Quarter-Brick Series Dual output DC/DC CONVERTERS High Current, High Efficiency, Low Profile 1 NEW Product • • • • • • • • • • Two independent outputs High full load efficiency Wide ambient temperature range of -40 ºC to +85 ºC Up to 100% load imbalance Tracking, monotonic start-up Starts into pre-biased outputs Basic insulation system Over-voltage and over-temperature protection 100 V, 100 ms input voltage transient response Secondary side control, no optocouplers, fast transient load response • Available RoHS compliant These are new high efficiency, open-frame, isolated 40 A converters in an industry standard dual quarter-brick footprint. These converters deliver high output current at low voltages, and excellent useable power density for today’s high end applications. This series features an input voltage range of 36 Vdc to 75 Vdc and output voltages of 1.2 V/3.3 V, 1.5 V/3.3 V, 1.8 V/3.3 V 2.5 V/3.3 V, and 5 V/3.3 V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies are 90%. This series also has a remote ON/OFF capability. Over-current and over-voltage protection features are included as standard. Designed to meet international safety agency approvals, including EN60950-1 and UL/cUL60950, this series reduces compliance costs and time to market. Patent No. 6,765,810 Other Patents Pending 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 °C ambient unless otherwise stated EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage adjustability Both outputs ±10% min. Minimum load Both outputs 0% Ripple and noise 20 MHz bandwidth 50 mV pk-pk max. 15 mV rms max. Short circuit protection Turn-on characteristics Both outputs Both outputs Monotonic INPUT SPECIFICATIONS Input voltage range Input current 48 V nominal 36-75 Vdc No load Remote OFF Active high remote ON/OFF Logic compatibility ON OFF 80 mA max. 6 mA max. Immunity: ESD air enclosure Radiated field enclosure Conducted Input transients EN61000-4-2 8 kV/6 kV(O/P within spec.) EN61000-4-3 10 V/m (O/P within spec.) EN61000-4-6 10 V (O/P within spec.) 100 V, 100 ms GENERAL SPECIFICATIONS Efficiency See table Basic insulation Input/output Switching frequency Fixed Approvals and standards (See Notes 1 and 2) 480 kHz Material flammability Open collector ref to -input Open circuit or >2.4 Vdc <0.4 Vdc Undervoltage lockout Power up Power down 35.5 V (typ.) 33.5 V (typ.) Start-up time Power up Remote ON/OFF 14 ms (typ.) 14 ms (typ.) EN60950-1 VDE UL/cUL 60950 UL94V-0 Weight MTBF 2250 Vdc 34 g (1.2 oz) Telcordia Tech SR-332 2,883,816 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient., temperature Non-operating -40 °C to +85 °C -55 °C to +125 °C PROTECTION Short-circuit Continuous Overvoltage Non-latching Thermal 125 ºC hot spot temperature with automatic recovery International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950 File No. E135734/60950 VDE Certificate No. 10401-3336-0197 File Name: quarter_brick_dual.pdf Rev (01): 29 Mar 2006 Quarter-Brick Series Dual output DC/DC CONVERTERS High Current, High Efficiency, Low Profile 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT VOLTAGE NOMINAL 1 2 INITIAL SET POINT 1 (3) 2 REGULATION BAND 1 NEW Product OUTPUT OVP EFFICIENCY CURRENT TRIP POINT (TYP.) MODEL NUMBER (4,5) 2 1 2 1 2 QUARTER-BRICK DUAL OUTPUT PERFORMANCE MODELS 1.2 V 3.3 V 1.18-1.22 V 3.25-3.35 V 1.16-1.24 V 3.2-3.4 V 20 A 20 A 1.5 V 4V 90.0% LQD40A48-3V3-1V2J 1.5 V 3.3 V 1.48-1.55 V 3.25-3.35 V 1.44-1.55 V 3.2-3.4 V 20 A 20 A 1.8 V 4V 90.5% LQD40A48-3V3-1V5J 1.8 V 3.3 V 1.77-1.83 V 3.25-3.35 V 1.75-1.85 V 3.2-3.4 V 20 A 20 A 2V 4V 90.5% LQD40A48-3V3-1V8J 2.5 V 3.3 V 2.46-2.54 V 3.25-3.35 V 2.42-2.58 V 3.2-3.4 V 20 A 20 A 3V 4V 90.5% LQD40A48-3V3-2V5J QUARTER-BRICK DUAL OUTPUT VALUE MODELS 1.2 V 3.3 V 1.18-1.22 V 3.25-3.35 V 1.16-1.24 V 3.2-3.4 V 15 A 15 A 1.5 V 4V 90.0% LQD30A48-3V3-1V2J 1.5 V 3.3 V 1.48-1.52 V 3.25-3.35 V 1.44-1.55 V 3.2-3.4 V 15 A 15 A 1.8 V 4V 90.5% LQD30A48-3V3-1V5J 1.8 V 3.3 V 1.77-1.83 