Part Number: www.SunLED.com LUG12D T-1 3/4 (5mm) SOLID STATE LAMP Features z LOW POWER CONSUMPTION. z POPULAR T-1 3/4 DIAMETER PACKAGE. z GENERAL PURPOSE LEADS. z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UG (GaP) Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PT 62.5 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 140 mA mW °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number LUG12D Emitting Color Green Published Date : MAR 22, 2008 Emitting Material GaP Operating Characteristics (TA=25°C) Drawing No : SDSA1258 Unit Forward Voltage (Typ.) (IF=10mA) VF 2.0 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=10mA) λP 565 nm Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Luminous Intensity (IF=10mA) mcd Lens-color Green Diffused UG (GaP) min. typ. 5 19 V5 Wavelength nm λP Viewing Angle 2 θ 1/2 565 30° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com LUG12D T-1 3/4 (5mm) SOLID STATE LAMP UG Published Date : MAR 22, 2008 Drawing No : SDSA1258 V5 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com LUG12D T-1 3/4 (5mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 22, 2008 Drawing No : SDSA1258 V5 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com T-1 3/4 (5mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 22, 2008 LUG12D Drawing No : SDSA1258 LUG12D V5 Checked : B.L.LIU P.4/4