NCP584 Tri−Mode 200 mA CMOS LDO Regulator with Enable The NCP584 series of low drop out regulators are designed for portable battery powered applications which require precise output voltage accuracy, low supply current, and high ripple rejection. These devices feature an enable function which lowers current consumption significantly and are offered in the SOT23−5 package. This series of devices have three modes. Chip Enable (CE mode), Fast Transient Mode (FT mode), and Low Power Mode (LP mode). Both the FT and LP mode are utilized via the ECO pin. http://onsemi.com MARKING DIAGRAM 5 Features • Low Dropout Voltage of 300 mV at 200 mA, Output Voltage = 1.0 V • • • • • • • 200 mV at 200 mA, Output Voltage = 1.5 V 140 mV at 200 mA, Output Voltage = 3.0 V Excellent Line and Load Regulation High Output Voltage Accuracy of ±2% (±3% LP mode) Ultra−Low Supply Current of: 3.5 mA (LP mode, Output Voltage ≤ 1.5 V) 40 mA (FT mode) Excellent Power Supply Rejection Ratio Low Temperature Drift Coefficient on the Output Voltage Low Quiescent Current of 0.1 mA This is a Pb−Free Device* SOT23−5 SN SUFFIX CASE 1212 1 DEV M 5 DEVM 1 = Device Code = Date Code ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 11 of this data sheet. Typical Applications • Portable Equipment • Hand−Held Instrumentation • Camcorders and Cameras ECO Vin ECO Vout Vin Vout − + − + Vref Vref Current Limit CE Current Limit GND CE Figure 1. Simplified Block Diagram for Active Low GND Figure 2. Simplified Block Diagram for Active High *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2005 July, 2005 − Rev. 2 1 Publication Order Number: NCP584/D NCP584 PIN FUNCTION DESCRIPTION SOT23−5 Pin Name Description 1 Vin 2 GND 3 CE or CE 4 ECO Mode alternative pin. 5 Vout Regulated output voltage. Power supply input voltage. Power supply ground. Chip enable pin. MAXIMUM RATINGS Rating Symbol Value Unit Vin 6.5 V Input Voltage Input Voltage (CE or CE Pin) VCE −0.3 to Vin +0.3 V VECO −0.3 to Vin +0.3 V Output Voltage Vout −0.3 to Vin +0.3 V Output Current Iout 250 mA Power Dissipation PD 250 mW Operating Junction Temperature Range TJ −40 to +85 °C Tstg +150 °C Input Voltage (ECO Pin) Storage Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. ELECTRICAL CHARACTERISTICS (Vin = Vout + 1.0 V, TA = 25°C, unless otherwise noted.) Symbol Min Typ Max Unit Input Voltage Vin 1.4 − 6.0 V Output Voltage (1.0 mA ≤ Iout ≤ 30 mA) VECO = Vin VECO = GND Vout Vout X 0.980 Vout X 0.970 − − Vout X 1.020 Vout X 1.030 − − 0.05 0.10 0.20 0.30 − − 20 10 40 40 − − 0.40 0.30 0.20 0.10 0.70 0.50 0.30 