Series ML-100 Mini-Link™ Miniature Jumpers FEATURES: • Mini-Link™ miniature jumpers are useful for jumpering .025 [.63] square pins on .100 [2.54] centers. • Used to jumper from row-to-row or from pin-to-pin. • Their miniature size makes it possible to st ack one on top of the other. • A convenient test probe slot is provided as well. • Mini-Links™ are available from the factory with or without a handle, used for ease of inserting or extracting. • Sold in multiples of 50. SPECIFICATIONS: • Body material is black UL 94V-0 Glass-filled 4/6 Nylon. • Contacts are Beryllium Copper Alloy 174, spring tempered, per ASTM B768. • Standard contact plating is 20μ [.51μm] Gold per MIL-G-45204 over 50μ [1.27μm] min. Nickel per SAE-AMS-QQ-N-290. • Current rating=3 Amps. • Operating temperature= -67°F to 257°F [-55°C to 125°C] • Insertion Force=210 ± 40 grams/pin. • Withdrawal Force=180 ± 40 grams/pin. • Minimum insertion depth=.075 [1.91]. ALL DIMENSIONS: Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice. ORDERING INFORMATION Part Number ML-100 ML-100S Plating GOLD GOLD Handle YES NO INCHES [MILLIMETERS] All tolerances ± .005 [.13] unless otherwise specified Bristol, PA USA TEL: (215) 781-9956 FAX: (215) 781-9845 abc 16002 REV. C PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED http://www.arieselec.com • [email protected]