UNISONIC TECHNOLOGIES CO., LTD MC34074 Preliminary LINEAR INTEGRATED CIRCUIT HIGH SLEW RATE, WIDE BANDWIDTH, SINGLE SUPPLY OPERATIONAL AMPLIFIER SOP-14 DESCRIPTION The UTC MC34074 offer 4.5MHz of gain bandwidth product, 13V/μs slew rate and fast setting time without the use of JFET device technology. Although it can be operated from split supplies, it is particularly suited for single supply operation, since the common mode input voltage range includes ground potential (VEE). With A Darlington input stage, it exhibits high input resistance, low input offset voltage and high gain. The all NPN output stage, characterized by no deadband crossover distortion and large output voltage swing, provides high capacitance drive capability, excellent phase and gain margins, low open loop high frequency output impedance and symmetrical source/sink AC frequency response. DIP-14 Lead-free: MC34074L Halogen-free: MC34074G FEATURES *Wide bandwidth: 4.5MHz *High slew rate: 13V/μs *Fast settling time:1.1μs to 0.1% *Wide single supply operation: 3.0V to 44V *Wide input common mode voltage range: Includes Ground (VEE) *Low input offset voltage: 3.0mV maximum *Large output voltage swing: -14.7V to +14V (with +-15V supplies) *Large Capacitance Drive Capability: 0pF to 10,000pF *Low total harmonic distortion: 0.02% *Excellent phase margin: 60° *Excellent gain margin: 12dB *Output short circuit protection *ESD Diodes/Clamps provide input protection ORDERING INFORMATION Normal MC34074-D14-T MC34074-S14-R Ordering Number Lead Free Plating MC34074L-D14-T MC34074L-S14-R www.unisonic.com.tw Copyright © 2009 Unisonic Technologies Co., Ltd Halogen-Free MC34074G-D14-T MC34074G-S14-R Package Packing DIP-14 SOP-14 Tube Tape Reel 1 of 10 QW-R105-018.Ba MC34074 Preliminary LINEAR INTEGRATED CIRCUIT PIN CONFIGURATIONS Figure 1. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 10 QW-R105-018.Ba MC34074 Preliminary LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL VALUE UNIT Supply Voltage (from VEE to VCC) Vs +44 V Differential Input Voltage VIDR Note 2 V Input Voltage VIR Note 2 V Output Short Circuit Duration (Note 3) tSC Indefinite sec Junction Temperature TJ +150 °C Operating Temperature TOPR -20 ~ +85 °C Storage Temperature Range TSTG -60 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Either or both input voltages should not exceed the magnitude of VCC or VEE. 3. Power dissipation must be considered to ensure maximum junction temperature (Tj) is not exceeded. (see Figure 2) ELECTRICAL CHARACTERISTICS(Cont.) (VCC=+15V, VEE=-15V, RL=connected to ground, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS VCC=+15V,VEE=-15V,TA=+25°C RS=100Ω, VCC=+5V,VEE=0V, TA=+25°C Input Offset Voltage VI(OFF) VCM=0V, VCC=+15V,VEE=-15V,TA=0°C to Vo=0V 70°C Average Temperature RS=10Ω,VCM=0V,VOUT=0V, Coefficient of Input Offset ΔVI(OFF)/ΔT TA=0°C to 70°C Voltage VCM=0V, Vo=0V, Input Bias Current II(BIAS) TA=+25°C TA=0°C to 70°C VCM=0V, Vo=0V, Input Offset Current II(OFF) TA=+25°C TA=0°C to 70°C TA=+25°C Input Common Mode Voltage VI(CM) TA=0°C to 70°C VOUT=±10V, RL=2.0kΩ, Large Signal Voltage Gain GV TA=+25°C TA=0°C to 70°C VCC=+5.0V,VEE=0V,RL=2.0kΩ, TA=+25°C VCC=+15.0V,VEE=-15V, Output Voltage Swing VOH RL=10kΩ, TA=+25°C (VID=+-1.0V) VCC=+15.0V,VEE=-15V, RL=2.0kΩ, TA=0°C to 70°C VCC=+5.0V,VEE=0V,RL=2.0kΩ, TA=+25°C VCC=+15.0V,VEE=-15V, Output Voltage Swing RL=10kΩ,TA=+25°C (VID=+-1.0V) VOL VCC=+15.0V,VEE=-15V, RL=2.0kΩ, TA=0°C to 70°C VID=1.0V,VOUT=0V, TA=25°C Source Output Short Circuit current ISC Sink Common Mode Rejection CMR RS<=10kΩ,VCM=VICR,TA=25°C VCC/VEE=+16.5V/-16.5V to +13.5/-13.5V, Power Supply Rejection PSR (RS=100Ω) TA=25°C UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX 0.5 3.0 0.5 3.0 5.0 UNIT mV mV mV μV/°C 10 500 700 nA 50 300 VEE to (VCC –1.8) VEE to (VCC –2.2) nA 100 6.0 50 25 3.7 13.6 V V V/mV 100 4.0 V 14 V 13.4 V 0.1 0.3 V -14.7 -14.3 V -13.5 V 10 20 80 30 30 97 80 97 mA dB dB 3 of 10 QW-R105-018.Ba MC34074 Preliminary LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) PARAMETER SYMBOL Power Supply Current (Per Amplifier, No Load) ID Slew Rate SR Setting Time ts Gain Bandwidth Product Power Bandwidth GBW BW TEST CONDITIONS MIN VCC=+5.0V,VEE=0V,VOUT=+2.5V, TA=+25°C VCC=+15.0V,VEE=-15V, VOUT=0V,TA=+25°C VCC=+15.0V,VEE=-15V, VOOUT=0V, TA=0°C to 70°C Vin=-10V to +10V, Av=+1.0 8.0 RL=2.0kΩ, CL=500pF Av=-1.0 10 Setp, Av=-1.0 to 0.1% (+1/2 LSB of 9-Bits) to 0.01% (+1/2 LSB of 12-Bits) f=100kHz 3.5 Av=+1.0, RL=2kΩ, VOUT=20Vpp, THD=5.0% RL=2kΩ RL=2kΩ, CL=300pF RL=2kΩ RL=2kΩ, CL=300pF TYP MAX 1.6 2.0 1.9 10 13 1.1 2.2 4.5 160 60 40 12 4 UNIT mA 2.5 mA 2.8 mA V/μs μs MHz kHz Deg Phase Margin fm Gain Margin Am Equivalent Input Noise Voltage eN Rs=100Ω, f=1.0kHz Equivalent Input Noise Current in f=1.0kHz 0.22 Differential Input Resistance Differential Input Capacitance RIN CIN 150 2.5 pA/√Hz MΩ pF Total Harmonic distortion GN 0.02 % Channel Separation Open Loop Output Impedance IZoI VCM=0V VCM=0V Av=+10, RL=2.0kHz, f=10kHz f=10kHz f=1.0MHz 120 30 dB W UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 32 2.0Vpp≤Vo≤20Vpp, dB nV/√Hz 4 of 10 QW-R105-018.Ba MC34074 Preliminary LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS Input Common Mode Voltage Range vs. Temperature Normalized Input Bias Current vs. Temperature 1.3 VCC VCC VCC/VEE = +1.5V/-1.5V to +22V/-22V VCC = +15V VEE = -15V VCM = 0 1.2 VCC-0.8 1.1 VCC-1.6 1.0 VCC-2.4 0.9 VEE+0.1 0.8 VEE VEE -55 -25 0 25 50 75 100 0.7 -50 125 0 25 50 75 100 125 Ambient Temperature, TA (℃) Ambient Temperature, TA (℃) Normalized Input Bias Current vs. Input Common Mode Voltage Split Supply Output Voltage Swing vs. Supply Voltage 50 VCC = +15V VEE = -15V TA = 25℃ 1.2 1.0 0.8 0.6 Output Voltage Swing, VOUT (VPP) 1.4 Input Bias Curent, II(BIAS) (Normalized) -25 RL Connected to Ground TA = 25℃ 40 30 RL = 2.0k RL = 10k 20 10 0 -12 -8.0 -4.0 0 4.0 8.0 12 Input Common Mode Voltage, VI(CM) (V) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 0 5.0 10 15 20 25 Supply Voltage, VCC, |VEE| (V) 5 of 10 QW-R105-018.Ba MC34074 Output Saturation Voltage, Vsat (V) 0 Single Supply Output Saturation versus Load Resistance to Ground Output Short Circuit Current versus Temperature 60 VCC Output Current, ISC (mA) Output Saturation Voltage, Vsat (V) LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS(Cont.) Output Saturation Voltage, Vsat (V) Preliminary -0.4 -0.2 2.0 VCC = +15V RL to VCC TA = 25℃ 1.0 50 Sink 40 Source 30 20 VCC = +15V VEE = -15V RL ≤ 0.1Ω ΔVin = 1.0V 10 Gnd 100 1.0k 10k 100k 0 -55 Load Resistance To VCC, RL (Ω) 50 -25 0 25 50 75 100 125 Load Resistance To Ground, RL (Ω) Output Voltage Swing versus Frequency Output Impedance versus Frequency 28 VCC = +15V VEE = -15V 40 VCM = 0 VO = 0 ΔIO = ±0.5mA 30 TA = 25℃ VCC = +15V VEE = -15V AV = +1.0 