MIL-DTL-26482 Connectors 240-264J MIL-DTL-26482 Series II Type Filter Connector Jam Nut Receptacle Contact Gender P - Pin S - Socket MIL-C-26482 Series II Filter Connector Product Code B Filter Type P - Pi Circuit C - C Circuit Insert Arrangement Per MIL-STD-1669 240 - 264 J Shell Style J - Jam Nut P Capacitance (See Table II) 16-26 P S P Flange Mounting Style N - Not Applicable A Termination S - Solder Cup Connector Class (See Table I) N N Alternate Key Position W, X, Y, Z, N = Normal L Max. REF J - Jam Nut Master Polarizing Keyway F .060 (1.5) Width Polarizing Stripe G B Interfacial Seal R O-Ring C A J Painted Bayonet Pin Ends A PI - CIRCUIT (pF) C - CIRCUIT (pF) Thread D S .027 (.7) .011 (.3) N Thread TABLE II: CAPACITOR ARRAY CODE CAPACITANCE RANGE CLASS P (Size 20 Contacts) V (Size 16 & 12 Contacts) Peripheral Gasket TABLE I: CONNECTOR CLASS SYM CLASS MATERIAL FINISH DESCRIPTION X* 160,000 - 240,000 80,000 - 120,000 M Environmental Aluminum Electroless Nickel Y* 80,000 - 120,000 40,000 - 60,000 Z* 60,000 - 90,000 30,000 - 45,000 MT Environmental Aluminum Ni-PTFE 1000 Hour GreyTM Nickel Fluorocarbon Polymer A 38,000 - 56,000 19,000 - 28,000 NF Environmental Aluminum B 32,000 - 45,000 16,000 - 22,500 Cadmium O.D. Over Electroless Nickel C 18,000 - 33,000 9,000 - 16,500 P Environmental Electro-Deposited Nickel D 8,000 - 12,000 4,000 - 6,000 Stainless Steel E 3,300 - 5,000 1,650 - 2,500 ZN Environmental Aluminum Zinc-Nickel Over Electroless Nickel F 800 - 1,300 400 - 650 G 400 - 600 200 - 300 H2 Hermetic Stainless Steel Electroless Nickel * Reduced DWV – Please consult factory. © 2008 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-48 E-Mail: [email protected] MIL-DTL-26482 Connectors 240-264J MIL-DTL-26482 Series II Type Filter Connector Jam Nut Receptacle TABLE III: DIMENSIONS A +.000 (0) -.031 (.8) LENGTH B +.000 (0) -.031 (.8) ACROSS FLANGE CORNER C +.000 (0) -.010 (.3) MTG. FLAT 8 .954 (24.2) 1.078 (27.4) 10 1.078 (27.4) 12 D THREAD (CLASS 2) E PANEL FLAT LOCATION F MOUNTING FLANGE LOCATION G MOUNTING FLANGE THINCKNESS .530 (13.5) .500-20 UNF .536(13.6) .707 (18.0) .691 (17.6) .113 (2.9) .097 (2.5) 1.203 (30.6) .655 (16.6) .625-24 UNEF .661 (16.8) .707 (18.0) .691 (17.6) .113 (2.9) .097 (2.5) 1.266 (32.2) 1.391 (35.3) .818 (20.8) .750-20 UNEF .824 (20.9) .707 (18.0) .691 (17.6) .113 (2.9) .097 (2.5) 14 1.391 (35.3) 1.516 (38.5) .942 (23.9) .875-20 UNEF .948 (24.1) .707 (18.0) .691 (17.6) .113 (2.9) .097 (2.5) 16 1.516 (38.5) 1.641 (41.7) 1.062 (27.0) 1.000-20 UNEF 1.072 (27.2) .707 (18.0) .691 (17.6) .113 (2.9) .097 (2.5) 18 1.641 (41.7) 1.766 (44.9) 1.191 (30.3) 1.0625-18 UNEF 1.197 (30.4) .707 (18.0) .691 (17.6) .113 (2.9) .097 (2.5) 20 1.828 (46.4) 1.954 (49.6) 1.316 (33.4) 1.1875-18 UNEF 1.322 (33.6) .772 (19.6) .754 (19.2) .148 (3.8) .128 (3.3) 22 1.954 (49.6) 2.078 (52.8) 1.441 (36.6) 1.3125-18 UNEF 1.447 (36.8) .772 (19.6) .754 (19.2) .148 (3.8) .128 (3.3) 24 2.078 (52.8) 2.203 (56.0) 1.566 (39.8) 1.4375-18 UNEF 1.572 (39.9) .803 (20.4) .785 (20.0) .148 (3.8) .128 (3.3) SHELL SIZE E K Panel Cut-Out TABLE III: DIMENSIONS (CONTINUED) J +/- .010 (.3) SHELL SIZE TO THREAD CHAMFER K +.010 (.3) -.005 (.1) PANEL MOUNTING HOLE L OVERALL LENGTH N UNEF-2A MOUNTING THREAD P S PANEL THICKNESS V MAX WEIGHT (Lbs.) MIN. MAX. .062 (1.6) .187 (4.8) .204 (5.2) .144 (3.7) .0430 (1.1) 8 .368 (9.3) .572 (14.5) 1.38 (35.1) .5625-24 .134 (3.4) .074 (1.9) 10 .368 (9.3) .697 (17.7) 1.38 (35.1) .6875-24 .134 (3.4) .074 (1.9) .062 (1.6) .187 (4.8) .204 (5.2) .144 (3.7) .0610 (1.5) 12 .368 (9.3) .885 (22.5) 1.38 (35.1) .875-20 .134 (3.4) .074 (1.9) .062 (1.6) .187 (4.8) .204 (5.2) .144 (3.7) .0880 (2.2) 14 .368 (9.3) 1.010 (25.7) 1.38 (35.1) 1.000-20 .134 (3.4) .074 (1.9) .062 (1.6) .187 (4.8) .204 (5.2) .144 (3.7) .1100 (2.8) 16 .368 (9.3) 1.135 (28.8) 1.38 (35.1) 1.125-18 .134 (3.4) .074 (1.9) .062 (1.6) .187 (4.8) .204 (5.2) .144 (3.7) .1310 (3.3) 18 .368 (9.3) 1.260 (32.0) 1.38 (35.1) 1.250-18 .134 (3.4) .074 (1.9) .062 (1.6) .187 (4.8) .204 (5.2) .144 (3.7) .1720 (4.4) 20 .368 (9.3) 1.385 (35.2) 1.44 (36.6) 1.375-18 .099 (2.5) .039 (1.0) .062 (1.6) .250 (6.4) .169 (4.3) .109 (2.8) .2110 (5.4) 22 .368 (9.3) 1.510 (38.4) 1.44 (36.6) 1.500-18 .099 (2.5) .039 (1.0) .062 (1.6) .250 (6.4) .169 (4.3) .109 (2.8) .2420 (6.1) 24 .395 (10.0) 1.635 (41.5) 1.44 (36.6) 1.625-18 .099 (2.5) .039 (1.0) .062 (1.6) .250 (6.4) .169 (4.3) .109 (2.8) .2930 (7.4) © 2008 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-49 E-Mail: [email protected] B