MURATA MEA1D1512SC

MEA1 Series
www.murata-ps.com
1kVDC Isolated 1W Dual Output DC/DC Converters
Power density to 0.85W/cm3
Wide temperature performance at full
1 Watt load, –40°C to 85°C
UL 94V-0 package material
No heatsink required
Industry standard pinout
Power sharing on output
5V,12V, 15V, 24V, & 48V input
5V, 9V, 12V, & 15V output
Fully encapsulated with toroidal
magnetics
No external components required
No electrolytic or tantalum capacitors
PRODUCT OVERVIEW
The MEA series is the new high performance
version of our 1W NMA series. The MEA series
is more efficient and offers improved regulation
performance ≤5% for applications where a wide
output voltage variation can not be tolerated. They
are ideally suited for providing dual rail supplies
with the added benefit of galvanic isolation to
reduce switching noise. All of the rated power
may be drawn from a single output providing the
total load does not exceed 1 watt.
233
228
228
225
98
95
93
94
78
76
76
75
49
47
47
47
26
25
25
25
232
227
226
224
97
95
93
94
78
76
76
75
49
48
47
47
mVp-p
25
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
20
20
20
25
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
%
pF
kHrs
85
86.5
87
87
85
86.5
89
88
84
87
87.5
89.5
84.5
87.5
87
88.5
80
82
83
83.5
85
86.7
87
87.5
84.5
86.5
89
88
84
87
87.5
89.5
84.5
87
87
88
53
51
45
46
44
61
88
78
40
65
75
104
47
80
85
106
44
72
91
109
52
49
47
46
43
64
89
76
42
50
77
106
47
77
83
100
3663
3291
2860
2374
3352
3083
2701
2264
Package Style
%
82
84
84
84
81
83
85
84
80
82
83
85
81
84
84
85
77
79
78
80
82
84
84
84
81
83
85
84
80
82
83
85
81
84
84
85
MTTF2
12
8
6
6
9
7
6
5
8
7
5
5
9
7
4
3
14
8
7
6
12
9
7
6
9
7
6
6
9
6
6
6
10
8
6
6
Efficiency (Min.)
5.4
4.5
5
4.5
4
3
3.5
3
3.5
2.5
2.5
2.5
3.5
2.5
2.5
2.5
4
3
3
2.5
6.2
5
5.3
5.3
4.5
3.5
3.5
3
4
3
2.7
2.7
4
3.8
2.5
2.3
%
4.8
3.7
4
3.8
3.5
2.5
2.6
2.2
3
2.1
2
2
2.8
1.8
1.6
1.5
2.6
1.6
1.6
1.3
5
3.9
4.2
4.1
3.6
2.6
2.7
2.3
3.1
2.2
2
2
2.8
2
1.6
1.5
Ripple & Noise
(Max)1
Load Regulation
(Typ)
Input Current at
Rated Load
Output Current
mA
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
Isolation
Capacitance
Typical efficiency to 89.5%
mA
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
Efficiency (Typ.)
RoHS compliant
V
5
5
5
5
12
12
12
12
15
15
15
15
24
24
24
24
48
48
48
48
5
5
5
5
12
12
12
12
15
15
15
15
24
24
24
24
Ripple & Noise
(Typ)1
UL 60950 recognized
V
Load Regulation
(Max)
FEATURES
MEA1D0505SC
MEA1D0509SC
MEA1D0512SC
MEA1D0515SC
MEA1D1205SC
MEA1D1209SC
MEA1D1212SC
MEA1D1215SC
MEA1D1505SC
MEA1D1509SC
MEA1D1512SC
MEA1D1515SC
MEA1D2405SC
MEA1D2409SC
MEA1D2412SC
MEA1D2415SC
MEA1D4805SC
MEA1D4809SC
MEA1D4812SC
MEA1D4815SC
MEA1D0505DC
MEA1D0509DC
MEA1D0512DC
MEA1D0515DC
MEA1D1205DC
MEA1D1209DC
MEA1D1212DC
MEA1D1215DC
MEA1D1505DC
MEA1D1509DC
MEA1D1512DC
MEA1D1515DC
MEA1D2405DC
MEA1D2409DC
MEA1D2412DC
MEA1D2415DC
Output
Voltage
Order Code
Nominal Input
Voltage
SELECTION GUIDE
SIP
DIP
1. See Ripple & Noise characterisation method.
2. Calculated using MIL-HDBK-217F FN2 with nominal input voltage at full load.
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: [email protected], tel: +44 (0)1908 615232
2010-07-08
KDC_MEA1.C03 Page 1 of 8
MEA1 Series
1kVDC Isolated 1W Dual Output DC/DC Converters
INPUT CHARACTERISTICS
Parameter
Conditions
Min.
