NUF2240W1 2 Line EMI Filter with ESD Protection This device is a 2 line EMI filter array for wireless applications. Greater than −20 dB attenuation is obtained at 800 MHz. It also offers ESD protection−clamping transients from static discharges. ESD protection is provided across all capacitors. http://onsemi.com Features • EMI Filtering and ESD Protection • Integration of 11 Discrete Components • Compliance with IEC61000−4−2 (Level 4) Pin 6 Output(1) Pin 5 VCC Pin 4 Output(2) Pin 1 Input(1) Pin 2 GND Pin 3 Input(2) > 8.0 kV (Contact) • SC−88/SOT−363 Package • Moisture Sensitivity Level 1 • ESD Ratings: Machine Model = C • Human Body Model = 3B This is a Pb−Free Device MARKING DIAGRAM Benefits • Reduces EMI/RFI Emissions on a Data Line • Integrated Solution Offers Cost and Space Savings in a 6 SC−88/SOT−363 Package • Reduces Parasitic Inductances Which Offer a More “Ideal” Low Pass 1 SC−88 CASE 419B Filter Response 1 • Integrated Solution Improves System Reliability 24 = Specific Device Code M = Month Code G = Pb−Free Package (Note: Microdot may be in either location) Applications • • • • • 24 M G G EMI Filtering and ESD Protection for Data Lines Wireless Phones PDAs and Handheld Products Notebook Computers LCD Displays ORDERING INFORMATION Device Package Shipping† NUF2240W1T1G SC−88 (Pb−Free) 3000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2005 June, 2005 − Rev. 1 1 Publication Order Number: NUF2240W1/D NUF2240W1 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Symbol Parameter ESD Discharge IEC61000−4−2 Value VPP Unit kV Air Discharge Contact Discharge 15 8.0 Steady−State Power per Resistor PR mW Steady−State Power per Package PT mW Operating Temperature Range TOP −40 to 85 °C Storage Temperature Range TSTG −55 to 150 °C TL 260 °C Maximum Lead Temperature for Soldering Purposes (1.8 in from case for 10 seconds) Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Parameter Maximum Reverse Working Voltage Breakdown Voltage Symbol Test Conditions Min Typ VRWM Unit 5.0 V 1.0 A 115 VBR IR = 1.0 mA Leakage Current IR VRWM = 3.0 V Resistance RA IR = 20 mA Capacitance (Notes 1 and 2) Cd VR = 2.5 V, f = 1.0 MHz 17 pF Cut−Off Frequency (Note 3) f3dB Above this frequency, appreciable attenuation occurs 125 MHz 1. Measured at 25°C, VR = 2.5 V, f = 1.0 MHz. 2. Total line capacitance is 2 times the Diode Capacitance (Cd). 3. 50 source and 50 load termination. http://onsemi.com 2 6.0 Max 85 7.0 100 V NUF2240W1 2 NORMALIZED CAPACITANCE 0 −5 −15 −20 −25 −30 1.E+06 1 0.5 0 1.E+07 1.E+08 1.E+09 1.E+10 0 1 2 3 4 FREQUENCY (Hz) REVERSE VOLTAGE (V) Figure 1. Insertion Loss Characteristic (50 W Source and 50 W Lead Termination) Figure 2. Typical Capacitance vs. Reverse Biased Voltage (Normalized Capacitance, Cd @ 2.5 V) 110 108 106 RESISTANCE () S21 (dB) −10 1.5 104 102 100 98 96 94 92 90 −40 −20 0 20 40 60 TEMPERATURE (°C) Figure 3. Typical Resistance over Temperature http://onsemi.com 3 80 5 NUF2240W1 PACKAGE DIMENSIONS SC−88/SC70−6/SOT−363 CASE 419B−02 ISSUE V D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419B−01 OBSOLETE, NEW STANDARD 419B−02. e 6 5 4 HE DIM A A1 A3 b C D E e L HE −E− 1 2 3 b 6 PL 0.2 (0.008) M E M A3 MILLIMETERS MIN NOM MAX 0.80 0.95 1.10 0.00 0.05 0.10 0.20 REF 0.10 0.21 0.30 0.10 0.14 0.25 1.80 2.00 2.20 1.15 1.25 1.35 0.65 BSC 0.10 0.20 0.30 2.00 2.10 2.20 INCHES NOM MAX 0.037 0.043 0.002 0.004 0.008 REF 0.004 0.008 0.012 0.004 0.005 0.010 0.070 0.078 0.086 0.045 0.049 0.053 0.026 BSC 0.004 0.008 0.012 0.078 0.082 0.086 MIN 0.031 0.000 C A A1 L SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm Ǔ ǒinches SC−88/SC70−6/SOT−363 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. NUF2240W1/D