LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only TRIPLE DIGIT LED DISPLAY (0.39 Inch) LTD435/66-XX/KP38 DATA SHEET DOC. NO : QW0905- LTD435/66-XX/KP38 REV. : B DATE : 28 - Oct. - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LTD435/66-XX/KP38 Page 1/7 Package Dimensions 30.02 (1.182") 7.0 (0.276") L3 L1 10.0 (0.39") DIG.1 DIG.2 L2 DIG.3 12.8 (0.504") 10.16 (0.4") 0.3TYP LTD435/66-XX/KP38 LIGITEK A F G E B C D DP 3.8±0.5 0.5 TYP 2.54X7=17.78 (0.7") PIN NO.1 Note : 1.All dimension are in millimeters and (lnch) tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/7 PART NO. LTD435/66-XX/KP38 Internal Circuit Diagram LTD4356-XX/KP38 12 11 3 4 2 15 8 6 A B C D E F G LTD4366-XX/KP38 DIG.1 1 DP 12 11 3 4 2 15 8 6 A B C D E F G L1 L2 L2 A B C D E F G 14 DIG.2 5 L3 A B C D E F G DP DP A B C D E F G A B C D E F G DP DIG.3 7 1 DP L1 L3 DIG.1 DP 14 DIG.2 5 DIG.3 7 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/7 PART NO. LTD435/66-XX/KP38 Electrical Connection PIN NO.1 LTD4356-XX/KP38 LTD4366-XX/KP38 PIN NO.1 1 Common Cathode Dig.1 1 Common Anode Dig.1 2 Anode E 2 Cathode E 3 Anode C,L3 3 Cathode C,L3 4 Anode D 4 Cathode D 5 Common Cathode Dig.2 5 Common Anode Dig.2 6 Anode DP 6 Cathode DP 7 Common Cathode Dig.3 7 Common Anode Dig.3 8 Anode G 8 Cathode G 9 NO Pin 9 NO Pin 10 NO Pin 10 NO Pin 11 Anode B,L2 11 Cathode B,L2 12 Anode A,L1 12 Cathode A,L1 13 NO Pin 13 NO Pin 14 Common Cathode L1,L2,L3 14 Common Anode L1,L2,L3 15 Anode F 15 Cathode F LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LTD435/66-XX/KP38 Page 4/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT HR Forward Current Per Chip IF 30 mA Peak Forward Current Per Chip (Duty 1/10,0.1ms Pulse Width) IFP 100 mA Power Dissipation Per Chip PD 100 mW Ir 10 μA Operating Temperature Topr -25 ~ +85 ℃ Storage Temperature Tstg -25 ~ +85 ℃ Reverse Current Per Any Chip Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260 ℃ Part Selection And Application Information(Ratings at 25℃) common cathode Material Emitted or anode CHIP PART NO Electrical λP (nm) △λ Vf(v) (nm) Iv(mcd) Min. Typ. Max. Min. Typ. IV-M LTD4356-XX/KP38 GaAlAs Red Common Cathode 660 20 1.5 1.8 2.4 6.1 10.5 2:1 LTD4366-XX/KP38 GaAlAs Red Common Anode 660 20 1.5 1.8 2.4 6.1 10.5 2:1 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ± 15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LTD435/66-XX/KP38 Page 5/7 Test Condition For Each Parameter Symbol Unit Test Condition Forward Voltage Per Chip Vf volt If=20mA Luminous Intensity Per Chip Iv mcd If=10mA Peak Wavelength λp nm If=20mA △λ nm If=20mA Ir μA Vr=5V Parameter Spectral Line Half-Width Reverse Current Any Chip Luminous Intensity Matching Ratio IV-M LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page6/7 PART NO. LTD435/66-XX/KP38 Typical Electro-Optical Characteristics Curve HR CHIP Fig.1 Forward current vs. Forward Voltage 3.0 Relative Intensity@20mA 1000 Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current 100 10 1.0 0.1 1.0 2.0 3.0 4.0 2.5 2.0 1.5 1.0 0.5 0 5.0 1.0 10 Fig.4 Relative Intensity vs. Temperature 1.2 Relative Intensity@20mA Forward Voltage@20mA Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 -0 20 40 60 80 100 Relative Intensity@20mA Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0 650 700 Wavelength (nm) 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 -0 20 40 60 80 Ambient Temperature( ℃) Ambient Temperature( ℃) 600 1000 Forward Current(mA) Forward Voltage(V) -40 100 750 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LTD435/66-XX/KP38 Page 7/7 Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=10mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hous. Thermal Shock Test 1.Ta=105 ℃±5 ℃&-40 ℃±5 ℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11