INDEX MX23C1010 1M-BIT MASK ROM (8 BIT OUTPUT) FEATURES ORDER INFORMATION • Bit organization - 128K x 8 (byte mode) • Fast access time - Random access: 45ns (max.) • Current - Operating: 40mA - Standby: 100uA • Supply voltage - 5V±10% for 70ns(max.) - 5V±5% for 45ns(max.) • Package - 32 pin PDIP/SOP/PLCC/TSOP Part No. Access Time MX23C1010PC-45 45ns MX23C1010PC-70 70ns MX23C1010PC-90 90ns MX23C1010PC-10 100ns MX23C1010PC-12 120ns MX23C1010PC-15 150ns MX23C1010MC-45 45ns MX23C1010MC-70 70ns MX23C1010MC-90 90ns MX23C1010MC-10 100ns MX23C1010MC-12 120ns MX23C1010MC-15 150ns MX23C1010QC-45 45ns MX23C1010QC-70 70ns MX23C1010QC-90 90ns MX23C1010QC-10 100ns MX23C1010QC-12 120ns MX23C1010QC-15 150ns MX23C1010TC-45 45ns MX23C1010TC-70 70ns MX23C1010TC-90 90ns MX23C1010TC-10 100ns MX23C1010TC-12 120ns MX23C1010TC-15 150ns MX23C1010QI-12(*) 120ns MX23C1010QI-15(*) 150ns MX23C1010TI-90(*) 90ns (*): industrial grade, TA= -40° C ~ 85° C PIN CONFIGURATION 32 PDIP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 MX23C1010 NC A16 A15 A12 A7 A6 A5 A4 A3 A2 A1 A0 D0 D1 D2 VSS 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 VCC NC NC A14 A13 A8 A9 A11 OE A10 CE D7 D6 D5 D4 D3 NC A16 A15 A12 A7 A6 A5 A4 A3 A2 A1 A0 D0 D1 D2 VSS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 MX231010 32 SOP 32 31 30 29 28 27 26 25 24 23 22 21 10 19 18 17 VCC NC NC A14 A13 A8 A9 A11 OE A10 CE D7 D6 D5 D4 D3 Package 32 pin PDIP 32 pin PDIP 32 pin PDIP 32 pin PDIP 32 pin PDIP 32 pin PDIP 32 pin SOP 32 pin SOP 32 pin SOP 32 pin SOP 32 pin SOP 32 pin SOP 32 pin PLCC 32 pin PLCC 32 pin PLCC 32 pin PLCC 32 pin PLCC 32 pin PLCC 32 pin TSOP 32 pin TSOP 32 pin TSOP 32 pin TSOP 32 pin TSOP 32 pin TSOP 32 pin PLCC 32 pin PLCC 32 pin TSOP PIN DESCRIPTION Symbol A0~A16 D0~D7 CE OE VCC VSS NC P/N:PM0227 Pin Function Address Inputs Data Outputs Chip Enable Input Output Enable Input Power Supply Pin Ground Pin No Connection REV. 4.0, DEC. 10, 1998 1 INDEX MX23C1010 A7 32 NC 1 NC VCC A16 4 NC 5 30 29 A14 A6 A13 A5 A8 A9 A4 A3 9 MX23C1010 25 A11 A2 OE A1 A10 CE A0 21 20 D5 17 D7 D6 13 14 D4 D0 D3 MX23C1010 OE A10 CE D7 D6 D5 D4 D3 VSS D2 D1 D0 A0 A1 A2 A3 VSS 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 D2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 D1 A11 A9 A8 A13 A14 NC NC VCC NC A16 A15 A12 A7 A6 A5 A4 A15 32 PLCC A12 32 TSOP(I) ABSOLUTE MAXIMUM RATINGS ITEM Voltage on any Pin Relative to VSS Ambient Operating Temperature Storage Temperature SYMBOL VIN Topr Tstg RATINGS -0.5V to 7.0V -40°C to 85°C -65°C to 125°C DC CHARACTERISTICS (Ta = -40°C ~ 85°C, VCC = 5V±10% for 70ns max., 5V±5% for 45ns max.) ITEM Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Input Leakage Current Output Leakage Current Operating Current Standby Current (TTL) Standby Current (CMOS) Input Capacitance Output Capacitance SYMBOL VOH VOL VIH VIL ILI ILO ICC1 ISTB1 ISTB2 CIN COUT MIN. 2.4V 2.0V -0.3V -10 -10 - P/N:PM0227 MAX. 0.4V VCC+0.5V 0.8V 10uA 10uA 40mA 1.5mA 100uA 12pF 12pF CONDITIONS IOH = -0.4mA IOL = 2.1mA VIN=0 to 5.5V VOUT=0 to 5.5V CE = VIL, f = 5MHz, Iout = 0mA CE = VIH CE = VCC +/- 0.3V VIN=0V VOUT=OV REV. 4.0, DEC. 10, 1998 2 INDEX MX23C1010 AC CHARACTERISTICS (Ta = -40°C ~ 85°C, VCC = 5V±10% for 70ns max., 5V±5% for 45ns max.) ITEM SYMBOL Read Cycle Time tRC 23C1010-45* 23C1010-70* 23C1010-90 23C1010-10 23C1010-12 23C1010-15 MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN MAX MIN MAX 45ns - 70ns - 90ns - 100ns - 120ns - 150ns - Address Access Time tAA - 45ns - 70ns - 90ns - 100ns - 120ns - 150ns Chip Enable Access Time tACE - 45ns - 70ns - 90ns - 100ns - 120ns - 150ns Output Enable Time tOE - 25ns - 35ns - 40ns - 45ns - 50ns - 60ns Output