Toshiba Matsushita Display Technology Co., Ltd. 31cm COLOUR TFT-LCD MODULE (12.1 TYPE) LTD121KA0S (p-Si TFT) PRODUCT INFORMATION FEATURES (1) (2) (3) (4) 12.1”XGA(1024x768 pixels) display size for Tablet PC Light weight and Thinner design LVDS interface system (H-Sync, V-Sync) Digitizer Easy Insertion & Assembly Solution TENTATIVE MECHANICAL SPECIFICATIONS Item Dimensional Outline (typ.) Number of Pixels Active Area Pixel Pitch Weight (approximately) Backlight Specifications 269.0(W) x 199.0 (H) x 6.5max(D) mm 1024(W) x 768(H) pixels 245.76(W) x 184.32(H) mm 0.24(W) x 0.24(H) 280 g Single CCFL, Sidelight type ABSOLUTE MAXIMUM RATINGS Item Supply Voltage Min. -0.3 0 -0.3 0 -20 10 (VDD) (VFL) FL Driving Frequency (fFL) Input Signal Voltage (VIN) Operating Temperature Storage Temperature Storage Humidity Max. 4.0 2.0 100 VDD+0.3 50 60 90 Unit V kV(rms) kHz V °C °C %(RH) ELECTRICAL SPECIFICATION Item Supply Voltage (VDD) (VFL) FL Start Voltage (Ta=0°C) Differential Input Voltage Com mon Mode Input Voltage Current Consumption (VID) (VCM) *1 (I DD) *2 (I FL) *2 *3 Power Consumption Min. 3.0 --1500 100 1.0 ------- Typ. 3.3 625 ------195 6.0 4.39 Max. 3.6 --1800 600 2.4-(VID)/2 ------- Unit V V(rms) V(rms) mV V mA mA(rms) W Remarks I FL=6.0 mA(rms) I FL=6.0 mA(rms) *1 : 8 color bars pattern *2 : Excepting the efficiency FL inverter OPTICAL SPECIFICATION (Ta=25°C) Item Contrast Ratio (CR) Response Time Luminance (L) (tON) (tOFF) Min. 150 ------- Typ. ------170 Max. --50 50 --- Unit --ms ms cd/m 2 Remarks I FL=6.0mA(rms) *The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Toshiba Matsushita Display technology or others. *The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita Display Technology before proceeding with the design of equipment incorporating this product. (1/11) 2005-7-26 (Ver.1.2) 25.5 +/-0.3(Mount Hole for Digitizer) 4.604 4.5 2.6 3.3 1.4 157.7+/-0.3(Mount Hole for Digitizer) 1 89. 55 170 9.4 5 90( Be zel O penn ing Cen ter) φ2 3 2.5 28.7 5 2.5 3 0.5+/-0.3(Mount Hole for Digitizer) 6.8 9.12 0.5 +/-0.3(Mount Hole for Digitizer) 2 .5 111±1 REAR SIDE 132(Be zel Openning Cent er) (Active 263(Mount Hole for Digitizer) 250.4(Bezel Opening) 245.76 20 1 Area) I/F CN:DF19L-20P-1H(HIROSE) 3 37 .5 ±1 8 4- φ 3 （Mo unt ing Ho le ） 6 Important : Recommendable mating digitizer is Wacom SU-012 Series. Digitizer should be assembled by Set maker side. Digitizer sensor board thickness should be 0.5mm max.. (2/11) 2 64 266 .5 (Bezel Opening) 188.9 Are a) 184 .32 (Active 4-1.4(Mount Position : Front) 5 .5 17 0 154. 7 40±5 （Lead Wire Length） 159.2(Mount Hole for Digitizer) FL CN:BHSR-02VS-1(JST) 3 2 .5 5 2 64 261. 5 6 4-1.7(Mount Position : Rear) 25. 8 266 .5 4.5 2.6 DIMENSIONAL OUTLINE (Front Side) 6 6.5ma x Unit : mm LTD121KA0S Standard tolerance : ±0.5 2005-7-26 (Ver.1.2) 4 .5 2 .16 (3/11) 2.5 6 2.5 5 (Digitizer aessembled by Set maker side) Mount Hole for Digitizer( M2x3) 6 HIGH VOLT AGE R IS K O F E L EC TR I C. D IS CO N NEC T T HE ELE C TR IC P OW E R BE FO RE SER V IC IN G ＣＡＵＴＩ ＯＮ 1 20 NRL75-DKA0S111 ******* **** 当該液 晶ディ スプレー パネルは COLD C ATHODE FLUORE SCEN T LAMP IN LC D PANE L CON蛍光管が 組み込まれ ていますので ， TAINS A SMALL AMOUN T OF MERCU RY,PLE ASE FO LLOW 地方自治 体の条例， また は、 LOCAL ORDINAN CES OR REG ULATIO NS FOR DISPO SAL. 