Typ.
Max.
Continuous operation, 5V input types
Continuous operation, 12V input types
Continuous operation, 15V input types
Continuous operation, 24V input types
Continuous operation, 48V input types
5V input types
12V input types
15V input types
24V input types
48V input types
4.5
10.8
13.5
21.6
43.2
5
12
15
24
48
4
4
3
3
22
5.5
13.2
16.5
26.4
52.8
12
12
10
10
35
Parameter
Conditions
Min.
Typ.
Max.
Units
Rated Power
Voltage Set Point Accuracy
Line regulation
TA=-40°C to 85°C
See tolerance envelope
High VIN to low VIN
1
W
1.05
1.1
%/%
Typ.
Max.
Units
Voltage range
Reflected ripple current
Units
V
mA p-p
OUTPUT CHARACTERISTICS
ISOLATION CHARACTERISTICS
Parameter
Conditions
Min.
Isolation test voltage
Resistance
Flash tested for 1 second
Viso= 1000VDC
1000
10
Conditions
Min.
VDC
GΩ
GENERAL CHARACTERISTICS
Parameter
MEA1D05xxxC, MEA1D1212xC, MEA1D1515xC
Switching frequency
Typ.
Max.
Units
65
MEA1D1205xC, MEA1D1209xC, MEA1D1215xC, MEA1D1505xC,
MEA1D1509xC, MEA1D1512xC, MEA1D24xxxC
MEA1D48xxxC
kHz
85
60
TEMPERATURE CHARACTERISTICS
Parameter
Conditions
Min.
Specification
Storage
Case Temperature above ambient
Cooling
All output types
-40
-50
Typ.
Max.
Units
85
125
20
°C
Free air convection
ABSOLUTE MAXIMUM RATINGS
Lead temperature 1mm from case for 10 seconds
Input voltage VIN, 5Vin types
Input voltage VIN, 12Vin types
Input voltage VIN, 15Vin types
Input voltage VIN, 24Vin types
Input voltage VIN, 48Vin types
www.murata-ps.com
260°C
7V
15V
18V
28V
54V
Technical enquiries email: [email protected], tel: +44 (0)1908 615232
2010-07-08
KDC_MEA1.C03 Page 2 of 8
MEA1 Series
1kVDC Isolated 1W Dual Output DC/DC Converters
TEMPERATURE DERATING GRAPH
TOLERANCE ENVELOPE
5%
85°C
1.0
0.5
Output Voltage
Output Power (W)
1.5
l Loa
VNOM
d Lin
e
0%
Safe Operating Area
10
0
-40
2%
Typic
a
100
50
0
Ambient Temperature (°C)
150
25
50
75
-4%
100
Output Load Current (%)
The voltage tolerance envelope shows typical load regulation characteristics for this
product series. The tolerance envelope is the maximum output voltage variation due
to changes in output loading.
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage,
applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Murata Power Solutions MEA1 series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 1kVDC for 1 second.
A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”
The MEA1 has been recognized by Underwriters Laboratory for functional insulation, both input and output should normally be maintained within SELV limits i.e. less than 42.4V
peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system.
The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier; but then the circuitry on both sides of the barrier
must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according
to safety standard requirements.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials,
construction and environment. The MEA1 series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enameled wire. While
parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically
polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We
therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specified test voltage.
This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further
insulation system of physical spacing or barriers.
SAFETY APPROVAL
The MEA1 series has been recognized by Underwriters Laboratory (UL) to UL 60950 for functional insulation in a maximum ambient temperature of 85°C and/or case temperature
limit of 130°C (case temperature measured on the face opposite the pins). File number E179522 applies.
The MEA1 Series of converters are not internally fused so to meet the requirements of UL 60950 an anti-surge input line fuse should always be used with ratings as defined below.