Hold After Address tOH 0ns - 0ns - 0ns - 0ns - 0ns - 0ns - Output High Z Delay - 17ns - 20ns - 25ns - 30ns - 35ns - 50ns tHZ Note :Output high-impedance delay (tHZ) is measured from OE or CE going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested. *45ns&70ns speed grades are under development. AC Test Conditions Input Pulse Levels Input Rise and Fall Times Input Timing Level Output Timing Level Output Load 0.4V~2.4V 0V~3v (for 45ns&70ns) 10ns 0.8V~2.0V 1.5V (for 45ns&70ns) 0.8V and 2.0V 1.5V (for 45ns&70ns) See Figure DEVICE UNDER TEST 1.8K ohm +5V CL=100pF* 6.2K ohm DIODES = IN3064 OR EQUIVALENT *CL=30pF for 45ns&70ns TIMING DIAGRAM RANDOM READ ADD ADD ADD ADD tRC tACE CE OE tOE tAA DATA tOH VALLID VALLID tHZ VALLID Note : CE, OE are enable. P/N:PM0227 REV. 4.0, DEC. 10, 1998 3 INDEX MX23C1010 PACKAGE INFORMATION 32-PIN PLASTIC DIP (600 mil) ITEM MILLIMETERS INCHES A 42.13 max. 1.660 max. B 1.90 [REF] .075 [REF] C 2.54 [TP] .100 [TP] D .46 [Typ.] .018 [Typ.] E 38.07 1.500 F 1.27 [Typ.] .050 [Typ.] G 3.30±.25 .130±.010 H .51 [REF] .020 [REF] I 3.94±.25 .155±.010 J 5.33 max. .210 max. K 15.22±.25 .600±.010 L 13.97±.25 .550±.010 M .25 [Typ.] .010 [Typ.] 32 17 1 16 A K L F D C NOTE: Each lead centerline is located within .25 mm[.01 inch] of its true position [TP] at maximum material condition. I J H G 0~15 M B E 32-PIN PLASTIC SOP (450 mil) ITEM MILLIMETERS INCHES A 20.95 max. .825 max. B 1.00 [REF] .039 [REF] C 1.27 [TP] .050 [TP] D .40 [Typ.] .016 [Typ.] E .05 min. .002 min. F 3.05 max. .120 max. G 2.69±.13 .106±.005 H 14.12±.25 .556±.010 I 11.30±.13 .445±.005 J 1.42 .056 K .20 [Typ.] .008 [Typ.] L .79 .031 NOTE: Each lead centerline is located within .25 mm[.01 inch] of its true position [TP] at maximum material condition. 32 17 1 16 H A I G J F K E D C P/N:PM0227 B L REV. 4.0, DEC. 10, 1998 4 INDEX MX23C1010 32-PIN PLASTIC TSOP ITEM MILLIMETERS INCHES A 20.0±.20 .078±.006 B 18.40±.10 .724±.004 C 8.20 max. .323 max. D .15 [Typ.] .006 [Typ.] E .80 [Typ.] .031 [Typ.] F .20±.10 .008±.004 G .30±.10 .012±.004 H .50 [Typ.] .020 [Typ.] I .45 max. .018 max. A B C J 0 ~ .20 0 ~ .008 K 1.00±.10 .039±.004 L 1.27 max. .050 max. M .50 .020 N 0 ~ 5° .500 N M K L D E F I H G J NOTE: Each lead centerline is located within .25 mm[.01 inch] of its true position [TP] at maximum material condition. 32-PIN PLASTIC LEADED CHIP CHARRIER (PLCC) A ITEM MILLIMETERS INCHES A 12.44±.13 .490±.005 B 11.50±.13 .453±.005 C 14.04±.13 .553±.13 D 14.98±.13 .590±.13 E 1.93 .076 F 3.30±.25 .130±.010 G 2.03±.13 .080±.005 H .51±.13 .020±.005 I 1.27 [Typ.] .050 [Typ.] J .71 [REF] .028 [REF] K .46 [REF] .018 [REF] L 10.40/12.94 .410/.510 (W) (W) (L) B 1 4 .89 R .035 R N .25 [TYP.] .010 [TYP.] 30 5 29 9 25 13 C D 21 14 20 17 (L) M 32 E F NOTE: Each lead centerline is located within .25 mm[.01 inch] of its true position [TP] at maximum material condition. G N H M I J K L P/N:PM0227 REV. 4.0, DEC. 10, 1998 5 INDEX MX23C1010 REVISION HISTORY REVISION DESCRIPTION PAGE DATE 3.9 4.0 To add 70ns speed grade To add 45ns speed grade P2 P2 NOV/23/1998 DEC/10/1998 P/N:PM0227 REV. 4.0, DEC. 10, 1998 6 INDEX MX23C1010 MACRONIX INTERNATIONAL CO., LTD. HEADQUARTERS: TEL:+886-3-578-8888 FAX:+886-3-578-8887 EUROPE OFFICE: TEL:+32-2-456-8020 FAX:+32-2-456-8021 JAPAN OFFICE: TEL:+81-44-246-9100 FAX:+81-44-246-9105 SINGAPORE OFFICE: TEL:+65-747-2309 FAX:+65-748-4090 TAIPEI OFFICE: TEL:+886-3-509-3300 FAX:+886-3-509-2200 MACRONIX AMERICA, INC. TEL:+1-408-453-8088 FAX:+1-408-453-8488 CHICAGO OFFICE: TEL:+1-847-963-1900 FAX:+1-847-963-1909 http : //www.macronix.com MACRONIX INTERNATIONAL CO., LTD. reserves the rignt to change product and specifications without notice. 7