Part Number: ZMD46W-3 SUBMINIATURE SOLID STATE LAMP www.SunLED.com PRELIMINARY SPEC Features z SUBMINIATURE z GULL WING LEAD. z LONG z LOW LIFE - SOLID STATE RELIABILITY. PACKAGE PROFILE. z PACKAGE : 1000PCS / REEL. z MOISTURE z PACKAGE. SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MD (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZMD46W-3 Emitting Color Red Published Date : FEB 25,2008 Emitting Material InGaAlP Operating Characteristics (TA=25°C) °C Unit Forward Voltage (Typ.) (IF=20mA) VF 1.9 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 640 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 628 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 27 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF Luminous Intensity (IF=20mA) mcd Lens-color min. typ. 650 1590 Water Clear Drawing No : SDSA3661 MD (InGaAlP) V5 Wavelength nm λP Viewing Angle 2 θ 1/2 640 20° Checked : B.L.LIU P.1/4 Part Number: ZMD46W-3 SUBMINIATURE SOLID STATE LAMP www.SunLED.com MD Published Date : FEB 25,2008 Drawing No : SDSA3661 V5 Checked : B.L.LIU P.2/4 Part Number: ZMD46W-3 SUBMINIATURE SOLID STATE LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25,2008 Drawing No : SDSA3661 V5 Checked : B.L.LIU P.3/4 Part Number: SUBMINIATURE SOLID STATE LAMP www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : FEB 25,2008 ZMD46W-3 Drawing No : SDSA3661 ZMD46W-3 V5 Checked : B.L.LIU P.4/4