MEA1D05xxxC: 1A
MEA1D12xxxC: 0.375A
MEA1D15xxxC: 0.375A
MEA1D24xxxC: 0.2A
MEA1D48xxSC: 0.1A
All fuses should be UL approved and rated to at least the maximum allowable DC input voltage.
www.murata-ps.com
Technical enquiries email: [email protected], tel: +44 (0)1908 615232
2010-07-08
KDC_MEA1.C03 Page 3 of 8
MEA1 Series
1kVDC Isolated 1W Dual Output DC/DC Converters
APPLICATION NOTES
Minimum load
The minimum load to meet datasheet specification is 10% of the full rated load across the specified input voltage range. Lower than 10% minimum loading will result in
an increase in output voltage, which may rise to typically double the specified output voltage if the output load falls to less than 5%.
Capacitive loading and start up
Typical start up times for this series, with a typical input voltage rise time of 2.2μs and output capacitance of 10μF, are shown in the table below. The product
series will start into a capacitance of 47μF with an increased start time, however, the maximum recommended output capacitance is 10μF.
MEA1D0505xC
MEA1D0509xC
MEA1D0512xC
MEA1D0515xC
MEA1D1205xC
MEA1D1209xC
MEA1D1212xC
MEA1D1215xC
MEA1D1505xC
MEA1D1509xC
Start-up time
μs
939
2872
5325
8895
1150
3716
6912
10810
883
3160
MEA1D1512xC
MEA1D1515xC
MEA1D2405xC
MEA1D2409xC
MEA1D2412xC
MEA1D2415xC
MEA1D4805xC
MEA1D4809xC
MEA1D4812xC
MEA1D4815xC
Start-up time
μs
5630
8585
472
1473
2643
4348
586
1705
2995
4722
Typical Start-Up Wave Form
Ripple & Noise Characterisation Method
Ripple and noise measurements are performed with the following test configuration.
C1
1μF X7R multilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC/DC converter
10μF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC/DC converter with an ESR of less
C2
than 100mΩ at 100 kHz
C3
100nF multilayer ceramic capacitor, general purpose
R1
450Ω resistor, carbon film, ±1% tolerance
R2
50Ω BNC termination
T1
3T of the coax cable through a ferrite toroid
RLOAD
Resistive load to the maximum power rating of the DC/DC converter. Connections should be made via twisted wires
Measured values are multiplied by 10 to obtain the specified values.
Differential Mode Noise Test Schematic
DC/DC Converter
OSCILLOSCOPE
C1 C2 C3
+
SUPPLY
Input
-
+
R1
T1
R2
Y INPUT
Output
-
R LOAD
www.murata-ps.com
Technical enquiries email: [email protected], tel: +44 (0)1908 615232
2010-07-08
KDC_MEA1.C03 Page 4 of 8
MEA1 Series
1kVDC Isolated 1W Dual Output DC/DC Converters
APPLICATION NOTES (continued)
Output Ripple Reduction
By using the values of inductance and capacitance stated, the output ripple at the rated load is lowered to 5mV p-p max.
Component selection
Capacitor: It is required that the ESR (Equivalent Series Resistance) should be as low as possible, ceramic types are recommended.
The voltage rating should be at least twice (except for 15V output), the rated output voltage of the DC/DC converter.
Inductor: The rated current of the inductor should not be less than that of the output of the DC/DC converter. At the rated current, the DC resistance of the inductor
should be such that the voltage drop across the inductor is <2% of the rated voltage of the DC/DC converter. The SRF (Self Resonant Frequency) should be
>20MHz.
L
Power
Source
MEA1D0505xC
MEA1D0509xC
MEA1D0512xC
MEA1D0515xC
MEA1D1205xC
MEA1D1209xC
MEA1D1212xC
MEA1D1215xC
MEA1D1505xC
MEA1D1509xC
MEA1D1512xC
MEA1D1515xC
MEA1D2405xC
MEA1D2409xC
MEA1D2412xC
MEA1D2415xC
MEA1D4805xC
MEA1D4809xC
MEA1D4812xC
MEA1D4815xC
L, μH
10
22
47
47
10
22
47
47
10
22
47
47
10
22
47
47
10
22
47
47
Inductor
SMD
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
DC
C
Load
DC
Through Hole
11R103C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
Capacitor
C, μF
4.7
2.2
1
1
4.7
2.2
1
1
4.7
2.2
1
1
4.7
2.2
1
1
4.7
2.2
1
1
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of
260°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped
over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in
this series are backward compatible with Sn/Pb soldering systems.
