NC500SM SURFACE MOUNT NOISE SOURCE SERIES 200 KHZ TO 3.5 GHZ The NC500SM Noise Source series is an economical solution for built-in test applications. These small surface mount modules are self-contained with all the bias circuits, eliminating the need for external components. Insensitive to temperature variations, these modules produce extremely flat output power versus frequency characteristics. The modules typically require <10 mA and produce a minimum of 31 dB ENR of white Gaussian noise. GENERAL SPECIFICATIONS NC504SM TYPICAL DATA • Frequency: 200 kHz to 3.5 GHz • Crest Factor: 5:1 • Temperature Coefficient: 0.015 dB/C° • Supply Sensitivity: 0.2 dB / %V • Operating Temperature: 0°C to +70°C • Storage Temperature -65°C to +125°C TYPICAL APPLICATIONS AVAILABLE MODELS Frequency OUTPUT I (max) ENR (dB) Ohms FLATNESS (dB) (mA) NC501SM-12 NC501SM-15 NC501SM-28 200 kHz - 500 MHz 31 50 2 10 Typical applications for Micronetics NC500SM Noise Source Series include: NC502SM-12 NC502SM-15 NC502SM-28 200 kHz - 1 GHz 31 50 2 10 • Built-in test equipment (BITE) NC503SM-12 NC503SM-15 NC503SM-28 200 kHz - 2 GHz 31 50 2 10 NC504SM-12 NC504SM-15 NC504SM-28 200 kHz - 3.5 GHz 31 50 2 10 Model +12V Model +15V Model +28V Range MINUMUM OUTPUT Notes: place EVAL at the end of the model number to order a connectorized evaluation board • Test signal strength in PCS, CATV • Calibrators • Radar warning receivers • Spectrum analyzers • Dithering A/D quantization error • Gain-bandwidth product testing MICRONETICS, HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 / EMAIL: [email protected] / WWW.MICRONETICS.COM