0.20 − 40 70 − − 3.5 4.5 6.0 8.0 200 − − Characteristic Line Regulation (Iout = 30 mA, Vout + 0.5 V ≤ Vin ≤ 6.0 V) FT Mode VECO = Vin LP Mode VECO = GND Regline Load Regulation FT Mode (1.0 mA ≤ Iout ≤ 200 mA), VECO = Vin LP Mode (1.0 mA ≤ Iout ≤ 100 mA), VECO = GND Regload Dropout Voltage (Iout = 200 mA) 0.8 ≤ Vout ≤ 0.9 V 1.0 ≤ Vout ≤ 1.4 V 1.5 ≤ Vout ≤ 2.5 V 2.6 ≤ Vout ≤ 3.1 V V %/V mV VDO V Power Supply Current (Iout = 0 mA) FT Mode, VECO = Vin LP Mode, VECO = GND Vout ≤ 1.5 V Vout ≤ 1.6 V Isupply Output Current (Vin − Vout = 0.5 V) Vin ≥ 1.5 V, Vout ≤ 1.0 V Iout Quiescent Current (VCE = Vin) IQ − 0.1 1.0 mA Output Short Circuit Current (Vout = 0 V) Ilim − 50 − mA Vthenh Vthenl 1.0 0 − − Vin 0.3 Enable Input Threshold Voltage High, ECO Input Voltage = High Low, ECO Input Voltage = Low mA mA V http://onsemi.com 2 NCP584 0.9 0.9 0.8 0.8 OUTPUT VOLTAGE Vout (V) OUTPUT VOLTAGE Vout (V) TYPICAL CHARACTERISTICS 0.7 0.6 Vin = 2.8 V 0.5 0.4 0.3 1.4 V 0.2 Vout = 0.8 V ECO = H 0.1 0.6 Vin = 2.8 V 0.5 0.4 0.3 1.4 V 0.2 Vout = 0.8 V ECO = L 0.1 0.0 0.0 0 100 200 300 400 0 300 400 OUTPUT CURRENT Iout (mA) Figure 3. Output Voltage vs. Output Current Figure 4. Output Voltage vs. Output Current 1.6 1.6 1.4 1.4 1.2 Vin = 3.5 V 1.0 0.8 1.8 V 0.6 0.4 Vout = 1.5 V ECO = H 0.2 1.2 Vin = 3.5 V 1.0 0.8 1.8 V 0.6 0.4 Vout = 1.5 V ECO = L 0.2 0 0 0 100 200 300 400 0 100 OUTPUT CURRENT Iout (mA) 0.9 0.9 OUTPUT VOLTAGE Vout (V) 1.0 0.8 0.7 0.6 0.5 Iout = 1.0 mA Iout = 30 mA 0.3 Iout = 50 mA 0.2 Vout = 0.8 V ECO = H 0.1 0.0 0.0 1.0 2.0 3.0 4.0 400 300 Figure 6. Output Voltage vs. Output Current 1.0 0.4 200 OUTPUT CURRENT Iout (mA) Figure 5. Output Voltage vs. Output Current OUTPUT VOLTAGE Vout (V) 200 100 OUTPUT CURRENT Iout (mA) OUTPUT VOLTAGE Vout (V) OUTPUT VOLTAGE Vout (V) 0.7 5.0 0.8 0.7 0.6 0.5 Iout = 1.0 mA 0.4 Iout = 30 mA 0.3 Iout = 50 mA 0.2 Vout = 0.8 V ECO = L 0.1 0.0 0.0 6.0 INPUT VOLTAGE Vin (V) 1.0 2.0 3.0 4.0 5.0 INPUT VOLTAGE Vin (V) Figure 7. Output Voltage vs. Input Voltage Figure 8. Output Voltage vs. Input Voltage http://onsemi.com 3 6.0 NCP584 1.6 1.6 1.4 1.4 OUTPUT VOLTAGE Vout (V) OUTPUT VOLTAGE Vout (V) TYPICAL CHARACTERISTICS 1.2 1.0 0.8 0.6 Iout = 1.0 mA 0.4 Iout = 30 mA 0.2 Vout = 1.5 V ECO = H Iout = 50 mA 1.0 0.8 0.6 Iout = 1.0 mA 0.4 Iout = 30 mA 0.2 0.0 0 1 2 3 4 5 6 0 1 3 4 5 INPUT VOLTAGE Vin (V) Figure 9. Output Voltage vs. Input Voltage Figure 10. Output Voltage vs. Input Voltage 60 7 SUPPLY CURRENT, Isupply (mA) 8 50 40 30 20 Vout = 0.8 V ECO = H 10 1 2 3 4 5 5 4 3 2 Vout = 0.8 V ECO = L 1 0 0 6 1 60 7 SUPPLY