LITTELFUSE 2920L300DRHF

POLYFUSE® Resettable PTCs
Surface Mount > 2920L Series
2920L Series
Description
The 2920L Series PTC provides surface mount overcurrent
protection for medium voltage (≤60V) applications where
resettable protection is desired.
Features
Agency Approvals
Applications
AGENCY
• IEE1394 port protection
• Powered ethernet port
protection (IEEE 802.3 af)
• Automotive electronic
control module protection
AGENCY FILE NUMBER
E183209
R50119118
• High voltage
• Low-profile
2920L Series
• RoHS compliant, lead-free
and halogen-free
• Fast response to fault
currents
• Low voltage telecom
equipment protection
Electrical Characteristics
I trip
(A)
V max
(Vdc)
I max
(A)
Pd
max.
(W)
Part Number
Marking
I hold
(A)
2920L030
LF030
0.30
0.60
60
10
2920L050
LF050
0.50
1.00
60
10
2920L075
LF075
0.75
1.50
30
2920L075/60
LF075-60
0.75
1.50
2920L100
LF100
1.10
2.20
2920L125
LF125
1.25
2920L150
LF150
1.50
2920L185
LF185
1.85
2920L200
LF200
2920L200/24
Maximum Time
To Trip
Agency
Approvals
Resistance
R min
(Ω)
R typ
(Ω)
R 1max
(Ω)
3.00
1.200
3.000
4.800
X
X
4.00
0.350
0.870
1.400
X
X
8.00
0.30
0.350
0.670
1.000
X
X
1.50
8.00
0.30
0.300
0.60
0.950
X
X
40
1.50
8.00
0.50
0.120
0.270
0.410
X
X
15
40
1.50
8.00
2.00
0.070
0.160
0.250
X
X
33
40
1.50
8.00
2.00
0.080
0.150
0.230
X
X
33
40
1.50
8.00
2.50
0.065
0.110
0.150
X
X
4.00
15
40
1.50
8.00
5.00
0.050
0.090
0.125
X
X
2.00
4.00
24
40
1.50
8.00
5.00
0.050
0.090
0.125
X
X
LF250
2.50
5.00
15
40
1.50
8.00
10.00
0.035
0.060
0.085
X
X
LF260
2.60
5.00
6
40
1.50
8.00
10.00
0.025
0.050
0.075
X
X
Current
(A)
Time
(Sec.)
1.50
1.50
1.50
2.50
40
1.50
60
10
33
2.50
3.00
3.70
2.00
LF200-24
2920L250
2920L260
2920L300
LF300
3.00
5.00
6
40
1.50
8.00
20.00
0.015
0.033
0.048
X
X
2920L300/15
LF300-15
3.00
5.00
15
40
1.50
8.00
20.00
0.015
0.033
0.048
X
X
I hold = Hold current: maximum current device will pass without tripping in 20°C still air.
I trip = Trip current: minimum current at which the device will trip in 20°C still air.
V max = Maximum voltage device can withstand without damage at rated current (I max)
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
P d = Power dissipated from device when in the tripped state at 20°C still air.
R min = Minimum resistance of device in initial (un-soldered) state.
R typ = Typical resistance of device in initial (un-soldered) state.
R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec.
Caution: Operation beyond the specified rating may result in damage and possible arcing and flame.
Effective September 15, 2009 onward, all 2920L PTC products will be manufactured Halogen Free (HF). Existing Non-Halogen Free 2920L PTC products will continue to be sold until
supplies are depleted. Effective January 1, 2010, all 2920L PTC product will be manufactured and sold as Halogen Free by default, and the “HF” part number suffix code will be discontinued
-- Refer to Part Ordering Number System and Packaging Options sections for additional information.
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/2920L.html for current information.
51
2920L Series
Revised: December 2, 2009
POLYFUSE® Resettable PTCs
Surface Mount > 2920L Series
Temperature Rerating
Ambient Operation Temperature
-40°C
-20°C
0°C
23°C
2920L030
0.45
0.40
0.35
0.30
2920L050
0.76
0.67
0.59
0.50
40°C
50°C
60°C
70°C
85°C
0.25
0.23
0.20
0.17
0.14
0.42
0.38
0.33
0.29
0.23
Hold Current (A)
Part Number
2920L075
1.13
1.01
0.88
0.75
0.62
0.56
0.50
0.44
0.34
2920L075/60
1.13
1.01
0.88
0.75
0.62
0.56
0.50
0.44
0.34
2920L100
1.66
1.47
1.29
1.10
0.91
0.83
0.73
0.64
0.50
2920L125
1.89
1.68
1.46
1.25
1.04
0.94
0.83
0.73
0.56
2920L150
2.27
2.01
1.76
1.50
1.25
1.13
1.00
0.87
0.74
2920L185
2.80
2.47
2.17
1.85
1.54
1.39
1.22
1.07
0.85
2920L200
3.02
2.68
2.34
2.00
1.66
1.50
1.32
1.16
0.90
2920L200/24
3.14
2.77
2.42
2.00
1.73
1.56
1.38
1.20
0.98
2920L250
3.78
3.35
2.93
2.50
2.08
1.88
1.65
1.45
1.13
2920L260
3.64
3.25
2.91
2.60
2.26
2.08
1.95
1.74
1.48
2920L300
4.53
4.02
3.51
3.00
2.52
2.26
1.99
1.75
1.34
2920L300/15
4.20
3.85
3.44
3.00
2.69
2.50
2.31
2.12
1.83
Temperature Rerating Curve
0.10A
0.30A
0.50A
0.75A & 0.75A/60
1.00A
1.25A
1.50A
1.85A
2.00A/24V
2.00A
2.50A
2.60A
3.00A/15V
3.00A
Average Time Current Curves
170%
Percentage of Rated Current
150%
2920L
100000
10000
130%
110%
90%
70%
50%
30%
10%
Time in Seconds
1000
-40
-30 -20
-10
0
10
20 30
40
Temperature (°C)
50
60
70
80 85
100
10
1
0.1
0.01
0.1
1
10
100
Current in Amperes
The average time current curves and Temperature Rerating curve performance is affected
by a number or variables, and these curves provided as guidance only. Customer must
verify the performance in their application.
