacts make on side actuator thrown. * For complete contact ratings, see CONTACT MATERIALS Section, page J-26. J Slide Terminal Nos. For Reference Only Part number shown: LP22C21S203Q ACTUATOR C1; C2; C3 OPTION CODE2 ACTUATOR CAP COLOR C2 BLACK C1 WHITE C3 RED NOTE: Actuator finish: gloss. Other colors available, consult Customer Service Center. DETENT 1 WITH DETENT MOUNTING STYLE T2 SNAP-IN PANEL WITH TABS PANEL THICKNESS DIM ‘A’ .030–.045 (0,76) (1,14) .578 (14,68) .046–.059 (1,17) (1,50) .585 (14,86) .060–.089 (1,52) (2,26) .598 (15,19) .090–.120 (2,29) (3,05) .610 (15,49) Mounting style T2 suitable for markings. See HOUSING MARKINGS options. PANEL MOUNTING DIM. ‘A’ Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–25 www.ittcannon.com C&K LP Series Miniature Snap-in Slide Switches TERMINATIONS 03 SOLDER LUG WITH HOLE HOUSING MARKINGS J Slide NONE D NO MARKINGS ON-OFF Orientation of actuator and terminals. NOTE: Housing markings are available with ‘T2’ mounting style only. The marking color on all housings with marking options ‘D’ is white, standard. Other marking colors are available, consult Customer Service Center. CONTACT MATERIAL OPTION CODE RoHS COMPLIANT RoHS COMPLIANT CONTACT MATERIAL Q YES YES SILVER 2 B YES YES GOLD 1 RATINGS POWER LP0X, LP2X MODELS: 6 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). LP7X, LP8X MODELS: 11 AMPS @ 125/250 V AC (UL/CSA). LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @20 V AC OR DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. 2 All models with all when ordered with ‘Q’ contact material. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–26 www.ittcannon.com