MD54-0003 MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V5 Functional Diagram Features • • • • • • Low Conversion Loss Input Power @ 1 dB Compression: +21 dBm Typical Two-Tone IM Ratio: > 50 dBc LO Drive Level: +11 to +23 dBm DC - 200 MHz IF Bandwidth Low Cost Plastic SOIC-8 Package C L R Description M/A-COM’s MD54-0003 is a passive mixer that achieves the performance of a double balanced diode mixer in a low cost surface mount plastic SOIC-8 lead package. The MD54-0003 is ideally suited for use where high level RF signals and very wide dynamic range are required. Typical applications include frequency up/down conversion, modulation, demodulation in systems such as base station receivers and transmitters for DCS1800, PCS and PHS applications. The MD54-0003 uses FETs as mixing elements to achieve very wide dynamic range in a low cost plastic package. The mixer operates with LO drive levels of +11 dBm to +23 dBm. No DC bias is required. M/A-COM’s MD54-0003 is fabricated using a mature 1-micron GaAs process. The process features full IC passivation for increased performance and reliability. Ordering Information 1 Part Number Package MD54-0003 Bulk Packaging MD54-0003 TR 1000 piece reel MD54-0003 SMB Designer’s Kit 8 7 6 5 1 2 3 4 External matching network on LO Port: R = 330 ohms, L = 3 nH, C = 3.3 pF Pin Configuration Pin No. Function Pin No. Function 1 GND 5 GND 2 RF 6 LO 3 GND 7 IF 4 GND 8 GND 1. Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD54-0003 MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V5 Electrical Specifications: Test Conditions: RF = 1850 MHz (-10 dBm), LO = 1710 MHz (13 dBm), IF = 140 MHz, TA = +25°C Parameter Test Conditions Units Min Typ Max Conversion Loss — dB — 8.5 9.5 Isolation LO to RF LO to IF RF to IF dB dB dB 20 — — 27 12 10 — — — VSWR LO Port RF Port IF Port Ratio Ratio Ratio — — — 2.5:1 2.0:1 2.0:1 — — — Input 1 dB Compression RF Freq. = 1800 MHz, LO = +13 dBm dBm — +21 — Two-Tone IM Ratio2 Two tones at –10 dBm each, Tone spacing 100 kHz, IF = 140 MHz dBc 50 65 — 2. IMR vs RF drive level can be calculated by the formula: IMR = 50 - (1.5 x P IN ) Absolute Maximum Ratings 3 Absolute Maximum RF Input Power 4 +22 dBm 4 +23 dBm LO Drive Power Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. Total power for RF and LO ports should not exceed +23 dBm. Harmonic of LO Parameter Spurious Table 4x 17 6.9 48.2 47.2 62.3 61.1 71.7 61.7 73.4 63.4 3x 10.3 0.3 28.9 28.9 63.0 61.3 71.3 63.5 70.6 61.6 2x -8.8 -18.8 25.7 25.9 52.1 61.3 71.5 61.5 72.1 62.1 1x -13.1 -23.1 0 0 67.5 61.1 71.3 61.9 72.6 62.6 0x X X 2.1 2.1 56.8 61.7 72.3 62.3 69.3 59.8 0x 1x 2x 3x 4x Harmonic of RF Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated by the number of dB below the conversion loss. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of -5 dBm, the lower number is for -15 dBm. |mFRF - nFLO |, RF = -5 dBm |mFRF - nFLO |, RF = -15 dBm RF Frequency = 1850 MHz LO Frequency = 1710 MHz 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD54-0003 MMIC Medium Level Mixer 1700 - 2000 MHz Rev. V5 Typical Performance Curves Isolation vs. Frequency Conversion Loss vs. Frequency 11 30 25 10 20 9 15 10 8 5 7 1700 1750 1800 1850 1900 1950 0 1700 2000 RF TO IF LO TO IF LO TO RF 1750 1800 1850 1900 1950 2000 RF Frequency (MHz) RF Frequency (MHz) Input P1dB RF, LO and IF VSWR vs. Frequency, LO = +13 dBm 25.0 IF Frequency (MHz) 0 50 100 150 200 250 300 1850 1900 1950 2000 5 22.5 LO RF IF 4 20.0 3 2 17.5 1 15.0 1700 1750 1800 1850 1900 RF Frequency (MHz) 1950 2000 0 1700 1750 1800 RF Frequency (MHz) SO-8 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.