MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Description This device is designed for general purpose amplifier applications at collector currents to 300mA. Sourced from Process 73 Absolute Maximum Ratings* TA = 25°C unless otherwise specified. Parameter Symbol Value Unit Collector-Emitter Voltage VCES -80 V Collector-Base Voltage VCBO -80 V Emitter-Base Voltage VEBO -4.0 V IC -500 mA TJ, TSTG -55 to +150 °C Collector Current – Continuous Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Notes: 1. These ratings are based on a maximum junction temperature of 150°C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3. All voltages (V) and currents (A) are negative polarity for PNP transistors. Thermal Characteristics TA = 25°C unless otherwise noted. Max Characteristic Symbol MPSA56 *MMBTA56 **PZTA56 Units PD 625 5.0 350 2.8 1,000 8.0 mW mW/°C Thermal Resistance, Junction to Case RθJC 83.3 Thermal Resistance, Junction to Ambient RθJA 200 Total Device Dissipation, Derate above 25°C °C/W 357 125 °C/W *Device mounted on FR-4 PCB 1.6" x 1.6" x 0.06." **Device mounted on FR-4 PCB 36mm x 18mm x 1.5mm; mounting pad for the collector lead min. 6 cm 2. Packages MPSA56 MMBTA56 PZTA56 C C E E C B TO-92 E ©2006 Fairchild Semiconductor Corporation MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 B SOT-23 C B SOT-223 Mark: 2G 1 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier February 2006 TA = 25°C unless otherwise specified. Parameter Symbol Test Condition Min. Max. Units OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage* V(BR)CEO IC = -1.0mA, IB = 0 -80 V Collector-Base Breakdown Voltage V(BR)CBO IC = -100µA, IE = 0 -80 V Emitter-Base Breakdown Voltage V(BR)EBO IE = -100µA, IC = 0 -4.0 V Collector-Cutoff Current ICEO VCE = -60V, IB = 0 -0.1 µA Collector-Cutoff Current ICBO VCB = -80V, IE = 0 -0.1 µA hFE IC = -10mA, VCE = -1.0V IC = -100mA, VCE = -1.0V Collector-Emitter Saturation Voltage VCE(sat) IC = -100mA, IB = -10mA -0.2 V Base-Emitter On Voltage VBE(on) IC = -100mA, VCE = -1.0V -1.2 V fT IC = -100mA, VCE = -1.0V, f = 100MHz ON CHARACTERISTICS DC Current Gain 100 100 SMALL SIGNAL CHARACTERISTICS Current Gain – Bandwidth Product 50 MHz *Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 2.0% Note: All voltages (V) and currents (A) are negative polarity for PNP transistors. Spice Model PNP (Is=12.27p Xti=3 Eg=1.11 Vaf=100 Bf=91.63 Ne=1.531 Ise=12.27p Ikf=1.009 Xtb=1.5 Br=1.287 Nc=2 Isc=0 Ikr=0 Rc=.6 Cjc=48.28p Mjc=.5615 Vjc=.75 Fc=.5 Cje=106.7p Mje=.5168 Vje=.75 Tr=496.3n Tf=865.8p Itf=.2 Vtf=2 Xtf=.8 Rb=10) 2 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Electrical Characteristics MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Typical Characteristics 300 VCE = -1V 250 125°C 200 150 25°C 100 - 40°C 50 FE - h V CESAT - COLLECTOR EMITTE R VOLTAGE (V) TYP ICAL PULSED CURRE NT GAIN Typical Pulsed Current Gain vs Collector Curren -0.001 -0.01 -0.1 I C - COLLECTOR CURRENT (A) -1 -1.2 V BE( ON)- BAS E EMITTER ON VOLTAGE (V) V BESAT - BASE EM ITTE R VOLTAGE (V) Base-Emitter Saturation Voltage vs Collector Current β = 10 -1 - 40°C -0.8 25°C 125°C -0.6 -0.4 -10 -100 I C - COLLECTOR CURRE NT (mA) -1000 Collector-Emitter Saturation Voltage vs Collector Current -0.8 β = 10 -0.6 -0.4 25°C 125°C 0 -1 -100 I C - COLLECTOR CURRE NT (mA) Base Emitter ON Voltage vs Collect or Current -1.2 VCE = -1V -1 - 40°C -0.8 -0.6 25°C 125°C -0.4 -0.2 0 -0.1 -1 -10 -100 I C - COLLECTOR CURRENT (mA) -1000 Input and Output Capacitance vs Reverse Voltage Collector-Cutoff Current vs Ambient Temperature -10 f = 1.0 MHz V CB = -60V 100 CAPACITANCE (pF) I CBO - COLLECTOR CURRENT (nA) - 40°C -0.2 -1 -0.1 -0.01 C ib Cob -0.001 25 50 75 100 T A - AMBIENT TEMPERATURE (°C) 125 -0.1 3 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 -1 -10 VCE - COLLECTOR VOLTAGE (V) -100 www.fairchildsemi.com f T - GAIN BANDWIDTH PRODUCT (MHz) V CE - COLLECTOR-EMITTER VOLTAGE (V) Gain Bandwidth Product vs Collector Current Collector Saturation Region -10 TA = 25°C -8 -6 I= -1mA -100mA -10mA -4 -2 0 -3000 -5000 -10000 -20000 -30000 -50000 350 V CE = -5V 300 250 200 150 100 50 0 -1 -10 -100 IC - COLLECTOR CURRENT (mA) I B - BASE CURRENT (µA) Power Dissipation vs Ambient Temperature P D - POWER DISSIPATION (W) 1 SOT-223 0.75 TO-92 0.5 SOT-23 0.25 0 0 25 50 75 100 TEMPERATURE ( oC) 4 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 