CURRENT, Isupply (mA) 8 50 40 30 20 Vout = 1.5 V ECO = H 2 3 4 3 4 5 6 Figure 12. Power Supply Current vs. Input Voltage 70 1 2 INPUT VOLTAGE Vin (V) Figure 11. Power Supply Current vs. Input Voltage 10 6 6 INPUT VOLTAGE Vin (V) 0 0 2 INPUT VOLTAGE Vin (V) 70 0 0 SUPPLY CURRENT, Isupply (mA) Vout = 1.5 V ECO = L Iout = 50 mA 0.0 SUPPLY CURRENT, Isupply (mA) 1.2 5 6 5 4 3 2 0 0 6 Vout = 1.5 V ECO = L 1 INPUT VOLTAGE Vin (V) 1 2 3 4 5 6 INPUT VOLTAGE Vin (V) Figure 13. Power Supply Current vs. Input Voltage Figure 14. Power Supply Current vs. Input Voltage http://onsemi.com 4 NCP584 TYPICAL CHARACTERISTICS 0.83 OUTPUT VOLTAGE, Vout (V) OUTPUT VOLTAGE, Vout (V) 0.83 0.82 0.81 0.80 0.79 0.78 Vout = 0.8 V ECO = H 0.77 −50 −25 0 25 50 75 0.82 0.81 0.80 0.79 0.78 Vout = 0.8 V ECO = L 0.77 −50 100 −25 0 TEMPERATURE (°C) 1.52 1.52 OUTPUT VOLTAGE, Vout (V) OUTPUT VOLTAGE, Vout (V) 1.53 1.51 1.50 1.49 1.48 Vout = 1.5 V ECO = H −25 0 25 100 50 75 1.51 1.50 1.49 1.48 Vout = 1.5 V ECO = L 1.47 1.46 −50 100 −25 0 25 50 75 TEMPERATURE (°C) TEMPERATURE (°C) Figure 17. Output Voltage vs. Temperature Figure 18. Output Voltage vs. Temperature 100 0.6 DROPOUT VOLTAGE, VDO (V) 0.6 DROPOUT VOLTAGE, VDO (V) 75 Figure 16. Output Voltage vs. Temperature 1.53 1.46 −50 50 TEMPERATURE (°C) Figure 15. Output Voltage vs. Temperature 1.47 25 0.5 85°C 25°C 0.4 0.3 −40°C 0.2 0.1 Vout = 0.8 V ECO = H 0.0 0 25 50 75 100 125 150 175 0.5 25°C −40°C 0.3 0.2 0.1 Vout = 0.8 V ECO = L 0.0 0 200 85°C 0.4 25 50 75 100 125 150 175 200 OUTPUT CURRENT Iout (mA) OUTPUT CURRENT Iout (mA) Figure 19. Dropout Voltage vs. Output Current Figure 20. Dropout Voltage vs. Output Current http://onsemi.com 5 NCP584 0.40 0.40 0.35 0.35 0.30 DROPOUT VOLTAGE, VDO (V) DROPOUT VOLTAGE, VDO (V) TYPICAL CHARACTERISTICS 85°C 25°C 0.25 0.20 0.15 −40°C 0.10 Vout = 1.0 V ECO = H 0.05 0.00 0 25 50 75 100 125 150 175 85°C 0.30 25°C 0.25 0.20 −40°C 0.15 0.10 Vout = 1.0 V ECO = L 0.05 0.00 0 200 25 OUTPUT CURRENT Iout (mA) 100 125 150 175 200 Figure 22. Dropout Voltage vs. Output Current 0.30 DROPOUT VOLTAGE, VDO (V) 0.30 DROPOUT VOLTAGE, VDO (V) 75 OUTPUT CURRENT Iout (mA) Figure 21. Dropout Voltage vs. Output Current 0.25 85°C 0.20 25°C 0.15 0.10 −40°C 0.05 0.00 0 Vout = 1.5 V ECO = H 25 50 75 100 125 150 175 0.25 85°C 0.20 25°C 0.15 0.10 −40°C 0.05 Vout = 1.5 V ECO = L 0.00 0 200 25 OUTPUT CURRENT Iout (mA) RIPPLE REJECTION, RR (dB) Iout = 30 mA 70 60 50 Iout = 1.0 mA 40 30 0 0.1 100 125 150 175 200 90 80 10 75 Figure 24. Dropout Voltage vs. Output Current 90 20 50 OUTPUT CURRENT Iout (mA) Figure 23. Dropout Voltage vs. Output Current RIPPLE REJECTION, RR (dB) 50 Vout = 0.8 V Vin = 1.8 V + 0.2 Vp−p Cout = 2.2 mF, ECO = H 1 10 80 70 60 50 Iout = 1.0 mA 40 Iout = 30 mA 30 20 10 0 0.1 100 Vout = 0.8 V Vin = 1.8 V + 0.2 Vp−p Cout = 2.2 mF, ECO = L Iout = 50 mA 1 10 FREQUENCY, f (kHz) FREQUENCY, f (kHz) Figure 25. Ripple Rejection vs. Frequency Figure 26. Ripple Rejection vs. Frequency http://onsemi.com 6 100 NCP584 TYPICAL CHARACTERISTICS 90 90 Iout = 30 mA 50 40 Iout = 1.0 mA 30 20 Vout = 1.5 V Vin = 2.5 V + 0.2 Vp−p Cout = 2.2 mF, ECO = H 10 0 0.1 10 1 Iout = 30 mA 30 20 10 Iout = 50 mA 0 0.1 5 4 Input Voltage 3 ECO = H, Iout = 30 mA tr = tf = 5 ms, Cout = 1.0 mF 2 1 Output Voltage 5.0 0 10 20 30 40 50 60 70 80 90 5 Input Voltage 4.5 4.0 3.5 3.0 0 0.4 0.8 1.2 1.6 1 INPUT VOLTAGE, Vin (V) 2 Output Voltage 0 20 30 40 50 60 2.0 2.4 2.8 3.2 3.6 5.0 70 80 90 OUTPUT VOLTAGE, Vout (V) OUTPUT VOLTAGE, Vout (V) 3 ECO = H, Iout = 30 mA tr = tf = 5 ms, Cout = 2.2 mF 10 1 Output Voltage 2.0 0.0 100 4 Input Voltage 2.58 2.56 0 2 2.5 5 2.60 3 4.0 TIME, t (ms) 2.68 2.66 4 ECO = L, Iout = 10 mA tr = tf = 5 ms, Cout = 1.0 mF TIME, t (ms) 2.62 100 Figure 28. Ripple Rejection vs. Frequency 2.58 2.64 10 1 Figure 27. Ripple Rejection vs. Frequency INPUT VOLTAGE, Vin (V) OUTPUT VOLTAGE, Vout (V) 40 FREQUENCY, f (kHz) 2.60 2.56 0 Iout = 1.0 mA FREQUENCY, f (kHz) 2.66 2.62 50 100 2.68 2.64 60 5 4.5 4.0 3.5 3 ECO = L, Iout = 10 mA tr = tf = 5 ms, Cout = 2.2 mF 2 1 3.0 2.5 2.0 0.0 100 4 Input Voltage 0.4 0.8 1.2 1.6 TIME, t (ms) 2.0 2.4 TIME, t (ms) Figure 29. Input Transient Response (Vout = 2.6 V) http://onsemi.com 7 0 Output Voltage 2.8 3.2 3.6 4.0 INPUT VOLTAGE, Vin (V) 60 INPUT VOLTAGE, Vin (V) RIPPLE REJECTION, RR (dB) 70 Vout = 1.5 V 80 V = 2.5 V + 0.2 V in p−p 70 Cout = 2.2 mF, ECO = L OUTPUT VOLTAGE, Vout (V) RIPPLE REJECTION, RR (dB) 80 NCP584 TYPICAL CHARACTERISTICS 2.64 3 ECO = H, Iout = 30 mA tr = tf = 5 ms, Cout = 4.7 mF 2.62 2.60 2 1 Output Voltage 2.58 0 2.56 0 10 20 30 40 50 60 70 80 90 OUTPUT VOLTAGE, Vout (V) 4 Input Voltage INPUT VOLTAGE, Vin (V) 2.66 5.0 5 Input Voltage 4.5 4.0 3.5 4 3 ECO = L, Iout = 10 mA tr = tf = 5 ms, Cout = 4.7 mF 3.0 2 1 Output Voltage 2.5 2.0 0.0 100 INPUT VOLTAGE, Vin (V) 5 OUTPUT VOLTAGE, Vout (V) 2.68 0 0.4 0.8 1.2 1.6 TIME, t (ms) 2.0 2.4 2.8 3.2 3.6 4.0 TIME, t (ms) Figure 29. (continued) Input Transient Response (Vout = 2.6 V) 2.9 100 Load Current 2.8 ECO = H, Vin = 3.6 V Cin = 1.0 mF, Cout = 1.0 mF 0 10 4.0 Load Current 0 3.5 ECO = L, Vin = 3.6 V 3.0 Cin = 1.0 mF, Cout = 1.0 mF 2.5 