規則に 従って 廃棄して ください 。 5 5 3 8 2.5 Mount Hole for Digitizer(M2x3) (Digitizer aessembled by Set maker side) Mount Hole for Digitizer(M2x3) (Digitizer aessembled by Set maker side) DIMENSIONAL OUTLINE (Rear Side) 6 5 2.5 Unit : mm LTD121KA0S Standard tolerance : ±0.5 2005-7-26 (Ver.1.2) LTD121KA0S BLOCK DIAGRAM D C /D C co nv er t er Y -d ri ve r X -d ri ve r L iq ui d Cr ys ta l Pa ne l Gra y scale Manipu lation Voltag e Generatio n Circui t 1 0 24 x 7 68 p ix el s Pa ne l C on tr ol le r LVDS incl ude CN2 C on ne ct o r CN1 B ac kl ig ht 1024 pixels 1, 1 1, 2 1, Y 2, 1 X2n-1, 1 X2n, 1 X2n-1, Y X2n, Y 1, 768 1024, 1 768 pixels 1024,768 (4/11) 2005-7-26 (Ver.1.2) LTD121KA0S TIMING CHART tv tvw VSYNC tvsu tvhd th HSYNC tvｆ p tvbp tvd tvds DE 1023 1 1024 2 th thw HSYNC thbp thfp thds thd DE 1024 pixel 1 2 3 4 CLK (5/11) 2005-7-26 (Ver.1.2) LTD121KA0S TIMING SPECIFICATION 1) 2) 3) 4) 5) 6) 7) Item Horizontal Scanning Term H-sync Pulse Width Horizontal Front Porch Horizontal Back Porch Horizontal Data Sync Period Horizontal Display Term Frame Period V-sync Pulse Width V-sync Set Up Time (to H-sync) V-sync Hold Time Vertical Front Porch Vertical Back Porch Vertical Data Sync Period Vertical Display Term Clock Period Symbol th thw thfp thbp thds thd tv tvw tvsu tvhd tvfp tvbp tvds tvd tc min. 1334 x tc 4 x tc 4 x tc 24 x tc 32 x tc 1024 x tc 778 x th 2 x th 8 x tc (thbp+16) x tc 1 x th 2 x th 8 x th 768 x th 15.0 typ. 1344 x tc 136 x tc 24 x tc 160 x tc 296 x tc 1024 x tc 806 x th 6 x th 3 x th 29 x th 35 x th 768 x th 15.38 max. 1024 x tc 860 x th 768 x th - unit clock clock clock clock clock clock line line clock clock line line line line ns Note 1) Refer to “Timing Chart” and LVDS (THC63LVDF84A-85) specifications by THine Electronics, Inc. corporation. Note 2) If DE is fixed to "H" or "L" level for certain period while NCLK is supplied, the panel displays black with some flicker. Note 3) If NCLK is fixed to "H" or "L" level for certain period while DE is supplied, the panel may be damaged. Note 4) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality. There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving condition (especially driving frequency), even if the condition satisfies above timing specifications and recommended operating conditions shown in 3. Note5 ) Do not make tv, tvhd and tvds fluctuate. If tv, tvhd, and tvds are fluctuate, the panel displays black. Note6) In case of using the long frame period, the deterioration of display quality, noise etc. may be occurred. Note7) NCLK count of each Horizontal Scanning Time should be always the same. V-Blanking period should be “n” X “Horizontal Scanning Time”. (n: integer) Frame period should be always the same. (6/11) 2005-7-26 (Ver.1.2) LTD121KA0S CONNECTOR PIN ASSIGNMENT FOR INTERFACE CN1 INPUT SIGNAL Connector : DF19L-20P-1H / HIROSE Mating Connector : DF19G-20S-1F (FPC), DF19G-20S-1C (Cable) Terminal