Ordering number : ENA0693 Bi-CMOS LSI For CCD LV5609V Vertical Clock Driver Overview The LV5609V is vertical clock driver for CCD. Functions • Ternary output ×2ch • Binary output ×2ch • SHT output ×1ch • Output ON resistance : 30Ω typ Specifications Absolute Maximum Ratings at Ta = 25°C, VSS = VM = 0V Parameter Symbol Maximum supply voltage Allowable power dissipation Conditions Ratings Unit VDD max 6 V VH max 20 V VL max -10 V VH-VL max 24 V 0.67 W Pd max with specified substrate * Operating temperature Topr -20 to +80 °C Storage temperature Tstg -40 to +125 °C * : Specified substrate : 114.3×76.1×1.6mm3, glass epoxy board Allowable Operating Ratings at Ta = 25°C, VSS = VM = 0V Parameter Symbol Ratings Conditions min Supply voltage VDD typ 2.0 VH VL -8.5 VH-VL Unit max 3.3 5.5 15 17 V V -7.5 -4 V 23.5 V CMOS input High voltage VINH 0.8VDD VDD V CMOS input Low voltage VINL -0.1 0.4 V Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before using any SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. 32207 MS PC 20061109-S00003 No.A0693-1/8 LV5609V Electrical Characteristics at Ta = 25°C, VDD = 3.3V, VSS = 0V, VH = 15V, VL = -7.5V, VM = 0V, Unless otherwise specified Parameter Symbol Ratings Conditions min Static current drain Unit max 1 μA IH VH pin 10 μA IL VL pin 1 μA VDD pin See *1 and *2. 1 mA IDD Dynamic current drain typ IDD VDD pin IH VH pin See *1 and *2. 2.4 4.5 mA IL VL pin See *1 and *2. 3 5 mA RL IO = +10mA 20 30 Ω RM IO = ±10mA 30 45 Ω RH IO = -10mA 30 40 Ω RSHT IO = -10mA 30 40 Ω TPLM No load 200 ns TPMH No load 200 ns Output ON resistance Propagation delay time TPLH No load 200 ns TPML No load 200 ns TPHM No load 200 ns TPHL No load 200 ns TTLM VL → VM V1, V3 See *1. 800 ns VL → VM V2, V4 See *1. 800 ns TTMH VM → VL V1, V3 See *1. 800 ns TTLH VL → VH SHT See *1. 200 ns TTML VM → VL V1, V3 See *1. 800 ns VM → VL V2, V4 See *1. 800 ns TTHM VH → VM V1, V3 See *1. 800 ns TTHL VH → VL SHT See *1. 200 ns Rise time Fall time *1 : Refer to the CCD equivalent load shown below. *2 : Refer to the timing waveform on Page 7. 2000pF 2000pF 1000pF V4 (Ternary) V1 (Ternary) 3000pF SHT 3000pF 1600pF 1000pF V3 (Binary) V2 (Binary) 2000pF 2000pF No.A0693-2/8 LV5609V Package Dimensions unit : mm (typ) 3179C Pd max – Ta 6.5 0.5 6.4 11 4.4 20 1 10 0.65 0.15 0.22 1.5max (1.3) (0.33) Allowable power dissipation, Pd max – W 1.0 Specified circuit board : 114.3×76.1×1.6mm3 glass epoxy board 0.8 0.67 0.6 0.4 0.30 0.2 0 – 20 0 20 40 60 80 100 0.1 Ambient temperature, Ta – °C SANYO : SSOP20(225mil) No.A0693-3/8 LV5609V Pin Assignment SSOP20 V3 1 20 V4 V2 2 19 SHT V1 3 18 NC VM 4 17 VL NC 5 16 VSS VH 6 15 VDD XV1 7 14 XSHT XSG1 8 13 NC XV2 9 12 XV4 LV5609V XV3 10 11 XSG3 Top view Pin Function Pin No. Name 1 V3 Level shift output (ternary VH, VM, VL) Mode 2 V2 Level shift output (binary VM, VL) 3 V1 Level shift output (ternary VH, VM, VL) 4 VM GND for output 5 NC 6 VH Hi power supply (15V system) for output 7 XV1 V1 transfer pulse input 8 XSG1 9 XV2 10 XV3 11 XSG3 V1 read pulse input V2 transfer pulse input V3 transfer pulse input V3 read pulse input 12 XV4 13 NC1 V4 transfer pulse input 14 XSHT 15 VDD Power supply (3.3V system) for input buffer 16 VSS GND for input buffer 17 VL SHT pulse input LO power supply (-7.5V system) for output 18 NC 19 SHT Level shift output (binary VH, VL) 20 V4 Level shift output (ternary VM, VL) No.A0693-4/8 LV5609V Block Diagram VDD Level Shift & Output Buffer 20 Input Buffer 0.1μF 9 VH 1μF XV1 12 30 6 V1 30 5 V2 XSG1 13 XV2 14 7 VM XV3 15 30 4 V3 XV4 17 30 3 V4 XSHT 18 30 2 SHT XSG3 16 VSS 21 1 VL 1μF Logical Function Table Input Output XV1 XSG1 XV2 XV3 XSG3 XV4 L L X V1 V2 V3 V4 X VH X XSHT SHT X L H X X VM X X H L X X VL X X H H X X VL X X X X L X X VM X X X H X X VL X X X X L X X VH X X X H X X VL No.A0693-5/8 LV5609V Timing Chart VDD 50% XV1 to XV4 XSG1 XSG3 50% VSS VDD TTHM VSS TPMH TTMH VH V1 V3 TPHM 50% TTLM TTML 90% TPLM TPML VM 90% 10% 10% VL TTLM TPLM V2 V4 TTML TPML VM 90% 10% VL VDD XSHT 50% 50% VSS TTLH TTHL TPLH VH SHT VL TPHL 90% 10% No.A0693-6/8 LV5609V CCD Equivalent Load Measurement Timing Waveform 63.5μs 127μs 2μs XV1 XV2 XV3 XV4 XSG1 2.5μs XSG3 63.5μs 2.5μs 2μs 16.7ms XSHT Enlarged View of overlapped portion XV1 XV2 XV3 XV4 0μs 0.7μs 1.4μs 2.1μs 2.8μs 3.5μs 4.2μs 4.9μs No.A0693-7/8 LV5609V Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2007. Specifications and information herein are subject to change without notice. PS No.A0693-8/8