2.6 Output Voltage 2.5 2.4 −2 20 0 2 4 6 8 10 Output Voltage 2.0 12 14 16 1.5 0.0 18 1.0 2.0 3.0 TIME, t (ms) 6.0 100 Load Current 2.8 50 ECO = H, Vin = 3.6 V Cin = 1.0 mF, Cout = 2.2 mF 0 4.5 7.0 20 LOAD CURRENT, Iout (mA) OUTPUT VOLTAGE, Vout (V) OUTPUT VOLTAGE, Vout (V) 150 2.9 10 4.0 Load Current 0 3.5 ECO = L, Vin = 3.6 V 3.0 Cin = 1.0 mF, Cout = 2.2 mF 2.5 2.6 Output Voltage 2.5 2.4 −2 5.0 TIME, t (ms) 3.0 2.7 4.0 0 2 4 6 8 10 Output Voltage 2.0 12 14 16 1.5 0.0 18 1.0 2.0 TIME, t (ms) 3.0 4.0 TIME, t (ms) Figure 30. Load Transient Response (Vout = 2.6 V) http://onsemi.com 8 5.0 6.0 7.0 LOAD CURRENT, Iout (mA) 2.7 50 4.5 LOAD CURRENT, Iout (mA) 150 LOAD CURRENT, Iout (mA) OUTPUT VOLTAGE, Vout (V) OUTPUT VOLTAGE, Vout (V) 3.0 NCP584 TYPICAL CHARACTERISTICS 2.9 100 Load Current 2.8 2.7 50 ECO = H, Vin = 3.6 V Cin = 1.0 mF, Cout = 4.7 mF 0 20 10 4.0 Load Current 0 3.5 ECO = L, Vin = 3.6 V 3.0 Cin = 1.0 mF, Cout = 4.7 mF 2.5 2.6 Output Voltage 2.5 2.4 −2 4.5 0 2 4 6 8 Output Voltage 2.0 10 12 14 16 1.5 0.0 18 1.0 2.0 TIME, t (ms) 3.0 4.0 5.0 6.0 LOAD CURRENT, Iout (mA) 150 LOAD CURRENT, Iout (mA) OUTPUT VOLTAGE, Vout (V) OUTPUT VOLTAGE, Vout (V) 3.0 7.0 TIME, t (ms) Figure 30. (continued) Load Transient Response (Vout = 2.6 V) 1.8 2.0 ECO = H, Vin = 1.8 V, Cin = 1.0 mF, Cout = 2.2 mF 1.2 1.5 0.6 1.0 0.0 0.5 Iout = 200 mA 0.0 0 10 20 30 40 50 60 2.5 2.4 VCE = 0 V to 1.8 V OUTPUT VOLTAGE, Vout (V) CE INPUT VOLTAGE, VCE (V) CE INPUT VOLTAGE, VCE (V) VCE = 0 V to 1.8 V 1.8 2.0 ECO = L, Vin = 1.8 V, Cin = 1.0 mF, Cout = 2.2 mF 1.2 0.6 1.0 0.0 70 1.5 Iout = 200 mA 0.5 0.0 0 TIME, t (ms) OUTPUT VOLTAGE, Vout (V) 2.5 2.4 100 200 300 400 500 600 700 TIME, t (ms) Figure 31. Turn−On/Off Speed with CE Pin (Vout = 0.8 V) 2.5 3.2 1.6 1.5 Iout = 200 mA 1.0 0.0 0.5 ECO = H, Vin = 2.5 V, Cin = 1.0 mF, Cout = 2.2 mF 0 10 20 30 40 50 0.0 60 2.4 2.0 1.6 1.5 0.8 Iout = 200 mA 0.0 70 0.5 ECO = L, Vin = 2.5 V, Cin = 1.0 mF, Cout = 2.2 mF 0 TIME, t (ms) Figure 32. Turn−On/Off Speed with CE Pin (Vout = 1.5 V) 9 0.0 100 200 300 400 500 600 700 TIME, t (ms) http://onsemi.com 1.0 OUTPUT VOLTAGE, Vout (V) 2.0 OUTPUT VOLTAGE, Vout (V) CE INPUT VOLTAGE, VCE (V) CE INPUT VOLTAGE, VCE (V) 2.4 0.8 2.5 3.2 VCE = 0 V to 2.5 V VCE = 0 V to 2.5 V NCP584 Vout = 1.3 V Iout = 0 mA 1.01 1.00 0.99 Iout = 1 mA 1.01 1.00 0.99 Iout = 10 mA Iout = 50 mA 1.00 0.99 0.98 1.00 0.99 0.98 Iout = 100 mA 1.01 1.00 0.99 Iout = 200 mA 0.0 3.0 2.0 1.0 0.0 VECO−0 V to 1.3 V ECO INPUT VOLTAGE, ECO−IN (V) OUTPUT VOLTAGE, Vout (V) 1.05 1.04 1.03 1.02 1.01 1.00 0.99 