Extract from the online catalog MINI-PS-100-240AC/24DC/1 Order No.: 2938840 DIN rail power supply unit 24 V DC/1 A, primary switched-mode, narrow design Product notes WEEE/RoHS-compliant since: 02/28/2007 Commercial data EAN 4017918927097 Pack 1 Pcs. Customs tariff 85044081 Weight/Piece 0.2628 KG Catalog page information Page 38 (IF-2005) Technical data Input data Nominal input voltage 100 V AC ... 240 V AC AC input voltage range 85 V AC ... 264 V AC DC input voltage range 90 V DC ... 350 V DC AC frequency range 45 Hz ... 65 Hz DC frequency range 0 Hz PHOENIX CONTACT Inc., USA Page 1 / 5 MINI-PS-100-240AC/24DC/1 Order No.: 2938840 Current consumption Approx. 0.5 A (85 V AC) Approx. 0.2 A (264 V AC) Approx. 0.4 A (90 V DC) Approx. 0.1 A (for 350 V DC) Inrush surge current < 15 A (typical) Power failure bypass > 20 ms (120 V AC) > 110 ms (230 V AC) Input fuse 1.25 A (slow-blow, internal) Output data Nominal output voltage 24 V DC ±1% Setting range of the output voltage 22.5 V DC ... 28.5 V DC (> 24 V constant capacity) Output current 1 A (up to 60°C) 1.3 A (with POWER BOOST) Connection in parallel Yes, for assembling redundant systems and increasing efficiency Residual ripple < 100 mVPP Peak switching voltages nominal load < 100 mVPP (20 MHz) Maximum power dissipation idling 1W Power loss nominal load max. 4.5 W General data Width 22.5 mm Height 99 mm Depth 114.5 mm Weight 0.2 kg Operating voltage display LED green Efficiency > 80 % (for 230 V AC and nominal values) Insulation voltage input/output 3 kV (routine test) 3 kV (type test) Degree of protection IP20 Class of protection II (in an enclosed control cabinet) MTBF > 500 000 h in acc. with IEC 61709 (SN 29500) Ambient temperature (operation) -25 °C ... 70 °C (> 60°C derating) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) 95 % (at 25°C, no condensation) Mounting position On horizontal DIN rail NS 35 in acc. with EN 60715 PHOENIX CONTACT Inc., USA Page 2 / 5 MINI-PS-100-240AC/24DC/1 Order No.: 2938840 Assembly instructions Can be aligned: Vertical with spacing = 5 cm, horizontal with zero spacing Electromagnetic compatibility Conformance with EMC directive 89/336/EEC Emitted interference EN 50081-2 Immunity to interference EN 61000-6-2 Standard - Electrical safety EN 60950/VDE 0805 (SELV) Standard - Safe isolation DIN VDE 0100-410 DIN VDE 0106-1010 Connection data, input Type of connection Pluggable screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 14 Stripping length 7 mm Screw thread M3 Connection data, output Type of connection Pluggable screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 14 Stripping length 7 mm Signaling Output name Active Output description UOUT > 21.5 V: High signal Output voltage + 24 V (signal) Continuous load current Max. 20 mA Status display LED green (Uout > 21,5 V DC: LED permanently lit) PHOENIX CONTACT Inc., USA Page 3 / 5 MINI-PS-100-240AC/24DC/1 Order No.: 2938840 Certificates / Approvals Certification CUL, CUL Listed, UL, UL Listed Certification Ex: CUL-EX LIS, UL-EX LIS Drawings Block diagram Diagram POWER BOOST PHOENIX CONTACT Inc., USA Page 4 / 5