V 3.25-3.35 V 1.75-1.85 V 3.2-3.4 V 15 A 15 A 2V 4V 90.5% LQD30A48-3V3-1V8J 2.5 V 3.3 V 2.46-2.54 V 3.25-3.35 V 2.42-2.58 V 3.2-3.4 V 15 A 15 A 3V 4V 91.0% LQD30A48-3V3-2V5J 3.3 V 3.25-3.35 V 4.92-5.08 V 3.20-3.40 V 4.85-5.15 V 15 A 10 A 4V 6V 91.0% LQD25A48-5V0-3V3J 5V Part Number System with Options L Q D 4 0 A 4 8 - 3 V 3 - 1 V 8 R A N J (5) RoHS Compliance (4) J = Pb-free (RoHS 6/6 compliant) L = Low Profile Q = 1/4 Brick Pin Length Options Blank = 0.188” (4.78 mm) N = 0.145” (3.68 mm) K = 0.110” (2.79 mm) Number of Outputs D = Dual Body Height and Package Type A = 0.300” (7.62 mm), Through-Hole, E = 0.340” (8.64 mm), Through-Hole, S = 0.285” (7.24 mm), Surface-Mount Rated Output Current (Sum of all outputs) 40 A = 40 Amps Nominal Rated Input Voltage 48 = 48 Volts (36 V to 75 V Range) Remote ON/OFF Logic No Suffix = Positive Suffix ‘R’ = Negative Output Voltage of V2 3V3 = 3.3 Volts Output Voltage of V1 1V8 = 1.8 Volts, 1V2 = 1.2 Volts etc. Notes 1 2 User must provide recommended fuses in order to comply with safety approvals. See Application Note 137. Maximum continuous output power. 90 Watts for LQD40A48-3V3-1V2J models 96 Watts for LQD40A48-3V3-1V5J models 102 Watts for LQD40A48-3V3-1V8J models 116 Watts for LQD40A48-3V3-2V5J models 67.5 Watts for LQD30A48-3V3-1V2J models 72 Watts for LQD30A48-3V3-1V5J models 76.5 Watts for LQD30A48-3V3-1V8J models 87 Watts for LQD30A48-3V3-2V5J models 99.5 Watts for LQD25A48-5V0-3V3J models 3 4 5 Io1 = Imax, Io2 = Imax. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. The part number cannot exceed 18 characters. If the desired part number with options contains 19 characters then the last dash ‘-’ in the part number is removed i.e. LQD25A48-5V0-3V3RAJ becomes LQD25A48-5V03V3RAJ. If the desired part number with options contains 20 characters then all dashes ‘-’ are removed, i.e. LQD25A48-5V03V3RANJ becomes LQD25A485V03V3RANJ. File Name: quarter_brick_dual.pdf Rev (01): 29 Mar 2006 Quarter-Brick Series Dual output DC/DC CONVERTERS High Current, High Efficiency, Low Profile 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product 2.30 [58.4] ø0.040±0.002 (ø1.02 ±0.05) (7 pls) 2.30 (58.4) 0.145 ±0.020 (3.68 ±0.51) 0.250 (6.35) TOP VIEW 0.350 (8.89) 1.45 (36.8) 0.350 (8.89) 1 7 2 6 3 0.250 [6.35] 1 1.45 [36.8] 0.350 [8.89] 7 TOP VIEW 6 2 0.350 [8.89] 5 0.055[1.40] x 0.105[2.67] (7 pls) 2.186 [55.52] 0.057±0.020 [1.45±0.51] 2.000 (50.80) 5 3 4 4 0.125 (3.18) 0.250 (6.35) 0.250 (6.35) 0.725 ±0.020 (18.42 ±0.51) 0.725±0.020 [18.42±0.51] HEIGHT (See Option Table) 0.250 [6.35] HEIGHT 0.285 [7.24] MAX 0.188 (4.78) ø0.054±0.003 2.30 [58.4] ø0.054±0.003 (ø1.37 ±0.08) (7 pls) 2.30 (58.4) 2.000 (50.80) 0.145 ±0.020 (3.68 ±0.51) 0.350 (8.89) 1 7 2 6 [ÿ1.37±0.08] (7 PLS) 2.186 [55.52] 0.057±0.020 [1.45±0.51] 0.067[1.70] x 0.118[3.00] (7 pls) 0.250 [6.35] 1 0.250 (6.35) 0.350 (8.89) Lead coplanarity within 0.006 [0.15] MAX CLEARANCE 0.015 [0.38] CLEARANCE (See Option Table) 1.45 (36.8) 0.125 [3.18] 0.250 [6.35] 1.45 [36.8] 0.350 [8.89] TOP VIEW 6 2 0.350 [8.89] 7 5 3 4 0.250 [6.35] 5 3 0.250 (6.35) 4 0.250 (6.35) 0.725 ±0.020 (18.42 ±0.51) 0.125 (3.18) 0.725±0.020 [18.42±0.51] Dimensions in Inches (mm) Tolerances (unless otherwise specified) x.xx ±0.02 (x.x ±0.5) x.xxx ±0.010 (x.xx ±0.25) 0.125 [3.18] 0.250 [6.35] 0.145±0.020 [3.68±0.51] 2.000 [50.80] Dimensions in Inches (mm) Tolerances (unless otherwise specified) x.xx ±0.02 (x.x ±0.5) x.xxx ±0.010 (x.xx ±0.25) RECOMMENDED PCB LAYOUT Figure 2 - Surface-Mount Mechanical Drawing Figure 1 - Through-Hole Mechanical Drawing PIN CONNECTIONS PIN NUMBER FUNCTION 1 +Vin 2 ON/OFF OPTION STAND OFF HEIGHT BODY HEIGHT 3 -Vin A 0.030 (0.76) min. 0.300 (7.62) max. 4 O/P 1 E 0.070 (1.78) min. 0.340 (8.64) max. 5 O/P RTN 6 Trim 7 O/P 2 DIMENSION OPTIONS Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: 4 Application Note 4 Longform Data Sheet www.artesyn.com File Name: quarter_brick_dual.pdf Rev (01): 29 Mar 2006