52
2920L Series
Revised: December 2, 2009
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/2920L.html for current information.
POLYFUSE® Resettable PTCs
Surface Mount > 2920L Series
Soldering Parameters
Condition
Reflow
Peak Temp/ Duration Time
260°C / 10 Sec
Time above liquids (TAL) 220°C
60 Sec ~ 100 Sec
Soldering
260
Cooling
220
• Recommended reflow methods: IR, vapor phase oven, hot air
oven, N2 environment for lead–free
• Recommended maximum paste thickness is 0.25mm (0.010 inch)
• Devices can be cleaned using standard industry methods and
solvents.
Note: If reflow temperatures exceed the recommended profile,
devices may not meet the performance requirements.
Preheating
180
120
0
50 to 150
60 to 100
2920L Series
Storage Condition
50 Sec ~ 150 Sec
0°C~35°C, <
=70%RH
Temperature (°C)
Preheat 120°C~ 180°C
120
Time(s)
Physical Specifications
Environmental Specifications
Terminal Material
Solder-Plated Copper (Solder Material:
Matte Tin(Sn))
Operating/Storage
Temperature
-40°C to +85°C
Lead Solderability
Meets EIA Specification RS186-9E, ANSI/
J-STD-002 Category 3.
Maximum Device Surface
Temperature in Tripped
State
125°C
Passive Aging
+85°C, 1000 hours
-/+5% typical resistance change
Humidity Aging
+85°C, 85%,R.H.,1000 hours
-/+5% typical resistance change
Thermal Shock
MIL-STD-20 2, Method 107G
+85°C/-40°C 20 times
-30% typical resistance change
Solvent Resistance
MIL–STD–202, Method 215
Vibration
MIL–STD–883C, Method 2007.1,
Condition A
Moisture Sensitivity Level
Level 1, J–STD–020C
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/2920L.html for current information.
53
2920L Series
Revised: December 2, 2009
POLYFUSE® Resettable PTCs
Surface Mount > 2920L Series
Dimensions (mm)
MARKING CODE VARIES
WITH AMPERAGE AND VOLTAGE RATING
(SEE ELECTRICAL CHARACTERISTIC TABLE)
SHOWN ARE:
- 1.5A/33V RATING (LEFT)
- 2.0A/24V RATING (RIGHT)
C
A
Top
View
150
Bottom
View
150
D
200
-24
B
4.60 mm
(.181”)
Pad
Layout
E
Inches
5.30 mm
(.209”)
2.0mm
(.079”)
B
A
Part
Number
Side
View
mm
Inches
C
mm
Inches
D
mm
Inches
E
mm
Inches
mm
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Min
Max
Min
Max
2920L030
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L050
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L075
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L075/60 0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.05 0.06 1.20 1.80 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2
2920L100
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.02 0.04 0.55
1
0.01
0.1
0.3
2.5
0.01
0.08
0.25
2920L125
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.02 0.04 0.55
1
0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L150
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L185
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L200
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L200/24 0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L250
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L260
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.02 0.04 0.55
0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L300
0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
2920L300/15 0.26 0.31 6.73 7.98 0.19 0.21
4.8
5.44 0.03 0.05 0.75 1.25 0.01
0.1
0.3
2.5
0.01
0.08
0.25
2
54
2920L Series
Revised: December 2, 2009
1
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/2920L.html for current information.
POLYFUSE® Resettable PTCs
Surface Mount > 2920L Series
Part Ordering Number System
2920 L xxx /xx D R HF
HALOGEN-FREE
Required for some items. See Packaging section.