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TIME, t (ms) Vout = 2.0 V 1.05 1.04 1.03 1.02 1.01 1.00 0.99 VECO−0 V to 2.0 V 1.01 1.00 0.99 Iout = 10 mA OUTPUT VOLTAGE, Vout (V) Iout = 1 mA ECO INPUT VOLTAGE, ECO−IN (V) Iout = 0 mA 1.01 1.00 0.99 Iout = 50 mA 1.00 0.99 0.98 Iout = 100 mA 1.00 0.99 0.98 1.01 1.00 0.99 0.98 0.0 3.0 2.0 1.0 0.0 Iout = 200 mA 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TIME, t (ms) Figure 33. Output Voltage at Mode Alternative Point (Cin = 1.0 mF, Cout = 2.2 mF, 8.0 V, Vout = 1.0 V) http://onsemi.com 10 NCP584 APPLICATION INFORMATION Input Decoupling Output Decoupling A 1.0 mF tantalum capacitor is the recommended value to be connected between Vin and GND. For PCB layout considerations, the traces of Vin and GND should be sufficiently wide in order to minimize noise and prevent unstable operation. It is recommended to use a 2.2 mF or higher tantalum capacitor on the Vout pin. For better performance, select a capacitor with low Equivalent Series Resistance (ESR). For PCB layout considerations, place the output capacitor close to the output pin and keep the leads short as possible. ORDERING INFORMATION Nominal Output Voltage Marking Package Shipping† Active High, LP and FT Mode 0.9 109 SOT23−5 (Pb−Free) 3000 Tape & Reel NCP584HSN12T1G Active High, LP and FT Mode 1.2 112 SOT23−5 (Pb−Free) 3000 Tape & Reel NCP584HSN15T1G Active High, LP and FT Mode 1.5 115 SOT23−5 (Pb−Free) 3000 Tape & Reel NCP584HSN18T1G Active High, LP and FT Mode 1.8 118 SOT23−5 (Pb−Free) 3000 Tape & Reel NCP584HSN26T1G Active High, LP and FT Mode 2.6 126 SOT23−5 (Pb−Free) 3000 Tape & Reel NCP584HSN31T1G Active High, LP and FT Mode 3.1 131 SOT23−5 (Pb−Free) 3000 Tape & Reel NCP584LSN09T1G Active Low, LP and FT Mode 0.9 009 SOT23−5 (Pb−Free) 3000 Tape & Reel NCP584LSN12T1G Active Low, LP and FT Mode 1.2 012 SOT23−5 (Pb−Free) 3000 Tape & Reel NCP584LSN18T1G Active Low, LP and FT Mode 1.8 018 SOT23−5 (Pb−Free) 3000 Tape & Reel Device Output Type / Features NCP584HSN09T1G †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. http://onsemi.com 11 NCP584 PACKAGE DIMENSIONS SOT23−5 SN SUFFIX CASE 1212−01 ISSUE O A 5 E 1 A2 0.05 S B D A1 4 2 NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DATUM C IS A SEATING PLANE. L 3 E1 L1 B e e1 C 5X 0.10 M C B S A S C DIM A1 A2 B C D E E1 e e1 L L1 MILLIMETERS MIN MAX 0.00 0.10 1.00 1.30 0.30 0.50 0.10 0.25 2.80 3.00 2.50 3.10 1.50 1.80 0.95 BSC 1.90 BSC 0.20 −−− 0.45 0.75 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 12 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. NCP584/D