Document 383-1 Shielded Power Inductors – MSS7341 • 6.6 × 6.6 mm footprint; 4.1 mm high shielded inductors • Low DCR and excellent current handling Designer’s Kit C385 contains 3 each of all values. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant matte tin over nickel over phos bronze (current production) or gold over nickel over phos bronze (prior production). Other terminations available at additional cost. Weight: 0.61 – 0.67 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1200/13″ reel; Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 4.5 mm pocket depth PCB washing Only pure water or alcohol recommended Part number1 Inductance2 (µH) DCRSRF Isat (A) Irms (A) (Ohms) typ3 10%20%30% 20°C 40°C typ max (MHz) drop drop drop rise rise 4 5 MSS7341-332NL_ 3.3 ±30% 0.014 0.018 85 2.74 3.28 3.72 3.95 5.00 MSS7341-502NL_ 5.0 ±30% 0.018 0.023 49 2.30 2.82 3.16 3.40 4.70 MSS7341-622NL_ 6.2 ±30% 0.024 0.027 42 2.18 2.66 2.98 3.05 4.30 MSS7341-742NL_ 7.4 ±30% 0.027 0.031 35 1.92 2.32 2.56 2.80 4.10 MSS7341-872NL_ 8.7 ±30% 0.029 0.034 33 1.78 2.12 2.36 2.80 3.90 MSS7341-103ML_ 10 ±20% 0.0320.03832 1.641.922.102.803.80 MSS7341-123ML_ 12 ±20% 0.0400.05027 1.481.761.922.453.30 MSS7341-153ML_ 15 ±20% 0.0470.05526 1.361.601.782.053.00 MSS7341-183ML_ 18 ±20% 0.0650.07525 1.201.461.621.852.65 MSS7341-223ML_ 22 ±20% 0.0740.08222 1.021.261.421.702.35 MSS7341-273ML_ 27 ±20% 0.0910.10919 1.001.141.221.502.10 MSS7341-333ML_ 33 ±20% 0.1040.12417 0.911.041.161.501.95 MSS7341-393ML_ 39 ±20% 0.1150.13015 0.851.011.121.501.90 MSS7341-473ML_ 47 ±20% 0.1270.15514 0.740.921.001.501.85 MSS7341-563ML_ 56 ±20% 0.1740.20211 0.680.800.871.251.60 MSS7341-683ML_ 68 ±20% 0.2360.250 9.60.620.730.801.001.35 MSS7341-823ML_ 82 ±20% 0.2570.290 8.50.570.660.721.001.25 MSS7341-104ML_100 ±20% 0.2860.310 7.20.540.640.710.901.15 MSS7341-224ML_220 ±20% 0.6600.710 5.00.350.410.470.570.78 MSS7341-474ML_470 ±20% 1.21 1.45 3.00.240.280.320.430.57 MSS7341-684KL_680 ±10% 1.85 1.98 2.50.220.270.290.420.56 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 1.Specify termination and packaging codes: MSS7341-224MLD Termination:L=RoHS compliant matte tin over nickel over phos bronze (current production) or gold over nickel over phos bronze (prior production) Special order: T = RoHS tin-silver-copper (95.5/4/0.5) over gold over nickel over phos bronze or S = non-RoHS tin-lead (63/37) over gold over nickel over phos bronze. Packaging:D =13″ machine-ready reel. EIA‑481 embossed plastic tape (1200 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD‑A fixture in an Agilent/HP 4263B LCR meter. 3. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD‑D test fixture. 4. DC current at which the inductance drops the specified amount from its value without current. 5. Current that causes the specified temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 383-1 Revised 11/04/11 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 383-2 Shielded Power Inductors – MSS7341 Typical L vs Current 1000 Typical L vs Frequency 1000 680 µH 680 µH 220 µH 100 µH 100 Inductance (µH) Inductance (µH) 220 µH 33 µH 10 µH 10 100 µH 100 33 µH 10 µH 10 3.3 µH 1 0.01 3.3 µH 1 0.1 10 1 0.01 0.287 * 7,3 10 µH 33 µ H 3.3 µ H 0.287* 7,3 100 µH Temperature rise (from 25°C) 50 123 X Internal code Parts manufactured prior to Sept. 2007 were marked with only the dash number. * Dimensions are of the case not including the termination. For maximum overall dimensions including the termination, add 0.02 in / 0,51 mm. 0.161 max 4,1 20 10 0.083 typ 2,1 0 1.0 2.0 3.0 4.0 5.0 0.260 typ 6,6 0.280 7,1 0.099 2,5 0.280 7,1 0.260 typ 6,6 6.0 Current (A rms) 0.222 ∅ 5,65 Irms Derating 120 110 Dimensions are in 100 inches mm Recommended Land Pattern 90 80 70 60 50 40 25°C Percent of rated Irms Dash number 30 0 10 Frequency (MHz) Typical Temperature Rise vs Current 40 1 0.1 Current (A) 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 383-2 Revised 11/04/11 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.