MAPDCT0030 2 Way 0º Power Divider 5 to 1000 MHz Rev. V5 Schematic Features • • • • • Surface mount 2 Way 0 degree. 260°C reflow compatible RoHS* compliant Available on tape and reel. Description M/A-Com Technology Solutions MAPDCT0030 is a 2 way 0 degree RF power divider in a low cost, surface mount package. Ideally suited for high volume CATV & VSAT applications. Two 0603 1pF capacitors and one 200Ω resistor are required with this part. Case style: 0.141 (3.60±0.4) 0.181(4.60) Pin configuration Pin no. Function 1 Output 1 2 External 1pF Capacitor to ground 3 Ground 4 Input 5 External 1pF Capacitor to ground 6 Output 2 Unless otherwise stated dimensions are in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Note: Pin’s 2 and 5 need to be connected together on the PCB as shown above. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0030 2 Way 0º Power Divider 5 to 1000 MHz Rev. V5 Electrical specifications: TA = 25°C, Z0 = 75Ω, Pin = 0dBm Parameter Frequency Units Min Typ Max Insertion Loss (Above 3dB) 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz dB dB dB - 0.3 0.5 1.1 0.5 1.1 2.2 Amplitude Unbalance 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz dB dB dB - 0.2 0.2 0.4 ± 0.5 ± 0.3 ± 0.9 Phase Unbalance 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz º º º - 0.5 1.0 1.5 ±4 ±4 ±6 Return Loss: Input 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz dB dB dB 23 16 17 35 22 24 - Isolation (between outputs) 5 - 400 MHz 400 - 820 MHz 820 - 1000 MHz dB dB dB 18 20 14 35 32 20 - Recommended Maximum Ratings Parameter Value Input power 1W Internal Load Dissipation 0.125W Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C Application Circuit 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0030 2 Way 0º Power Divider 5 to 1000 MHz Rev. V5 Typical performance curves: TA = 25°C, Z0 = 75Ω, Pin = 0dBm Insertion loss 2: pin 4 to pin 6 0.0 - 0.2 - 0.4 - 0.6 - 0.8 - 1.0 - 1.2 - 1.4 - 1.6 - 1.8 - 2.0 dB dB Insertion loss 1: pin 4 to pin 1 5 204 403 602 801 0.0 - 0.2 - 0.4 - 0.6 - 0.8 - 1.0 - 1.2 - 1.4 - 1.6 - 1.8 - 2.0 5 1000 204 1.0 0.8 0.6 Degrees dB 0.4 0.2 0.0 - 0.2 - 0.4 - 0.6 - 0.8 - 1.0 403 801 1000 Phase balance Amplitude balance 204 602 Frequency (MHz) Frequency (MHz) 5 403 602 801 1000 5 4 3 2 1 0 -1 -2 -3 -4 -5 5 204 Frequency (MHz) 403 602 801 1000 801 1000 Frequency (MHz) Return loss: Input Isolation 0 0 -10 -10 -20 dB dB -20 -30 -40 -30 -40 -50 5 204 403 602 Frequency (MHz) 801 1000 -50 5 204 403 602 Fre que nc y (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0030 2 Way 0º Power Divider 5 to 1000 MHz Rev. V5 Tape & Reel Information DIRECTION OF FEED W Bo Ko Ao P1 Pin 1 Item Dimension Ao 5.60mm +/- 0.1mm Bo 4.90mm +/- 0.1mm Ko 3.90mm +/- 0.1mm W 12.00mm +/- 0.3mm P1 8.00mm +/- 0.1mm Ordering information Part number Description MAPDCT0030 Reel quantity 2000 MAPD-007985-CT30TB Customer Test Board 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.