PACKAGING STYLE
R: Tape & Reel
SERIES
QUANTITY CODE: D=1500 M=1000 P=2000
SPECIAL VOLTAGE RATING ITEM
(Not applicable to all parts. Refer to Electrical
Characteristics Table for additional information)
I HOLD HOLD CURRENT CODE
(Refer to Electrical Characteristics Table)
Packaging
Part Number
2920L030
2920L050
2920L075
2920L075/60
2920L100
2920L125
2920L150
2920L185
2920L200
2920L200/24
2920L250
2920L260
2920L300
2920L300/15
Ordering Number
Halogen
Free
2920L030DRHF
Yes
2920L030DR
No
2920L050DRHF
Yes
2920L050DR
No
2920L075DRHF
Yes
2920L075DR
No
2920L075/60MRHF
Yes
2920L075/60MR
No
2920L100PRHF
Yes
2920L100PR
No
2920L125PRHF
Yes
2920L125PR
No
2920L150DRHF
Yes
2920L150DR
No
2920L185DRHF
Yes
2920L185DR
No
2920L200DRHF
Yes
2920L200DR
No
2920L200/24DRHF
Yes
2920L200/24DR
No
2920L250DRHF
Yes
2920L250DR
No
2920L260PRHF
Yes
2920L260PR
No
2920L300DRHF
Yes
2920L300DR
No
2920L300/15DRHF
Yes
2920L300/15DR
No
I hold
(A)
I hold
Code
0.30
Voltage
Option
Packaging
Option
Quantity
Quantity &
Packaging Codes
030
Tape and Reel
1500
DR
0.50
050
Tape and Reel
1500
DR
0.75
075
Tape and Reel
1500
DR
0.75
075
Tape and Reel
1000
MR
1.10
100
Tape and Reel
2000
PR
1.25
125
Tape and Reel
2000
PR
1.50
150
Tape and Reel
1500
DR
1.85
185
Tape and Reel
1500
DR
2.00
200
Tape and Reel
1500
DR
2.00
200
Tape and Reel
1500
DR
2.50
250
Tape and Reel
1500
DR
2.60
260
Tape and Reel
2000
PR
3.00
300
Tape and Reel
1500
DR
3.00
300
Tape and Reel
1500
DR
/60
/24
/15
* Effective September 15, 2009 onward, all 2920L PTC products will be manufactured Halogen Free (HF). Existing Non-Halogen Free 2920L PTC products will continue to be sold until
supplies are depleted. Effective January 1, 2010, all 2920L PTC product will be manufactured and sold as Halogen Free by default, and “HF” part number suffix code will be discontinued.
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/2920L.html for current information.
55
2920L Series
Revised: December 2, 2009
2920L Series
L: LITTELFUSE SURFACE MOUNT PPTC
DEVICE SIZE CODE (0.29 x 0.20 inch)
POLYFUSE® Resettable PTCs
Surface Mount > 2920L Series
Tape and Reel Specifications
TAPE SPECIFICATIONS: EIA-481-1 (mm)
2920L030,
2920L050,
2920L075
2920L100,
2920L125,
2920L260
2920L150, 2920L185,
2920L200, 2920L250,
2920L200/24,
2920L300,
2920L300/15
2920L075/60
W
16.0+/- 0.30
16.0+/- 0.30
16.0+/- 0.30
16.0+/- 0.30
H
16.0+/- 0.2
F
7.5+/- 0.05
7.5+/- 0.05
7.5+/- 0.05
7.5+/- 0.10
W
13.2+/- 1.5
E1
1.75+/- 0.10
1.75+/- 0.10
1.75+/- 0.10
1.75+/- 0.10
D
Ø 60.2+/−0.5
D0
1.55+/- 0.05
1.55+/- 0.05
1.55+/- 0.05
1.50+/- 0.10
F
Ø 13.0+/- 0.5
D1
1.5+/- 0.10
1.5+/- 0.10
1.5+/- 0.10
1.5 (min)
C
Ø 178+/- 1.0
P0
4.0+/- 0.10
4.0+/- 0.10
4.0+/- 0.10
4.0+/- 0.10
H1
11+/- 0.5
P1
8.0+/- 0.10
8.0+/- 0.10
8.0+/- 0.10
8.0+/- 0.10
W1
2.5+0.5
REEL DIMENSIONS:
EIA-481-1 (mm)
P2
2.0+/- 0.05
2.0+/- 0.05
2.0+/- 0.05
2.0+/- 0.10
W2
3.0+0.5
A0
5.45+/- 0.10
5.45+/- 0.10
5.45+/- 0.10
5.45+/- 0.10
W3
4.0+0.5
B0
7.65+/- 0.10
7.65+/- 0.10
7.65+/- 0.10
7.90+/- 0.10
T
0.25+/- 0.10
0.25+/- 0.10
0.25+/- 0.10
0.30+/- 0.05
KO
1.25+/- 0.10
1.00+/- 0.10
1.45+/- 0.10
2.00+/- 0.10
Leader min.
390
390
390
390
Trailer min.
160
160
160
160
Tape and Reel Diagram
P1
P2
D0
H
E1
P0
W2
H1
D
W1
F
C
W
W3
T
A0
D2
K0
W
B0
56
2920L Series
Revised: December 2, 2009
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/2920L.html for current information.