No. Symbol Function 1 VDD Power Supply : +3.3V 2 VDD Power Supply : +3.3V 3 VSS GND 4 VSS GND 5 RxIN0Negative LVDS differential data input (R0-R5,G0) 6 RxIN0+ Positive LVDS differential data input (R0-R5,G0) 7 VSS GND 8 RxIN1Negative LVDS differential data input (G1-G5, B0-B1) 9 RxIN1+ Positive LVDS differential data input (G1-G5, B0-B1) 10 VSS GND 11 RxIN2Negative LVDS differential data input (B2-B5, HS, VS, DE) 12 RxIN2+ Positive LVDS differential data input (B2-B5, HS, VS, DE) 13 VSS GND 14 CLKClock Signal(-) 15 CLK+ Clock Signal(+) 16 VSS GND 17 NC 18 NC 19 VSS GND 20 VSS GND Note 1) Please connect GND pin to ground. Don't use it as no-connect nor connection with high impedance. CN2 CCFL POWER SOURCE Connector : BHSR-02VS-1 / JAPAN SOLDERLESS TERMINAL MFG CO., LTD. Mating Connector : SM02B-BHS-1 / JAPAN SOLDERLESS TERMINAL MFG CO., LTD. Terminal No. Symbol Function 1 VFLH CCFL Power Supply ( high voltage) 2 VFLL CCFL Power Supply (low voltage) (7/11) 2005-7-26 (Ver.1.2) LTD121KA0S RECOMMENDED TRANSMITTER (THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85) TO LTD121KA0S INTERFACE ASSIGNMENT Case1: 6bit Transmitter THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85 Input Terminal No. Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN5 TIN6 TIN7 TIN8 TIN9 TIN10 TIN11 TIN12 TIN13 TIN14 TIN15 TIN16 TIN17 TIN18 TIN19 TIN20 Terminal 44 45 47 48 1 3 4 6 7 9 10 12 13 15 16 18 19 20 22 23 25 CLK IN 26 Input Signal (Graphics controller output signal) Symbol Function R0 Red Pixels Display Data (LSB) R1 Red Pixels Display Data R2 Red Pixels Display Data R3 Red Pixels Display Data R4 Red Pixels Display Data R5 Red Pixels Display Data (MSB) G0 Green Pixels Display Data (LSB) G1 Green Pixels Display Data G2 Green Pixels Display Data G3 Green Pixels Display Data G4 Green Pixels Display Data G5 Green Pixels Display Data (MSB) B0 Blue Pixels Display Data (LSB) B1 Blue Pixels Display Data B2 Blue Pixels Display Data B3 Blue Pixels Display Data B4 Blue Pixels Display Data B5 Blue Pixels Display Data (MSB) HSYNC H-Sync VSYNC V-Sync DE Compound Synchronization Signal CLK Output Signal Symbol Data Sampling Clock LTD121KA0S Interface (CN1) Terminal Symbol TOUT0TOUT0+ No.5 No.6 IN0IN0+ TOUT1TOUT1+ No.8 No.9 IN1IN1+ TOUT2TOUT2+ No.11 No.12 IN2IN2+ TCLK OUTTCLK OUT+ No.14 No.15 CLKCLK+ Note 1) Please connect NC pin to nothing. Don't connect it to ground nor to other signal input. IN 0 IN 1 T IN 6 T IN5 T IN 4 T IN3 T IN2 T IN 1 T IN 0 G0 R5 R4 R3 R2 R1 R0 T IN12 T IN 11 T IN10 T IN9 T IN 8 T IN 7 B0 G5 G4 G3 G2 T IN19 T IN 18 T IN17 T IN 16 T IN15 T IN 14 B3 B2 T IN 13 B1 IN 2 T IN 20 DE VSYNC HS YNC B5 (8/11) B4 G1 2005-7-26 (Ver.1.2) LTD121KA0S RECOMMENDED TRANSMITTER (THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85) TO LTD121KA0S INTERFACE ASSIGNMENT Case2: 8bit Transmitter THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85 Input Signal (Graphics controller output signal) Symbol Function R0 Red Pixels Display Data (LSB) R1 Red Pixels Display Data R2 Red Pixels Display Data R3 Red Pixels Display Data R4 Red Pixels Display