COILCRAFT LPS3010

Document 428-1
Shielded Power Inductors – LPS3010
• Ultra small 3.0 × 3.0 mm footprint; less than 1.0 mm tall
• Very low DCR; excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 25 – 32 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
Isat (A)5 Irms (A)6
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C40°C
Part number1 ±20% (µH) (Ohms)(MHz) drop drop drop rise rise
LPS3010-471ML_
LPS3010-681ML_
LPS3010-102ML_
LPS3010-152ML_
LPS3010-182ML_
0.47 0.070
3701.81.92.01.31.80
0.68 0.080
2701.61.71.71.31.75
1.0 0.085
2301.51.61.61.11.50
1.5 0.120
1651.31.41.41.05
1.40
1.8 0.150
1501.21.21.31.00
1.40
LPS3010-222ML_
LPS3010-332ML_
LPS3010-472ML_
LPS3010-562ML_
LPS3010-682ML_
2.2
3.3
4.7
5.6
6.8
LPS3010-822ML_
LPS3010-103ML_
LPS3010-123ML_
LPS3010-153ML_
LPS3010-183ML_
8.2
10
12
15
18
0.220
1301.31.41.40.90
1.10
0.220110 0.830.880.900.851.10
0.300 92 0.720.750.770.700.95
0.400 80 0.670.690.710.600.78
0.450 70 0.610.630.640.560.74
0.520
0.540
0.700
0.950
1.10
62 0.560.590.590.530.70
58 0.500.530.550.480.64
47 0.460.490.500.440.58
43 0.410.430.440.370.48
40 0.380.400.410.330.47
LPS3010-223ML_ 22
LPS3010-333ML_ 33
LPS3010-473ML_ 47
LPS3010-683ML_ 68
LPS3010-104ML_100
1.20
2.00
3.20
3.50
5.25
36 0.320.350.360.300.41
27 0.250.270.280.260.35
21 0.230.240.250.220.31
21 0.200.210.220.200.28
14 0.140.160.170.180.24
LPS3010-124ML_120
LPS3010-154ML_150
LPS3010-184ML_180
LPS3010-224ML_220
LPS3010-334ML_ 330
6.10
9.15
10.1
12.5
18.5
12 0.130.150.150.140.19
11 0.130.140.140.130.17
9 0.110.120.130.110.15
8 0.100.110.120.095
0.13
7 0.10 0.1050.1150.0850.11
1. Please specify termination and packaging codes:
LPS3010-223MLC
Termination:L=RoHS compliant silver-palladiumplatinum-glass frit.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tinlead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or
equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
• Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH
to 33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples
of 220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents
and to order, contact Coilcraft or visit http://order.coilcraft.com.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 428-1 Revised 11/22/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 428-2
Shielded SMT Power Inductors – LPS3010 Series
L vs Frequency
L vs Current
1000
1000
330 µH
100
68 µH
Inductance (µH)
Inductance (µH)
330 µH
33 µH
6.8 µH
10
3.3 µH
1
0.1
0.68 µH
0.01
0.1
1
10
Frequency (MHz)
Typical Current Derating
100
68 µH
33 µH
6.8 µH
10
3.3 µH
1
0.1
0.68 µH
0.01
0.1
Current (A)
1
10
0.116 ±0.003*
2,95 ±0,076
120
0.116 ±0.003*
2,95 ±0,076
100
123X
90
80
70
Dash
number
60
Winding
direction
Internal
code
Recommended
Land Pattern
50
0.035 ±0.004 **
0,9 ±0,1
40
30
20
25°C
Percent of rated Current
110
Isat
Irms
10
0
-40
-20
0
20
40
60
80
100
120 140
0.020
0,51
0.045
1,14
0.025
0,64
Ambient temperature (°C)
0.035
0,89
0.130
3,30
0.040
1,02
are of the case not
* Dimensions
including the termination. For maximum
overall dimensions including the
termination, add 0.005 in / 0,13 mm.
0.130
3,30
**For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
Dimensions are in
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 428-2 Revised 11/22/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.