For further information, please visit www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: [email protected], tel: +44 (0)1908 615232
2010-07-08
KDC_MEA1.C03 Page 5 of 8
MEA1 Series
1kVDC Isolated 1W Dual Output DC/DC Converters
EFFICIENCY VS LOAD
MEA 5V Input Voltage
MEA 12V Input Voltage
90
90
80
80
15V
12V
9V
5V
60
50
70
Efficiency (%)
Efficiency (%)
70
40
30
40
30
20
10
10
0
10
20
30
40
50
60
Load (%)
70
80
90
0
100
MEA 15V Input Voltage
10
20
30
40
50
60
Load (%)
70
80
90
100
70
80
90
100
90
80
80
70
15V
12V
9V
5V
50
70
Efficiency (%)
60
40
30
15V
12V
9V
5V
60
50
40
30
20
20
10
10
0
0
MEA 24V Input Voltage
90
Efficiency (%)
50
20
0
15V
12V
9V
5V
60
0
10
20
30
40
50
60
70
80
90
100
Load (%)
0
0
10
20
30
40
50
60
Load (%)
MEA 48V Input Voltage
90
80
Efficiency (%)
70
15V
12V
9V
5V
60
50
40
30
20
10
0
0
10
20
30
40
50
60
70
80
90
100
Load (%)
www.murata-ps.com
Technical enquiries email: [email protected], tel: +44 (0)1908 615232
2010-07-08
KDC_MEA1.C03 Page 6 of 8
MEA1 Series
1kVDC Isolated 1W Dual Output DC/DC Converters
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
PIN CONNECTIONS - 14 PIN DIP
SIP package
DIP package
0.776 (19.70) Max.
0.774
(19.65)
MEA1D0505DC
0.394
(10.00)
Max.
XYYWW
0.242
(6.15)
Max. †
0.276
(7.0)
Max.
0.022 (0.55)
0.018 (0.45)
0.043
(1.09)
1
0.0016
(0.40)
Min.
14
2
0.181 (4.60)
0.141 (3.60)
4 5 6
0.1 (2.54)
0.022 (0.55)
0.0178 (0.45)
0.0607 (1.5438)
0.099 (2.5162)
7
0.3 (7.62)
0.092 (2.33)
0.076 (1.93)
XYYWW
1
0.1 (2.54)
11
0.6 (15.24)
9 8
0.0118 (0.30)
0.0079 (0.20)
0.057 (1.45)
0.039 (1.00)
All dimensions in inches ±0.01 (mm ±0.25mm). All pins on a 0.1 (2.54) pitch and within ±0.01 (0.25) of true position.
†
48V input variants 0.301 (7.65)
www.murata-ps.com
Function
1
-VIN
7
NC
8
OV
9
+VOUT
11
-VOUT
14
+VIN
MEA1D0505SC
0.4
(10.15)
0.181 (4.60)
0.142 (3.60)
Pin
0.0118 (0.30)
0.0079 (0.20)
PIN CONNECTIONS - 7 PIN SIP
Pin
Function
1
+VIN
2
-VIN
4
-VOUT
5
OV
6
+VOUT
0.5 (12.70)
Weight: 2.5g (DIP) 2.3g (SIP)
48V input: 2.8g
Technical enquiries email: [email protected], tel: +44 (0)1908 615232
2010-07-08
KDC_MEA1.C03 Page 7 of 8
MEA1 Series
1kVDC Isolated 1W Dual Output DC/DC Converters
PACKAGE SPECIFICATIONS (continued)
RECOMMENDED FOOTPRINT DETAILS
7 Pin SIP Package
14 Pin DIP Package
0.045 (1.15)
Ø 0.039 (1.00)
5 HOLES
0.045 (1.15)
Ø 0.039 (1.00)
5 HOLES
0.00394 (0.1)
0.00394 (0.1
0.1 (2.54)
0.1 (2.54)
0.1 (2.54)
0.1 (2.54)
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
TUBE OUTLINE DIMENSIONS
7 Pin SIP Tube
14 Pin DIP Tube
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Tube length (14 Pin DIP) : 20.47 (520mm ±2mm).
Tube length (7 Pin SIP) : 20.47 (520mm ±2mm).
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/locations
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Tube length : 20.47 (520mm ±2mm).
Tube Quantity : 25
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2010 Murata Power Solutions, Inc.
Technical enquiries email: [email protected], tel: +44 (0)1908 615232
2010-07-08
KDC_MEA1.C03 Page 8 of 8