EMI/RFI Environmental Backshells AS85049/18 EMI/RFI Environmental Backshell M85049/18 11 N 03 A Glenair Connector Designator H MIL-DTL-38999 Series III & IV, EN3645 Shell Size Clamp Size (Table II & III) Finish N = Electroless Nickel W = 1,000 Hr. Cadmium Olive Drab Over Electroless Nickel TABLE I Shell Size 9 11 13 15 17 19 21 23 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H Length Code (Table IV, Omit for Standard) Basic Part No. B Dia Max .75 (19.1) .85 (21.6) 1.00 (25.4) 1.15 (29.2) 1.25 (31.8) 1.40 (35.6) 1.55 (39.4) 1.65 (41.9) 1.85 (47.0) Length A Thread O-Ring B Dia Cable E Range TABLE II Shell Size 9 11 13 15 17 19 21 23 25 Clamp Size (Table III) Min Max 01 02 01 03 02 04 02 05 02 06 03 07 03 08 03 09 04 10 F TABLE III Clamp Size 01 02 03 04 05 06 07 08 09 10 Cable Range Min Max .062 (1.6) .125 (3.2) .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) .500 (12.7) .625 (15.9) .625 (15.9) .750 (19.1) .750 (19.1) .875 (22.2) .875 (22.2) 1.000 (25.4) 1.000 (25.4) 1.125 (28.6) 1.125 (28.6) 1.250 (31.8) E Max .781 (19.8) .969 (24.6) 1.062 (27.0) 1.156 (29.4) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) F Max 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.625 (41.3) 1.625 (41.3) TABLE IV 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Length Code Std. A B C Available Shell Sizes 9 - 25 9 - 25 15 - 25 21 - 25 Length 1.500 (38.1) 2.500 (63.5) 3.500 (88.9) 4.500 (114.3) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 39-17