Surface Mount Aluminum Electrolytic Capacitors NACVF Series FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNT • HIGH VOLTAGE (160VDC AND 450VDC) • 10mm x 14mm ~ 18mm x 22mm CASE SIZES includes all homogeneous materials • LONG LIFE (5000 HOURS AT +105OC) *See Part Number System for Details • DESIGNED FOR REFLOW SOLDERING RoHS Compliant CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 Minutes 160Vdc Max. Tan δ at 120Hz & 20°C Low Temperature Stability (Impedance Ratio @ 120Hz) Z -25°C/+20°C 160 ~ 450Vdc 2.2 ~ 100µF -40°C ~ +105°C ±20% (M) 0.06CV + 10µA 250Vdc 350Vdc 0.20 200Vdc 0.15 2 2 3 400Vdc 5 6 Load Life @ 105°C & Rated Voltage Capacitance Change 10x14mm 3,000 hours Tan δ 10x18mm 4,000 hours 12.5 ~ 18mm Dia 5,000 hours Leakage Current Less than the specificed maximum value Capacitance Change Tan δ Leakage Current Within ±10% of initial measured value Less than the specificed maximum value Less than the specificed maximum value Resistance to Soldering Heat Within the Recommended Reflow Conditions MAXIMUM RIPPLE CURRENT (mA rms AT 100KHz AND 105°C) ��� �µ�� ��� ��� � ��� � � �� Within ±20% of initial measured value Less than 200% of specificed value �� ��� �µ�� ��� �� ��� ��� � �� ��� � ������� ������� ����� ��� ��� ��� ��� � � � � � � ��� ��� ��� ��� ��� ��� � � � �� �� �� ��� � � � ���� ���� ���� �� �� �� �� ��� ��� ��� �� ���� ���� ���� ���� ���� �� � ��� ��� ��� ��� ��� �� ���� � ���� ���� ���� ���� ���� �� ��� ��� ��� ��� ��� � �� ���� ���� ���� ���� ���� � �� ��� ��� ��� ��� � � �� ���� ���� ���� � � � � � � �� ��� ��� ���� ���� ��� 6 MAXIMUM ESR (Ω AT 120Hz AND 20°C) ������� ������� ����� ��� ��� ��� ��� � � � � � 450Vdc 0.24 ��� � � � � � � � �� ���� ���� ���� ���� � ��� ���� ���� � � RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Frequecy (Hz) Voltage (Vdc) 120 1K 10K ~ 30K 31K ~ 100K 160V ~ 250V 0.55 0.85 0.90 1.00 350V ~ 450V 0.50 080 0.90 1.00 PRECAUTIONS ® NIC COMPONENTS CORP. Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 17 Surface Mount Aluminum Electrolytic Capacitors NACVF Series STANDARD PRODUCT AND CASE SIZE TABLE DφxL (mm) ��� �µ�� ���� Dφ ������� ������� ����� ��� ��� ��� � ��� ��� � � ��� �� �� �� ��� ��� ��� ��� � � � � �� � �� � ���� � �� �� � �� ���� � �� �� � �� �� � �� �� � �� �� � �� �� � �� �� � �� �� � �� �� � �� �� ��� �� � �� �� � �� �� � �� �� � �� �� � �� �� � �� �� � �� �� � �� � �� ��� �� � �� �� � �� � � � ��� ��� �� � �� � � � � �� � �� �� � �� �� � �� ��� � ��� � ��� � ��� � ��� �� � �� �� � �� �� � �� ���� � �� �� � �� �� � �� � �� � �� + � Dφ ±0.5 10.0 10.0 12.5 16.0 18.0 18.0 I I - W A DIMENSIONS (mm) Case Size 10 x 14 10 x 18 12.5 x 17T2 16 x 17T2 18 x 17T2 18 x 22T2 L 0.3mm max. P L max. 14.0 18.5 17.5 17.5 17.5 22.5 A ±0.2 10.3 10.3 13.5 17.0 19.0 19.0 B ±0.2 10.3 10.3 13.5 17.0 19.0 19.0 I ±0.2 3.5 3.5 4.7 5.5 6.5 6.5 W 0.7 ~ 1.4 1.1 ~ 1.4 0.6 ~ 1.2 0.9 ~ 1.5 0.9 ~ 1.5 0.9 ~ 1.5 P ±0.2 4.6 4.6 4.4 6.7 6.7 6.7 B PART NUMBER SYSTEM NACVF 330 M 200V 16x17 TR 13 T2 F RoHS Compliant Terminal Style T2 = 2 Terminal T4 = 4 Terminal (Discontinued) Series 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF ® 18 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com