Data R5 Red Pixels Display Data (MSB) G0 Green Pixels Display Data(LSB) G1 Green Pixels Display Data G2 Green Pixels Display Data G3 Green Pixels Display Data G4 Green Pixels Display Data G5 Green Pixels Display Data(MSB) B0 Blue Pixels Display Data (LSB) B1 Blue Pixels Display Data B2 Blue Pixels Display Data B3 Blue Pixels Display Data B4 Blue Pixels Display Data B5 Blue Pixels Display Data (MSB) HSYNC H-Sync VSYNC V-Sync DE Compound Synchronization Signal NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) Input Terminal No. Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN6 TIN7 TIN8 TIN9 TIN12 TIN13 TIN14 TIN15 TIN18 TIN19 TIN20 TIN21 TIN22 TIN24 TIN25 TIN26 TIN27 TIN5 TIN10 TIN11 TIN16 TIN17 TIN23 Terminal 51 52 54 55 56 3 4 6 7 11 12 14 15 19 20 22 23 24 27 28 30 50 2 8 10 16 18 25 CLK IN 31 CLK Output Signal Symbol LTD121KA0S Interface (CN1) Terminal Symbol TOUT0TOUT0+ No.5 No.6 IN0IN0+ TOUT1TOUT1+ No.8 No.9 IN1IN1+ TOUT2TOUT2+ No.11 No.12 IN2IN2+ No.14 No.15 CLKCLK+ TOUT3TOUT3+ TCLK OUTTCLK OUT+ Data Sampling Clock Note 1) Please connect NC pin to nothing. Don't connect it to ground nor to other signal input. IN 0 T IN 7 T IN 6 T IN 4 T IN 3 T IN 2 T IN 1 T IN 0 R5 R4 R3 R2 R1 R0 T IN 1 8 T IN 1 5 T IN 1 4 T IN 13 T IN 1 2 T IN 9 T IN 8 B1 B0 G5 G4 G3 G2 G1 T IN 2 6 T IN 2 5 T IN 2 4 T IN 22 T IN 2 1 T IN 2 0 T IN 1 9 B4 B3 B2 G0 IN 1 IN 2 DE IN 3 T IN 2 3 NC VS YNC HS YNC B5 T IN 1 7 T IN 1 6 T IN 11 NC NC NC (9/11) T IN 1 0 NC T IN 5 NC T IN 2 7 NC 2005-7-26 (Ver.1.2) LTD121KA0S 256k (k=1024) COLORS COMBINATION TABLE Display Basic Color Gray Scale of Red Black Blue Green Light Blue Red Purple Yellow White Black Dark ↑ ↓ Light Red Black Gray Scale of Green Dark ↑ ↓ Light Green Black Gray Scale of Blue Dark ↑ ↓ Light Blue Black Gray Scale of White & Black Dark ↑ ↓ Light White R5 R4 R3 R2 R1 R0 L L L L H H H H L L L L L L L H H H H L L L L L L L H H H H L L L L L L L H H H H L L L L L L L H H H H L L H L L L L H H H H L H L G5 G4 G3 G2 G1 G0 L L H H L L H H L L L L L H H L L H H L L L L L H H L L H H L L L : : H H H L L L H H H L L L H H H L L L L L L L L L H H H L L L L L L L L L L H H L L L H L H L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L H H H L L L H H H L L L H H H H H H L H L H L H L H L L L L H L H L H L H L L L L H L H L H L H L L L L L L L L H L L L L H L L L L L L L L L L L L L L L L L L L L L L L L H L L L L H L L L L L L L L L L L L L H H H L L L L L L L L L L H H L L L H L H L L L L L L L L L L L L L L L L L L L L L L H H H L H H H H H H H H H H L H L H L H L H L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L H L L L L H L H H H L L L L H H L L H H L H L H L H H H L H H H L H : : L L L L L L L L L L L H L L L L H L H H H L L L H H H L L L H H H L L L : : H H H L H L H L H L H L L L : : : : L L L L L L L H L H L H L H L L L Gray Scale Level L 0 L 1 L 2 L3… : : L L L L L L H H H L L L : : H H H L L H H L L H H L L L : : : : L L L L L L L L H H L L H H L L L : : : : L L L L L L L L H H L L H H L L L B5 B4 B3 B2 B1 B0 : : H H H (10/11) L H H H L H H H H H H H H H H L60 L61 L62 Red L63 L 0 L 1 L 2 L3… L60 L61 L62 Green L63 L 0 L 1 L 2 L3… L60 L61 L62 Blue L63 L 0 L 1 L 2 L3… L60 L61 L62 White L63 2005-7-26 (Ver.1.2) LTD121KA0S ! FOR SAFETY LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions. In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed in Engineering Information No.EE- N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA MATSUSHITA DISPLAY TECHNOLOGY LCD MODULES". Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical information. 1) SPECIAL PURPOSES A) Toshiba Matsushita Display technology's Standard LCD Modules have not been customized for operation in extreme environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic. B) Since Toshiba Matsushita Display technology's Standard LCD Modules have not been designed for operation in extreme environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which exceed Toshiba Matsushita Display technology's published specification limits. C) In addition, since Toshiba Matsushita Display technology Standard LCD Modules have not been designed for use in applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft navigation control systems (such as, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical device or patient life-support systems. 2) DISASSEMBLING OR MODIFICATION DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. Toshiba Matsushita Display technology doses not warrant the module, if customer disassembled or modified it. 3) BREAKAGE OF LCD PANEL DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if LCD panel is broken and liquid crystal material spills out. If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately. If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 4) GLASS OF LCD PANEL BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken. 5) ELECTRIC SHOCK DISCONNECT POWER SUPPLY before handling LCD module. DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on. 6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may be damaged. Employ protection circuit for power supply, whenever the specification or TD specifies it. Suitable protection circuit should be applied for each system design. 7) RECOMMENDED OPERATION CONDITIONS The performance and quality of the LCD panel are warranted only when the LCD panel is used within “the recommended operation conditions”. Toshiba Matsushita Display Technology Co., Ltd. never warrants the performance and quality of the LCD panel when you use the LCD panel over “the recommended operation conditions ”, although within “the absolute maximum rating”. To use the LCD panel over “the recommended operation conditions” may have bad influence on the characteristics and reliability of the LCD panel and may shorten the life of the LCD panel. Therefore, when designing the whole set, not to be over “the recommended operation conditions”, you should fully take care of supply voltage change, characteristic of connection parts, serge of input-and-output line, and surrounding temperature. 8) DISPOSAL When dispose LCD module, obey to the applicable environmental regulations. (11/11) 2005-7-26 (Ver.1.2)