COILCRAFT LPS6225

Document 554-1
Shielded Power Inductors – LPS6225
• Low DCR; high current; shielded construction
• Perfect for backlight applications
Designer’s Kit C349 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 309 – 331 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5 Irms (A)6
DCR SRF
2
3
4
Inductance max typ 10% 20% 30% 20°C40°C
Part number1 ± 20% (µH)(Ohms) (MHz) drop drop drop rise rise
LPS6225-122ML_
LPS6225-222ML_
LPS6225-332ML_
LPS6225-472ML_
LPS6225-682ML_
LPS6225-103ML_
LPS6225-153ML_
LPS6225-223ML_
LPS6225-333ML_
LPS6225-473ML_
LPS6225-683ML_
LPS6225-104ML_
LPS6225-124ML_
LPS6225-154ML_
LPS6225-224ML_
1.2
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
120
150
220
LPS6225-334ML_ 330
LPS6225-474ML_ 470
LPS6225-684ML_ 680
LPS6225-105ML_1000
LPS6225-155ML_1500
0.040
1785.35.45.41.11.65
0.045
1003.94.04.11.01.40
0.055
683.53.53.61.01.35
0.065
533.03.13.20.90
1.30
0.095
402.62.72.80.90
1.30
0.105
352.12.12.20.90
1.30
0.135
232.12.22.20.85
1.20
0.175
171.41.51.60.80
1.10
0.260
141.11.21.20.65
0.90
0.360
100.98
1.01.00.60
0.80
0.420
0.610
0.750
0.920
1.30
9.60.580.610.620.570.74
7.70.480.510.520.470.64
7.40.420.450.460.430.58
6.40.390.410.420.400.54
5.00.320.340.350.370.50
2.00
2.60
4.00
6.00
9.00
3.80.260.270.280.280.39
3.20.220.230.240.240.37
2.80.180.190.200.180.26
2.30.150.160.170.150.24
1.80.120.130.130.130.20
LPS6225-185ML_1800
LPS6225-225ML_2200
LPS6225-335ML_3300
LPS6225-475ML_ 4700
LPS6225-565ML_ 5600
11.7
13.5
21.0
30.0
36.0
1.70.110.120.120.110.14
1.30.100.100.110.110.13
1.10.099
0.100.110.080
0.11
0.900.0860.0960.10 0.0750.090
0.720.0830.0900.0960.0700.090
LPS6225-685ML_ 6800
LPS6225-825ML_ 8200
LPS6225-106ML_10000
43.0
54.0
70.0
0.700.0800.0860.0890.0650.080
0.690.0790.0860.0880.0600.075
0.680.0750.0840.0870.0600.065
1. Please specify termination and packaging codes:
LPS6225-106MLC
Termination:L=RoHS compliant silver-palladiumplatinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (2500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 554-1 Revised 12/01/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 554-2
Shielded SMT Power Inductors – LPS6225 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1
0.01
1000 µH
1000
Inductance (µH)
1000
Inductance (µH)
3300 µH
0.1
Current (A)
1
10
Current Derating
330 µH
100 µH
100
33 µH
10 µH
10
1
0.01
10
Frequency (MHz)
0.236 ±0.003*
6,00 ±0,076
120
110
100
XXX X
90
80
70
Dash
number
60
0.236 ±0.003 *
6,00 ±0,076
Winding
direction
Internal
code
50
0.094 ±0.004**
2,40 ± 0,10
40
30
20
10
0
25°C
Percent of rated current
1
0.1
Isat
Irms
-40
-20
0
20
Recommended
Land Pattern
0.079
2,00
40
60
80
100
0.165
4,20
120 140
Ambient temperature (°C)
0.039 typ
1,00
0.260 0.167
6,60 4,25
0.039 typ
1,00
are of the case not
* Dimensions
including the termination. For maximum
overall dimensions including the
termination, add 0.005 in / 0,13 mm.
0.165
4,20
0.071
1,80
0.079
2,00
0.167
4,25
0.260
6,60
**For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Dimensions are in
inches
mm
Document 554-2 Revised 12/01/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.