NJU6539 PRELIMINARY 1/8, 1/9, 1/10 Duty BITMAP LCD DRIVER with KEY SCAN GENERAL DESCRIPTION The NJU6539 is a 10-common x 65-segment bitmap LCD driver to display graphics or characters. It contains 650 bits display data RAM, microprocessor interface circuit, common and segment drivers, key scan circuit, and general output ports. An image data from MPU through the serial interface is stored into the 650 bits internal displayed on the LCD panel through the commons and segments drivers. The NJU6539 displays 10 x 65 dots graphics or 11-character 1-line by 5 x 7 dots character + 3 x 65 dots icons. It contains key scan circuit transmitting the 25-keys maximum (5 x 5 = 25) to MPU. Also it provides 4 general purpose output ports with PWM output function maximum to drive LEDs or others directly. Furthermore, the NJU6539 can select a LCD driving voltage out of 16 steps voltage by the instruction adjust the display contrast of LCD panel. PACKAGE OUTLINE NJU6539FG1 NJU6539FC2 FEATURES Direct Correspondence between Display Data RAM and LCD Pixel Display Data RAM : 650-bits LCD Drivers : 65-seg, 10-com Serial interface (SIO, SCL, CS) Programmable Duty Ratio 1/8 Duty, 1/9 Duty, 1/10Duty Bias Ratio 1/4 bias 25-key scan Function (5 x 5 matrix) Needless for anti-reverse current diodes in key scan General Output Ports with 128-steps PWM output (possible LED driving) maximum 4-ports Useful Instruction Set Display ON/OFF, Page Address Set, Column Address Set, ADC Select, Inverse Display ON/OFF, whole display ON/OFF, Reset, EVR Register Set, Duty Select, Power Save mode set, General Output Port set, General Output Port PWM data set, PWM slope set, PWM program Execute, General Output Port / Key scan output select, Display Data write, Bleeder Resistance On-chip Software Contrast Control (16 steps) Operating Voltage Logic Operating Voltage 2.7 to 5.5V LCD Driving Voltage 5.0 to 10.0V Package Outline QFP100-G1 QFP100-C2 C-MOS Technology (Substrate: P) Ver.2004-03-01 -1- SCL SIO SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 Po3 Po2 Po1 COM10 COM9 COM8 COM7 COM6 COM5 COM4 COM3 COM2 COM1 SEG65 SEG64 SEG63 SEG62 SEG61 SEG60 SEG59 SEG58 SEG57 SEG56 SEG55 SEG54 SEG53 SEG52 SEG51 SEG50 SEG49 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 COM10 COM9 COM8 COM7 COM6 COM5 COM4 COM3 COM2 COM1 SEG65 SEG64 SEG63 SEG62 SEG61 SEG60 SEG59 SEG58 SEG57 SEG56 SEG55 SEG54 SEG53 SEG52 SEG51 NJU6539 PIN CONFIGRATION Po1 Po2 Po3 S1/Po4 S2 S3 S4 S5 K1 K2 K3 K4 K5 VDD VLCD1 VLCD2 V0 V1 V2 VSS OSC RESb CE SCL SIO S1/Po4 S2 S3 S4 S5 K1 K2 K3 K4 K5 VDD VLCD1 VLCD2 V0 V1 V2 VSS OSC RESb CE -2- NJU6539FG1 NJU6539FC2 SEG50 SEG49 SEG48 SEG47 SEG46 SEG45 SEG44 SEG43 SEG42 SEG41 SEG40 SEG39 SEG38 SEG37 SEG36 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 SEG28 SEG27 SEG26 SEG48 SEG47 SEG46 SEG45 SEG44 SEG43 SEG42 SEG41 SEG40 SEG39 SEG38 SEG37 SEG36 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 Ver.2004-03-01 NJU6539 SEG63 SEG64 SEG65 SEG1 SEG2 SEG3 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 COM10 BLOCK DIAGRAM VLCD1 E.V.R. Segment Driver Common Driver VLCD2 V0 V2 VSS Ver.2004-03-01 Display Data RAM Input Buffer Column Address Decoder Key Data Buffer Po3 Po2 Po1 General Output Driver Po4/S1 Key Scan Control S5 S4 S3 S2 Serial I/F K1 K2 K3 K4 K5 RESET CE Power ON Reset Reset RESb Timing Generator SIO Oscillator SCL OSC Instruction Data Buffer Page Address Decoder Instruction Decoder V1 -3- NJU6539 TERMINAL DESCRIPTION No. FG1 FC2 1 to 65 3 to 67 66 to 72 68 to 74 73 to 75 75 to 77 Symbol I/O Description SEG1 to SEG65 COM1 to COM7 COM8 to COM10 O O O Segment output terminal. Common output terminal. Icon common output terminal. General output port 128-step PWM waveform output by MPU control. General output port / Key scanning input terminal Select General output port or Key scanning input terminal by the instruction. A function must be selected either Po3 or S0 76 to 78 78 to 80 Po1 to Po3 O 79 81 Po4/S1 O General output port 128-step PWM waveform output by MPU control. Key scanning input terminals (No need for anti-reverse current diode in key scan) 80 to 83 82 to 85 S2 to S5 O 84 to 88 86 to 90 K1 to K5 I 89 90 91 92 93 94 95 91 92 93 94 94 96 97 VDD VLCD1 VLCD2 V0 V1 V2 VSS I -4- I - 96 98 OSC I/O 97 99 RESb I 98 99 100 100 1 2 CE SCL SIO I I I/O Key scanning input terminals. (No need for anti-reverse current diode in key scan) Key scanning input terminals. (with internal pull-down resistor) Power supply terminal.(2.7V to 5.5V) LCD driving voltage input terminal. LCD driving voltage stabilization capacitor terminals. Connect the capacitor between each terminal and Vss. Ground terminal. Osclator terminal. Conect the external resistor. Reset terminal. (with internal pull-up resistor) In case of only Power-on Reset should be open. Chip enable terminal Serial clock input terminal Serial Data input or output terminal Ver.2004-03-01 NJU6539 APPLICATION CIRCUIT VDD VDD COM1 VSS COM10 RESb CE SC SIO SEG1 ---- *1 VSS MPU VLCD1 VLCD2 V0 V1 V2 VLCD *3 *3 *3 *3 ---- *2 NJU6539 *3 VSS 10com 65seg matrix LCD panel SEG65 General output ports Po1 Po2 Po3 Po4/S1 VSS OSC Po4/S1 S2 S3 S4 S5 K1 K2 K3 K4 K5 5 x5 key matrix *4 *1 *2 *3 *4 The rising time of Power source voltage at Power on and the falling time at Power off must keep over than 1ms because of Voltage detection type Reset circuit operation. SO terminal requires external pull-up resistor connecting to Power source of external MPU because of Open-drain type output. This capacitor for bias voltage stabilization should be connected in accordance with display quality in application. PO3 / S0 terminal is general output ports and Key scan signal output duplicated-function terminals. A function must be selected either Segment output or other. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. Ver.2004-03-01 -5-