125 150 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Typical Characteristics (Continued) TO-92 Packaging Configuration: Figure 1.0 TAPE and REEL OPTION FSCINT Label sample FAIRCHILD SEMICONDUCTOR CORPORATION LOT: CBVK741B019 PN2222N NSID: D/C1: QTY: See Fig 2.0 for various Reeling Styles HTB:B 10000 SPEC: D9842 SPEC REV: FSCINT Label B2 QA REV: 5 Reels per Intermediate Box (FSCINT) Customized Label F63TNR Label sample LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2: F63TNR Label QTY: 2000 SPEC: QTY1: QTY2: SPEC REV: CPN: N/F: F Customized Label (F63TNR)3 375mm x 267mm x 375mm Intermediate Box TO-92 TNR/AMMO PACKING INFROMATION Packing Style Quantity EOL code Reel A 2,000 D26Z E 2,000 D27Z Ammo M 2,000 D74Z P 2,000 D75Z AMMO PACK OPTION See Fig 3.0 for 2 Ammo Pack Options FSCINT Label Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units 5 Ammo boxes per Intermediate Box 327mm x 158mm x 135mm Immediate Box Customized Label (TO-92) BULK PACKING INFORMATION EOL CODE DESCRIPTION QUANTITY TO-18 OPTION STD NO LEAD CLIP 2.0 K / BOX J05Z TO-5 OPTION STD NO LEAD CLIP 1.5 K / BOX NO LEADCLIP 2.0 K / BOX NO LEADCLIP 2.0 K / BOX TO-92 STANDARD STRAIGHT FOR: PKG 92, 94 (NON PROELECTRON SERIES), 96 L34Z TO-92 STANDARD STRAIGHT FOR: PKG 94 (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98 333mm x 231mm x 183mm Intermediate Box BULK OPTION LEADCLIP DIMENSION J18Z NO EOL CODE Customized Label F63TNR Label See Bulk Packing Information table Anti-static Bubble Sheets FSCINT Label 2000 units per EO70 box for std option 114mm x 102mm x 51mm Immediate Box 5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box Customized Label FSCINT Label 10,000 units maximum per intermediate box for std option 5 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TO-92 Tape and Reel Data TO-92 Reeling Style Configuration: Figure 2.0 Machine Option “A” (H) Machine Option “E” (J) Style “A”, D26Z, D70Z (s/h) Style “E”, D27Z, D71Z (s/h) TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP ORDER STYLE D74Z (M) ORDER STYLE D75Z (P) FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM 6 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TO-92 Tape and Reel Data (Continued) TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0 Hd P Pd b Ha W1 d L H1 HO L1 S WO t W2 W t1 P1 F1 DO P2 PO User Direction of Feed TO-92 Reel Configuration: Figure 5.0 ITEM DESCRIPTION SYMBOL DIMENSION Base of Package to Lead Bend b 0.098 (max) Component Height Ha 0.928 (+/- 0.025) Lead Clinch Height HO 0.630 (+/- 0.020) Component Base Height H1 0.748 (+/- 0.020) Component Alignment ( side/side ) Pd 0.040 (max) Component Alignment ( front/back ) Hd 0.031 (max) Component Pitch P 0.500 (+/- 0.020) Feed Hole Pitch PO 0.500 (+/- 0.008) Hole Center to First Lead P1 0.150 (+0.009, -0.010) Hole Center to Component Center P2 0.247 (+/- 0.007) Lead Spread F1/F2 0.104 (+/- 0 .010) Lead Thickness d 0.018 (+0.002, -0.003) Cut Lead Length L 0.429 (max) Taped Lead Length L1 0.209 (+0.051, -0.052) Taped Lead Thickness t 0.032 (+/- 0.006) Carrier Tape Thickness t1 0.021 (+/- 0.006) Carrier Tape Width W 0.708 (+0.020, -0.019) Hold - down Tape Width WO 0.236 (+/- 0.012) Hold - down Tape position W1 0.035 (max) Feed Hole Position W2 0.360 (+/- 0.025) Sprocket Hole Diameter DO 0.157 (+0.008, -0.007) Lead Spring Out S 0.004 (max) Note : All dimensions are in inches. ELECT ROSTATIC SEN SITIVE D EVICES D4 D1 D2 F63TNR Label ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM Reel Diameter D1 13.975 14.025 Arbor Hole Diameter (Standard) D2 1.160 1.200 D2 0.650 0.700 Customized Label (Small Hole) W1 Core Diameter D3 3.100 3.300 Hub Recess Inner Diameter D4 2.700 3.100 Hub Recess Depth W1 0.370 0.570 Flange to Flange Inner Width W2 1.630 Hub to Hub Center Width W3 1.690 2.090 W3 W2 Note: All dimensions are inches D3 7 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TO-92 Tape and Reel Data (Continued) MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TO-92 Package Dimensions TO-92 (FS PKG Code 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.1977 8 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com SOT-23 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. Antistatic Cover Tape Human Readable Label These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchil d logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped. Embossed