RL = 2.0k THD ≤ 1.0% TA = 25℃ 24 20 16 12 20 AV = 1000 AV = 100 AV = 10 AV = 1.0 8.0 10 4.0 1.0k 10k 100k 1.0M 10M Frequency, f (Hz) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 0 3.0k 10k 30k 100k 300k 1.0M 3.0M Frequency, f (Hz) 6 of 10 QW-R105-018.Ba MC34074 Preliminary LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS(Cont.) Total Harmonic Distortion versus Output Voltage Swing Total Harmonic Distortion versus Frequency 0.4 4.0 VCC = +15V VEE = -15V RL = 2.0k TA = 25℃ AV = 1000 0.3 3.0 0.2 AV = 100 VCC = +15V VEE = -15V VO = 2.0VPP RL = 2.0k TA = 25℃ AV = 1000 2.0 AV = 100 1.0 0.1 AV = 10 AV = 10 AV = 1.0 AV = 1.0 0 100 1.0k 10k 100k 0 8.0 12 16 20 Output Voltage Swing,VO (VPP) Open Loop Voltage Gain, AVOL (dB) Frequency, f (Hz) Open Loop Voltage Gain, AVOL (dB) 4.0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Excess Phase, φ (Degrees) 10 7 of 10 QW-R105-018.Ba MC34074 TYPICAL CHARACTERISTICS(Cont.) 14 Phase Margin versus Temperature Gain Margin versus Load Capacitance 80 VCC = +15V VEE = -15V AV = +1.0 RL = 2.0k to ∞ VO = -10V to +10V TA = 25℃ 12 Gain Margin, Am (dB) LINEAR INTEGRATED CIRCUIT 10 8.0 6.0 4.0 2.0 10 100 1.0k 10k Load Capacitance, CL (pF) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Phase Margin, φm (Degrees) Preliminary CL = 10pF CL = 100pF 60 VCC = +15V VEE = -15V AV = +1.0 RL = 2.0k to ∞ CL = 1000pF VO = -10V to +10V 40 20 CL = 10000pF 0 -55 -25 0 25 50 75 100 125 Ambient Temperature, TA (℃) 8 of 10 QW-R105-018.Ba MC34074 Preliminary TYPICAL CHARACTERISTICS(Cont.) Output Settling Time Normalized Slew Rate versus Temperature 1.15 VCC = +15V VEE = -15V AV = +1.0 RL = 2.0k CL = 500pF 1.1 1.05 1.0 0.95 0.9 0.85 -55 -25 0 25 75 50 100 125 Output Voltage Awing From 0V, ΔVO (V) Slew Rate, SR (Normalized) LINEAR INTEGRATED CIRCUIT 10 VCC = +15V VEE = -15V AV = -1.0 1.0mV 10mV 1.0mV 5.0 TA = 25℃ Compensated 0 Uncompensated 1.0mV -5.0 10mV 1.0mV -10 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Settling Time, tS (μs) Ambient Temperature, TA (℃) Small Signal Transient Response Large Signal Transient Response VCC = +15V VEE = -15V AV = +1.0 RL = 2.0k CL = 300pF 0 TA = 25℃ 0 VCC = +15V VEE = -15V AV = +1.0 RL = 2.0k CL = 300pF TA = 25℃ 2.0μs/DIV 1.0μs/DIV Common Mode Rejection versus Frequency 100 80 100 TA = 125 VCC = +15V VEE = -15V VCM = 0V ΔVCM = ±1.5V TA = 25 TA = -55 60 40 VCC = +15V VEE = -15V 80 TA = 25 ΔVCC ADM + 60 ADM + ΔVCM 20 CMR = 20Log 0 0.1 Power Supply Rejection versus Frequency 1.0 10 ΔVCM ΔVO 100 ΔVEE 40 ΔVO +PSR = 20Log 20 × ACM 1.0k -PSR = 20Log 10k 100k 1.0M 10M Frequency, f (Hz) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw (ΔVCC = +1.5V) ΔVO 0 0.1 1.0 10 +PSR ΔVO/ADM ΔVCC ΔVO/ADM ΔVEE 100 1.0k -PSR (ΔVEE = +1.5V) 10k 100k 1.0M 10M Frequency, f (Hz) 9 of 10 QW-R105-018.Ba MC34074 Preliminary LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS(Cont.) Power Supply Rejection versus Temperature Supply Current versus Supply Voltage 105 Power Supply Rejection, PSR (dB) Supply Current, ICC (mA) 9.0 TA = -55℃ 8.0 7.0 TA = 25℃ 6.0 TA = 125℃ 5.0 4.0 0 5.0 10 15 20 25 Supply Voltage, VCC, |VEE| (V) -PSR (ΔVEE = +1.5V) VCC = +15V VEE = -15V 95 +PSR (ΔVCC = +1.5V) 85 +PSR = 20Log 75 -PSR = 20Log 65 -55 -25 0 ΔVO/ADM ΔVCC ΔVO/ADM ΔVCC ADM ΔVO + ΔVEE ΔVEE 25 50 75 100 125 Ambient Temperature, TA (℃) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 10 of 10 QW-R105-018.Ba