Carrier Tape 3P 3P 3P 3P SOT-23 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Standard (no flow code) TNR 3,000 D87Z 7" Dia 13" 187x107x183 343x343x64 Max qty per Box 24,000 30,000 Weight per unit (gm) 0.0082 0.0082 Weight per Reel (kg) 0.1175 0.4006 Reel Size Box Dimension (mm) SOT-23 Unit Orientation TNR 10,000 343mm x 342mm x 64mm Intermediate box for L87Z Option Human Readable Label Note/Comments Human Readable Label sample H uman readable Label 187mm x 107mm x 183mm Intermediate Box for Standard Option SOT-23 Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Trailer Tape 300mm minimum or 75 empt y poc kets Components 9 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 Leader Tape 500mm minimum or 125 empty pockets www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-23 Tape and Reel Data SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 P0 P2 D0 D1 T E1 W F E2 Wc B0 Tc A0 P1 K0 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 SOT-23 (8mm) 3.15 +/-0.10 2.77 +/-0.10 W 8.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 F 6.25 min 3.50 +/-0.05 P1 P0 4.0 +/-0.1 4.0 +/-0.1 K0 T 1.30 +/-0.10 0.228 +/-0.013 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). Wc 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 5.2 +/-0.3 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SOT-23 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 2.165 55 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 – 0.429 7.9 – 10.9 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 – 0.429 7.9 – 10.9 8mm 7" Dia 7.00 177.8 8mm 13" Dia 13.00 330 Dim C Dim D Dim N 10 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 Dim W1 Dim W2 Dim W3 (LSL-USL) www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-23 Tape and Reel Data (Continued) SOT-23 (FS PKG Code 49) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 11 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-23 Package Dimensions MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-223 Tape and Reel Data SOT-223 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: F63TNR Label Antistatic Cover Tape SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. Static Dissipative Embossed Carrier Tape F852 014 F852 014 F852 014 F852 014 SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Standard (no flow code) TNR D84Z SOT-223 Unit Orientation TNR 2,500 500 13" Dia 7" Dia 343x64x343 184x187x47 Max qty per Box 5,000 1,000 Weight per unit (gm) 0.1246 0.1246 Weight per Reel (kg) 0.7250 0.1532 343mm x 342mm x 64mm Intermediate box for Standard F63TNR Label Note/Comments F63TNR Label F63TNR Label sample 184mm x 184mm x 47mm Pizza Box for D84Z Option SOT-223 Tape Leader and Trailer Configuration: Figure 2.0 LOT: CBVK741B019 QTY: 3000 FSID: PN2222A SPEC: D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F (F63TNR)3 Carrier Tape Cover Tape Trailer Tape 300mm minimum or 38 empty pockets Components 12 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 Leader Tape 500mm minimum or 62 empty pockets www.fairchildsemi.com SOT-223 Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc E2 B0 W Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type SOT-223 (12mm) A0 6.83 +/-0.10 B0 7.42 +/-0.10 W 12.0 +/-0.3 D0 D1 1.55 +/-0.05 1.50 +/-0.10 E1 E2 1.75 +/-0.10 F 10.25 min P1 5.50 +/-0.05 P0 8.0 +/-0.1 4.0 +/-0.1 K0 1.88 +/-0.10 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). T Wc 0.292 +/0.0130 9.5 +/-0.025 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SOT-223 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 5.906 150 0.488 +0.078/-0.000 12.4 +2/0 0.724 18.4 0.469 – 0.606 11.9 – 15.4 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 7.00 178 0.488 +0.078/-0.000 12.4 +2/0 0.724 18.4 0.469 – 0.606 11.9 – 15.4 12mm 7" Dia 7.00 177.8 12mm 13" Dia 13.00 330 Dim C Dim D Dim N 13 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 Dim W1 Dim W2 Dim W3 (LSL-USL) www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-223 Tape and Reel Data (Continued) SOT-223 (FS PKG Code 47) 1:1 Scale 1:1 on letter size paper Part Weight per unit (gram): 0.1246 14 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-223 Package Dimensions The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ 2 E CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I18 15 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TRADEMARKS